Brakes failed.
1992 Chevrolet Blazer brakes complaints
Page 5 of 8: complaints 101 to 130 of 204, newest first, as owners wrote them.
When on the interstate in stop and go traffic the vehicle in front of the truck stopped, and when applied foot to the brake pedal to stop the truck, the brakes didn't not stop immediately, and the truck rearended the vehicle in front of the truck. *ak
Driving down slight incline, approaching an intersection, driver depressed brakes the truck continued to roll through the intersection." brake pressure sensor or something like that which resulted in brake failure" was diagnosed by hoffman chevrolet. Please describe details.
Ea94-038, in low speeds the ABS system activates and has a grinding noise, and extended stopping distance. Dealer replaced braking system. Dealer cannot determine problem.
When brakes were applied the vehicle did not stop. Also the ABS light was on the vehicle. The dealer has not been notified. The owner took vehicle into a private mechanic for repair.
When applying the brakes it takes longer to stop. Dealer says nothing they can do.
When applying the ABS brakes at speeds of 30-35 MPH, the pedal goes to the floor and the brakes fail to stop the vehicle. Cause unknown.
Abs brake failure.
When appluing brake pressure, vehicle severely vibrates, keeps going, eventually stops. Happens mostly during wet weather, intermittent problem. According to dealer, brakes working as designed.
Ea94-038; consumer was traveling at 15-20 MPH, was making a gradual stop, pedal went to the floo board, resulting in extended stopping distance, causing the consumer to have an accident. Consumer has contacted the dealer, dealer has replaced the rotors. Please provide further details.
When brakes are applied they intermittently resist. The dealer has been notified.
Abs brakes failed three times, once on a small patch of slippery ice.
Was involved in an accident in april of 97. When driver applied the brakes and the pedal went to the floor, driver could not stop the truck, resulting in an accident.
Ea94038, ABS braking system failure; when the traffic stopped suddendly with the streets being a little damp, driver hit brakes and the pedal went all the way to floor, causing driver to hit vehicle in front. Whenever hitting the brakes there is no good stopping action when the ground is wet. Dealer and manufacturer stated that there was not a problem with braking system.
Ea94-038; when applying force to the brake pedal on wet or dry pavement, consumer notices the pedal traveling to the floorboard, causing extended stopping distance. Consumer has contacted the dealer. Dealer states the shoes/pads and rotors need to be replaced.
Abs problems; when applying the brakes in a normal situation, on normal road conditions, the pedal went all the way to the floor, and the blazer would not stop. Driver pumped the brakes for 3-4 minutes before the system engaged. The vehicle was towed to dealership. The calipers and brake pads overheated which distorted the rotors. Calipers, pads and rotors have been replaced.
Ea94-038; consumer noticed excessive wear of the front brake shoes, pads and rotors. Consumer has contacted the dealer. Parts have been replaced. Problem still has yet to be corrected.
Consumer hears grinding ,vehcile does not stop or slow down right away, ABS does not lock up.
While driving about 40mph in heavy traffic and vehicle just stopped in front of the blazer. Applied foot to the brake pedal and the blazer just kept going and hitting the vehicle in front of the blazer. *ak
Brakes failed.
While driving the truck there are several problems on this vehicle. The ABS light comes on and there are no ABS brakes. When the ABS light comes on that means that the computer module has failed.
Abs computer module failed.
The ABS system on the truck failed to stop the truck, and the truck rolled over as a result.
Abs braking system failed 2 times, causing crashes. The car would not stop, no warning or pedal problem. In between these crashes car had extended stopping distance problems, running through lights and having near misses.
Abs brake failure, driving at speed 30mph, applied the brakes and experienced complete loss of effectiveness and extended stopping distance. Replaced drfective ABS pressure regulator valve. Ea94-038 active.
On two different occasions the emergency parking brake lever broke .
Abs brake failure, computer module failure, warning come on (yellow), no anti-locks brakes.
Abs valve control module system failed. Went to hit the brakes and there were no brakes, happened without any warning. Please describe details.
The truck has ABS; when the brakes were applied the vehicle slid through several intersections and had almost caused several accidents.
At slow speeds on slick/icy/snow-packed roads, braking seems insufficient; also slow speed emergency stopping is a serious problem, it provides a hard/spongy pedal with extremely reduced stopping ability, resulting in lock ups and loss of control. *ak consumer states in wet or dry weather when applying brakes there is a clicking noise, it has been that way since shortly after purchase, consumer states did not like it but assumed it was typical of ABS.
VIN decoder
See the problems and recalls for an exact car
Buying a used 1992 Chevrolet Blazer?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history