Brakes failed.
1991 Chevrolet Blazer brakes complaints
Page 3 of 5: complaints 41 to 70 of 129, newest first, as owners wrote them.
When applying the brakes for extended period of time, brake pedal will go to the floor, causing vehicle to inch forward. Please provide details.
There is uneven braking, causing the brakes to lock, resulting in extended stopping distance. The manufacturer has been notified.
Antilock brakes engage at highway speeds/downhill, sometimes accompanied by hard pedal.
Abs brake failure.
Anti lock brakes fail continuously, due to failure of the bcm valve (brake pulsation modulating valve).
Anti lock brakes experienced extended stopping distances.
Brake failure.
When applying the brakes the ABS kicks in and the pedal goes to the floor and the vehicle does not stop. Dealer has not seen.
Abs brakes failed.
When applying the brakes on wet pavement left front wheel locks up, and there is a grinding in the pedal. On dry pavement when applying the brakes the vehicle shakes and pullls.
When making a emergency stop the brake pedal goes to the floor and the brakes resist. The dealer has been notified.
When applying the ABS brakes on wet or dry pavement the pedal travels to the floor, causing extended stopping distance. Please give any further details.
Brakes have always stuck or grabbed excessively.
While driving about 35mph, started to apply the brakes (ABS). They locked up. Took to dealer & had a computer check done. Main unit under hood (controlling) was bad & rear wheel sensor was bad. It's a continuous problem.
When applying the ABS brakes on wet/dry pavement, the brakes malfunctioned twice. The first time it happened when merging onto freeway, vehicle stopped in front, hit brakes, pedal traveled to the floor, there was extended stopping distance, resulting in a rear end collision. Second time, while stopping at a light traffic started moving then stopped again. Under normal conditions there would have been plenty of time to stop. However, upon applying the brakes, rear ended vehicle in front.
When applying the brakes the ABS grab in the rain, and vehicle will not stop. Has not gone to dealer.
The brakes went to the floor when applied. The driver had to reapply the brakes because the brakes did not take the first time.
Brake caliper will not tighten because of the mounting bolts,
Abs brake problems; when applying the brakes on slippery road surfaces, the truck slides additionally from 75-100 feet before stopping. There is also a shaking vibration from the truck when applying the brakes. Dealer not able to find a problem wth the system.
Intermittently on wet surfaces when the brakes are applied the pedal goes to the floor . The owner has to pump the ABS brakes to stop the vehicle. The dealer has not been notified.
Brakes: when driving put on the brakes when approaching a stop sign, has to push the brake pedal completely to the floor in order to get the vehicle to stop.
Went to stop truck and the anti-lock brake light came on, and the brake pedal went to the floor. The truck hit the back of another vehicle.
Abs brake problems; on regular road conditions, driver had to make an emergency stop. When applying the brakes, the pedal went to the floorboard and stayed at floorboard. Driver rear ended another vehicle. After impact, driver picked up brake pedal with the sole of his shoe. When truck was checked by dealer, dealer stated that something was in the way of brake pedal coming back up, and corrected the problem. *ak three people were injured.
While driving on slick wet pavement and applying brakes one wheel will lock up, causing severe stopping problems under minor braking conditions. Dealer replaced ABS brake module which did not correct problem.owner very concerned for safety.
Brakes failed.
While driving vehicle the consumer said that brakes gave out on her. Tried to step on brakes, but didn't have any. She had taken vehicle to dealer before. *ak now the ABS light illuminated and has stayed on.
Abs brake problems; while driving on regular road conditions, during normal braking, driver applied the brakes, the pedal went to the floor, and the ABS brake warning light came on and the brake system locked up. A mechanic stated that there is no ABS on vehicle at this time. The system has not been repaired. *ak ABS light has remained illuminated since occurrence took place.
When driving the truck on the highway about 50 MPH and approaching a curve, put foot on the brake pedal and the pedal went to the floor, had to coast the truck to a stop. *ak this happened a second time with the brake lights illuminating, consumer shifted to park and the brake lights remained illuminated.
When applying the brakes the pedal goes to the floor and vehicle does not stop. Dealer replaced master cylinder. *ak
VIN decoder
See the problems and recalls for an exact car
Buying a used 1991 Chevrolet Blazer?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history