Car jyst shut down in the middle of the street without any dashbord lights, strange noises or symptoms. Won't turn over. After tow to BMW dealer they said oil pump broke. I took it to volvo dealer they said oil starvation. They changed design of oil pump drive but don't inform anybody to do it which is very unacceptable. And they should do recall on that. That was very dangerous situation. This oil pump very slowly desteoys without any symptoms. It's really ticking time bomb becouse they now it quietly change design.Thank you.
The worst 2014 BMW 428I problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
- Engine19
- Electrical16
- Brakes8
- Fuel system8
- Lights3
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
- Engine19
- Electrical16
- Brakes8
- Fuel system8
- Lights3
- Body2
- Steering2
- Acceleration1
- Driver assistance1
- Transmission1
- Visibility1
Recalls 6
Air bags: side/window: head
- What is wrong
- BMW of North America, LLC (BMW) is recalling certain 2014 4 Series Coupe (428i, 428i xDrive, 435i, 435i xDrive), 3 Series Sedan (320i, 320i xDrive, 328i, 328i xDrive, 335i, 335i xDrive), and 2014-2015 2 Series Coupe (228i, 228i xDrive, M235i, M235i xDrive) vehicles. The head air bag inflator may fail at the weld joint, which can cause gas to leak from the inflator or result in an inflator rupture.
- Risk
- An inflator that ruptures may cause sharp metal fragments to enter or exit the vehicle, increasing the risk of injury. Additionally, an inflator that leaks gas may only partially inflate during a crash, increasing the risk of injury.
- Remedy
- Dealers will replace the head air bags, free of charge. Owner notification letters were mailed February 12, 2026. Owners may contact BMW customer service at 1‑800‑525‑7417.
Recall number 25V871000 · Recall details
Electrical system: wiring: connectors/plugs/receptacles
- What is wrong
- BMW of North America, LLC. (BMW) is recalling certain 2012-2015 X1 sDrive28i, X1 xDrive28i, 2012-2016 Z4 sDrive28i, 528i, 528i xDrive, 328i, 328xi, 2016-2018 X5 xdrive 40e, 2014-2016 228i, 228xi, 428i, 428i xDrive, 328xi Gran Turismo, 2013-2017 X3 sDrive28i, X3 xDrive28i, 2015-2018 X4 xDrive28i, 2015-2016 428xi vehicles. An improperly sealed electrical connector on the water pump may be exposed to water and short circuit.
- Risk
- An electrical short increases the risk of a fire.
- Remedy
- Dealers will inspect and replace the water pump and plug connector as necessary, and install a protective shield, free of charge. Owner notification letters were mailed on March 28, 2025. Owners may contact BMW customer service at 1‑800‑525‑7417.
Recall number 24V608000 · Recall details
Air bags: frontal: driver side: inflator module
- What is wrong
- BMW of North America, LLC (BMW) is recalling certain 2015 6 Series Gran Coupe, 2014 5 Series Gran Turismo, 2014 5 Series Sedan, 2015 6 Series Convertible, 2015 6 Series Coupe, 2014 X5, 2013-2014 X3, 2014-2015 3 Series Sedan, 2014 4 Series Coupe, 2014 4 Series Convertible, 2014 3 Series Gran Turismo, and 2015 4 Series Gran Coupe vehicles. Please see the recall report for the complete list of models. The driver's air bag inflator may explode during deployment, due to a manufacturing defect.
- Risk
- An inflator explosion may result in sharp metal fragments striking the driver or other occupants, increasing the risk of injury or death.
- Remedy
- The driver's front air bag will be replaced, free of charge. Owner notification letters were mailed September 6, 2024. Owners may contact BMW customer service at 1‑800‑525‑7417.
Recall number 24V527000 · Recall details
Air bags: side/window
- What is wrong
- BMW of North America, LLC (BMW) is recalling certain 2014-2015 2 Series Coupe (228i, 228i xDrive, M235i), 3 Series Sedan (320i, 320i xDrive, 328i, 328i xDrive, 335i, 335i xDrive, M3, 328d, 328d xDrive), 4 Series Coupe (428i, 428i xDrive, 435i, 435i xDrive, M4), and 2015 4 Series Gran Coupe (428i, 428i xDrive, 435i, 435i xDrive) vehicles. The head air bag inflator may fail at the weld joint, which can cause gas to leak from the inflator or result in an inflator rupture.
- Risk
- An inflator that ruptures may cause sharp metal fragments to enter or exit the vehicle, increasing the risk of injury. Additionally, an inflator that leaks gas may only partially inflate during a crash, increasing the risk of injury.
- Remedy
- Dealers will replace the head air bags, free of charge. Owner notification letters were mailed November 4, 2024. Owners may contact BMW customer service at 1‑800‑525‑7417.
Recall number 24V288000 · Recall details
Fuel system, gasoline: delivery: fuel pump
- What is wrong
- BMW of North America LLC (BMW) is recalling certain model year 2014 228i Coupe, M235i Coupe, 320i, 320xi, 328i, 328xi, 335i, 335xi, ActiveHybrid 3, 328xi Sports Wagon, 428i Coupe, 428xi Coupe, 435i Coupe, 435xi Coupe, 428i Convertible, 428xi Convertible, 435i Convertible, 328xi Gran Turismo, 335xi Gran Turismo, and 2015 428i Gran Coupe, 428xi Gran Coupe, and 435i Gran Coupe vehicles. Improper nickel plating of components within the fuel pump may result in the fuel pump failing.
- Risk
- If the fuel pump fails, the vehicle may stall without warning, increasing the risk of a crash.
- Remedy
- BMW will notify owners, and dealers will replace the fuel pump, free of charge. Owners were mailed interim notices on May 28, 2015. The recall began on July 6, 2015. Owners may contact BMW customer service at 1‑800‑525‑7417.
Recall number 15V189000 · Recall details
Service brakes, hydraulic: power assist: vacuum: hoses, lines/piping, and fittings
- What is wrong
- BMW of North America LLC (BMW) is recalling certain model year 2014 BMW 328i xDrive Sports Wagon, 2012-2014 BMW 320i Sedan, 328i Sedan, 320i xDrive Sedan, 328i xDrive Sedan, 2012-2013 BMW 528i Sedan, 528i xDrive Sedan, 2013-2014 BMW X1 sDrive28i, X1 xDrive28i Sports Activity Vehicle, 2013-2014 BMW X3 xDrive28i Sports Activity Vehicle, 2012-2014 BMW Z4 sDrive28i Roadster, and 2014 BMW 428i Coupe, and 428i xDrive Coupe. Due to insufficient lubrication, the vacuum pump that supplies brake power assistance may fail. Note: This recall is an expansion of recall 13V‑454.
- Risk
- A failure of the brake vacuum pump results in a reduction in braking power that could increase the risk of a crash.
- Remedy
- BMW will notify owners, and dealers will install a locking ring in the camshaft to retain the camshaft seal disk in the proper location, free of charge. The recall began on December 2, 2014. Owners may contact BMW customer service at 1‑800‑525‑7417.
Recall number 14V627000 · Recall details
See all 6 recalls for the 2014 BMW 428I
Defect investigations
Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
EA21002
Technical service bulletins for the 2014 BMW 428I 422
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- The coverage period for qualifying lower rear side panel water drain repair that addresses the issues...
- Fuel tank limited warranty for leakage, due to defects in materials or workmanship, has been extended to...
- Right Tie Rod Return
- The basic conditions for initializing the power windows are not met.
- The electrical system of BMW vehicles has been subject to an ongoing development process over the last few...
- The paint finish on the door jamb (above the door striker) is scratched due to the inner door cavity...
- ?The front seat will not calibrate/initialize, and the stored faults cannot be deleted.
- After programming the head unit (HU-H2), activating the FSC (German word Freischaltcode) Enabling Codes...
- Exterior rear lights do not work.
- The 3G network in the US has been shut down
2014 BMW 428I fuel economy
Official EPA estimates in miles per gallon (MPGe for electric). Ranges cover trims that share the same engine.
| Engine | Drive | City | Highway | Combined |
|---|---|---|---|---|
| 2.0L 4‑cyl | RWD | 22-23 | 33-34 | 26-27 |
| 2.0L 4‑cyl | AWD | 21-22 | 32 | 25-26 |
What 2014 BMW 428I owners say
Most recent owner complaints, unedited.
I have tried reaching BMW USA 3-4 times since November 2024 until now. The representative said BMW is working on correcting the problem. I have CC the email that was sent this June 2025 with no replies. 1 year has passed since the recall was issued and BMW USA has not created a remedy/fix for the coolant problem. I had this car on the TURO car rental platform as I am a host on TURO. I can't list this car to rent out because of the recall. Turo will not allow owners of recalled cars to list their cars because the car could be "potentially unsafe." Yet, the "owner" is driving these "unsafe"' cars on the road. I did my part. I already sent another recent email to get a solution. What would be my next step? (Almost one year now....) Also, I am sending this email Pacific time at 5:07 WED., July 30th. On the document: the Update IS on THURSDAY JULY 31st. WHAT???!!!!! Make it make sense . Frustrated OWNER
the recall was dated 12 August 2024. To date BMW North America has not provided the parts needed to effect the repair. it has been 10 months since the recall. BMW NA is dragging its feet. it is time something is done to require BMW NA to fix the problem,
The contact owns a 2014 BMW 428I. The contact received notification of the federal safety agency Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The manufacturer has failed or is unable to remedy this safety recall for my vehicle in a timely manner. Issue: 1 open recall since Aug 13, 2024 for: ENGINE COOLANT PUMP: The electrical connector of the engine coolant pump could become damaged. Small drops of liquid from the positive crankcase ventilation (PCV) system could drip down onto the electrical connector of the pump.
The contact owns a 2014 BMW 428I. The contact stated that while driving approximately 65 - 70 MPH and attempting to change lanes, the vehicle lost power steering functionality. The message “Chassis Unstable” was displayed on the instrument panel. The contact used excessive force to steer the vehicle to pull over to the side of the road to inspect the vehicle. The contact was unable to find the cause of failure and continued to drive the vehicle without power steering functionality. The message of an excessive power drain for the battery was displayed. The vehicle was unable to switch to different settings, such as Sport 1, Sport 2, and Eco Pro due to the drive setting remaining stuck in Comfort Mode. The cruise control failed intermittently. While driving approximately 65 -70 MPH, the contact noticed a burning plastic odor coming from the front-end of the vehicle into the cabin. After arriving at the destination and inspecting underneath the hood of the vehicle, the contact noticed that the terminal door for the jumper cables and the housing were smoking. Additionally, there were burned areas surrounding the battery. The vehicle was taken to the dealer, who diagnosed that the electronic control module had failed and needed to be replaced. The vehicle was not repaired. The contact became aware of the federal safety agency Campaign Number: 16V704000 (Steering); however, the VIN was not included. The manufacturer was informed of the failure. The manufacturer referred the contact to the federal safety agency Hotline to report the failure. The failure mileage was approximately 80,000.
Car shut down and is believed to be a lemon car, and continuously leaks in spite being serviced on numerous occasions.
The contact owns a 2014 BMW 428I. The contact stated that the vehicle was experiencing a significant oil leak. The contact stated that upon parking the vehicle, the contact noticed that a significant amount of oil was leaking onto the ground. The vehicle was taken to Crescent Automotive, where it was purchased. The vehicle was then taken to C&C Automotive, where a synthetic oil change was performed. The vehicle was taken to an independent mechanic, where the filter, the drain plug, the drain plug gasket, and the air filter were replaced; however, the failure recurred. The vehicle was taken to a local Pep Boys, where the oil leak was evaluated, but the vehicle was not repaired. The vehicle was taken to a BMW dealer, where an unknown service was performed; however, the failure persisted. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 99,099.
The contact owns a 2014 BMW 428I. The contact received notification of the federal safety agency Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2014 BMW 428I. The contact received notification of the federal safety agency Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that while idling in traffic on the highway, the temperature gauge indicated that the engine was running extremely hot. The message "Engine Over temperature - Stop Carefully" was displayed. The contact pulled over onto the shoulder lane, turned off the vehicle, and waited for the engine to cool down. The vehicle was restarted and driven toits destination after the engine had cooled down. The approximate failure mileage was 80,000. VIN tool confirms parts not available.
Compare the 2014 BMW 428I
Other model years
Questions about the 2014 BMW 428I
Is the 2014 BMW 428I reliable?
Owners have filed 36 complaints about the 2014 BMW 428I, fewer than a typical 428I model year.
What is the 2014 BMW 428I year score?
The 2014 BMW 428I scores 75 out of 100 (average). The score compares it with the other model years of the BMW 428I: 75 is a typical year, 50 means twice the usual complaints, and serious complaints and recalls lower it.
What is the most common problem with the 2014 BMW 428I?
Engine and cooling, with 19 complaints, typically around 80,000 miles. Next is electrical (16).
How many recalls does the 2014 BMW 428I have?
6 recalls, covering air bags, electrical system and fuel system, gasoline.
What year does the BMW 428I have bad engine?
The BMW 428I model years with the most engine complaints are 2015 (37 complaints), 2016 (23 complaints) and 2014 (19 complaints).
What gas mileage does the 2014 BMW 428I get?
Official estimates for the 2014 BMW 428I range from 25 to 27 mpg combined. The most efficient version (2.0L 4-cyl, RWD) gets 22-23 city and 33-34 highway.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2014 BMW 428I?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history