The contact owns a 2011 BMW 328I. The contact stated that while driving at an undisclosed speed, there was a rattling sound coming from under the hood. The check engine warning light illuminated. The vehicle was diagnosed by an independent mechanic that the bolts were missing from the exhaust VANOS camshaft unit side and the other bolts had backed out on the intake side and needed to be replaced. The dealer was notified of the failure and the contact was informed that no recall existed for VANOS bolts. The vehicle was not repaired. The manufacturer was notified of the failure and the contact was informed that the VIN was not included in a recall. The failure mileage was approximately 119,000.
2011 BMW 328I engine complaints
Page 7 of 13: complaints 161 to 190 of 365, newest first, as owners wrote them.
Due to this recall other parts of my vehicle are failing and it is frustrating that my vehicle overheats regularly especially when it is hot outside. The recall has been for a year but BMW has not come up with a remedy for this problem. We had to pay $951.67 in 2022 to get our vehicle inspected but they said if the recall was fixed I would not have had the issue I had. Please push BMW to fix this issue.
The contact owns a 2011 BMW 328I. The contact stated that while driving at an undisclosed speed, the check engine warning light illuminated. The contact also stated that the vehicle stalled while starting during colder weather. The contact received notification of the federal safety agency Campaign Number: 17V676000 (Electrical System) and 22V119000 (Engine and Engine Cooling). The contact made a local dealer aware of the failure and the recall notification; however, the contact was directed to contact the manufacturer for further assistance with towing the vehicle or driving out of state to be serviced. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the issue but was unable to provide further assistance. The approximate failure mileage was 80,000.
The camshaft gear bolts on my car broke causing it to stall in a roadway. Upon further investigation BMW did issue a recall for this very well known problem to them however they decided to EXCLUDE the station wagon models. All of these cars have the exact same engine whether its the coupe, sedan, or convertible. All the same exact engine. My car is a station wagon which was excluded. This is a major issue for all owners of these cars. BMW used aluminum bolts in this location and they end up shearing off causing major engine damage. BMW needs to remedy this issue by adding the station wagon cars to the recall. This problem should have been fixed years ago.
The contact owns a 2011 BMW 328I.The contact received notification of the federal safety agency Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
The contact's son owns a 2011 BMW 328I. The contact stated that while her son was driving approximately 25 MPH, the vehicle stalled in the middle of the road. The contact's son attempted to restart the vehicle numerous times, but the vehicle would not start. The contact stated that her son was not aware of any warning lights being illuminated. The contact had the vehicle towed to a local dealer, where it was diagnosed and determined that the VANOS bolts and VANOS unit needed to be replaced. The vehicle had not been repaired. The contact researched online and related the failure to the federal safety agency Campaign Number: 14V176000 (Engine and Engine Cooling). The manufacturer had been informed of the failure. The failure mileage was approximately 160,000.
The contact owns a 2011 BMW 328I. The contact stated that while driving at various speeds, the vehicle was losing motive power with the check engine warning light and three other unknown warning lights illuminated. The contact stated that the vehicle was able to restart after multiple attempts. The contact also stated that the vehicle felt hot inside despite not using the heater. The contact received notification of the federal safety agency Campaign Number: 22V119000 (Engine and Engine Cooling). The contact made a local dealer aware of the issue and the failure; however, the dealer did not provide towing assistance for the vehicle to be taken for the recall repair. The vehicle was not repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 174,000.
The contact owns a 2011 BMW 328I. The contact stated that on several occasions while driving at various speeds or while the vehicle was idling, the vehicle intermittently stalled. The contact then stated that previously, he was able to turn off and restart the vehicle however, the vehicle recently failed to restart. The check engine and service engine soon warning lights were illuminated. The contact stated that he towed the vehicle himself to an independent mechanic where it was diagnosed that the starter needed to be replaced; however, the failure recurred. The contact then stated that the vehicle remained at the independent mechanic and was diagnosed, and it was determined that the camshaft bolts failed and needed to be replaced. The vehicle was not repaired. The dealer was not notified of the failure. The contact referenced the federal safety agency Campaign Number: 14V176000 (Engine and Engine Cooling). The manufacturer was notified of the failure and the contact was informed that the VIN was not included in a recall and advised the contact to call the federal safety agency Hotline. The failure mileage was approximately 91,000.
The contact owns a 2011 BMW 328I. The contact stated that while driving at various speeds, the vehicle jerked and hesitated while depressing the accelerator pedal. There was no warning light illuminated. The contact pulled over, called her husband, and he drove the vehicle to the residence. An independent mechanic was called to the residence and the mechanic discovered that bolts on the camshaft were loosened. Upon investigation, the failure was linked to the federal safety agency Campaign Number: 14V176000 (Engine and Engine Cooling). Both the dealer and the manufacturer were notified of the failure, and both informed her that the vehicle was not under recall. The vehicle was not repaired. The failure mileage was unknown.
The contact owns a 2011 BMW 328I. The contact stated while driving 20 MPH, the vehicle stalled inadvertently. The check engine warning light was illuminated. The contact was unable to veer to the side of the road. The vehicle failed to restart. The vehicle was towed to the residence. The contact stated he was able to diagnose the vehicle using an OBD reader. The contact diagnosed that the failure was related to the intake VANOS camshaft housing. The contact related the failure to the federal safety agency Campaign Number: 14V176000 (Engine and Engine Cooling). The dealer and the manufacturer were notified of the failure and informed the contact that the vehicle could not be repaired under the recall because the VIN was not included. The vehicle was not repaired. The failure mileage was approximately 85,000. The contact stated that the defective parts and the vehicle make and model year are a part of the recall yet the manufacturer says it's not.
The contact owns a 2011 BMW 328I. The contact received notification of the federal safety agency Campaign Number 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2011 BMW 328I. The contact received notification of the federal safety agency Campaign Number: 22V1190000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The local dealer was notified of the issue and confirmed that the parts were not yet available. The manufacturer was notified of the issue and the contact was informed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.
My Vehicle has been on Recall since March 2, 2022. There are increasing problems and an occasional smoke and burning smell. This is effecting me getting an inspection and registering my vehicle.
The contact owns a 2011 BMW 328I. The contact received notification of the federal safety agency Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
BMW has Recall: #22V‑119:407 - POSITIVE CRANKCASE VENTILATION (PCV) VALVE HEATER still open with no remedy in sight. It has been months if not a year already (or longer) and I am waiting, together with thousands of BMW owners to get this issue fixed. It is totally unacceptable that a company as BMW leaves their customers hanging and allowing them to drive unsafe cars due to their laziness to fix this. What is the federal safety agency going to do about this? Thanks. Happy New Year!
* What component failed: The VANOS gear bolts broken on the 2011 BMW 328i. *How was your safety put at risk? The car will suddenly stall during high speed driving that risk some car will hint from behind or high possibility of lost the control. The car stall and shaking very bad during high speed driving *Has the problem been confirmed by dealer and independent service center. Yes. It was confirmed by dealer and independent service center. There are four broken bolts were discovered on the oil pan. The broken bolts were come from VANOS gear. *The vehicle has inspected by BMW dealer and independent service. *Check Engine light was on. No symptoms of the problem prior to the failure. After failure, the symptom is the car stalls during driving. The attached doc include the recall related to VANOS assembly bolts. However, the BMW refuse to take responsibility for recall my car to fix the problem and failed to notice me for the recall until the car failure due to this VANOS problem. I visited BMW dealer so many times and dealer is not notified me for this recall.
.
The contact owns a 2011 BMW 328I. The contact received notification of the federal safety agency Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The contact stated that while starting the vehicle, there was an abnormal burning plastic odor detected. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was approximately 35,000. VIN tool confirms parts not available.
The contact owns a 2011 BMW 328I. The contact received notification of the federal safety agency Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount time for the recall repair. The contact stated that she noticed smoke outside of the vehicle and she smelled an abnormal burning odor. The vehicle was not diagnosed or repaired. No warning light was illuminated. The local dealer was notified of the recall notification and confirmed that the parts were not yet available. The manufacturer was not notified. The failure mileage was unavailable. VIN tool confirms parts not available.
The contact owns a 2011 BMW 328I. The contact received notification of the federal safety agency Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The contact stated while driving approximately 30 MPH, the heater was activated, and she smelled an odor of burning plastic inside the vehicle. The contact stated that once the weather turned colder, while using the heater, the odor was inside the vehicle. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 69,500. VIN tool confirms parts not available.
The contact owns a 2011 BMW 328I. The contact received notification of the federal safety agency Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2011 BMW 328I. The contact received notification of the federal safety agency Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available
The contact owns a 2011 BMW 328I. The contact stated that upon driving from a complete stop, the vehicle lost motive power and stalled. There was no warning light illuminated. The vehicle was towed the dealer where it was diagnosed that the camshaft adjuster bolts had backed out, causing the camshaft VANOS failure. Additionally, it was diagnosed that the camshaft VANOS and camshaft adjuster bolts needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure and referred the contact to the federal safety agency hotline. The failure mileage was approximately 84,500.
This car has a heater problem with the PCV that causes the car to not run in cold weather. The PCV fails intermittently and the car will not idle or run in cold weather. BMW issued this recall in March but it is not November and they have offered no fix for this. It is a safety issue and it's also affecting how the car runs. How could we be 8 months into this without a fix?
The contact owns a 2011 BMW 328I. The contact received notification of the federal safety agency Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. Additionally, the contact had experienced a failure of the four VANOS housing bolts for both VANOS units (intake and exhaust) under the federal safety agency Campaign Number: 14V176000 (Engine and Engine Cooling). The contact stated that his vehicle was not included in the recall; however, the vehicle exhibited the failure listed in the recall similar concerning the reduced engine power. The vehicle was not taken to be diagnosed or repaired. The manufacturer had been informed of the failure. The failure mileage was approximately 190,000.
Recall was issued March 2022. The remedy is still not available.
My 2011 328i convertible has the Vanos Cam shaft bolts broken, and the dealership never said anything about the recall for this issue. When I brought it to their attention they gave me a bill for $800 to find what I told them was wrong with the car. For the 10 years I had the car I have only use one dealership for repairs, and had an additional warranty on my vehicle and NOTHING was said about the bolt heads breaking off on the sprocket cam
The contact owns a 2011 BMW 328XI. The contact received notification of the federal safety agency Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted several times. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2011 BMW 328i. The contact received notification of the federal safety agency Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact then stated that he noticed that the front passenger’s side interior door handle disintegrated. The vehicle was taken to an independent mechanic where it was diagnosed that the door handle melted and needed to be replaced. Additionally, the local dealer was notified of the recall notice and confirmed that the parts were not available for the recall repair however, the contact was advised to call the manufacturer. The contact was concerned that touching the door handle could cause harm to a passenger touching the door handle and could catch fire. The vehicle was not repaired. The manufacturer was notified of the failure and was informed that the repair was being developed and the contact was advised to call the federal safety agency Hotline. The failure mileage was approximately 80,000. Parts distributions disconnect.
The contact owns a 2011 BMW 328I. The contact stated while driving at an unknown speed, there was an abnormal burning odor coming from the vehicle. There was also smoke entering the cabin of the vehicle through the vents. The contact stated no warning light was illuminated. The contact took the vehicle to the local dealer, but they were unable to diagnose the vehicle. The vehicle was not repaired. The contact continued to experience the failure. The contact took the vehicle to an independent mechanic, where it was diagnosed with needing the Positive Crankcase Ventilation (PCV) valve heater to be replaced. The vehicle was not repaired. The contact received notification of the federal safety agency Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. VIN tool confirms parts not available. The failure mileage was approximately 102,000.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2011 BMW 328I?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history