Concern: 1999 low mileage chevrolet lumina. Problems with the ABS and traction control systems. Corrosion or defective wheel sensors can cause total loss of braking at slow speeds. My customer explained that his ABS light was on for several months. He had driven threw his fence after turning into his driveway. He mentioned that he would lose all braking if the traction control and ABS light came on at the same time, the ABS and traction control unit was actuating. It was my understanding that if the ABS light was on in all vehicles the ABS would drop out of the braking system rendering the vehicle with conventional brakes. I guess this is not true with some late model gms. I have learned that diagnosing intermittent wheel sensors and wiring is a daunting task. The vehicle we worked on had a defective right front wheel sensor. We scoped the signal from the sensor and it showed perfect amplitude, voltage and wave form. Further testing showed it read open with an ohmmeter. Unless the circuit is completely open or shorted testing the wheel sensors and wiring with an ohmmeter or a scope is useless at times. In the past following a gm trouble code flow chart was useless, the fix was to rewire and replace the suspect parts. . I feel that gm should recall these vehicles. Or at least offer the replacement parts including a reprogrammed traction control/ABS controller at a reasonable price. Searching the archives I found one other late model gm with the same type of problems and loss of low speed braking. 1997 pontiac grand am engine: 2.4 l / 146 cid / 4 cyl / gas / dohc fuel: fuel injection ignition: distributorless trans: 4-speed automatic transaxle (electronic) mileage: 95,000 mi VIN: [xxx] time. Today customer comes in with a complaint of clicking, loss of pedal, and no stop. Customer was in today we got the ABS to actuate and he said thats what it was doing.*jb updated 07/19/2012 *js information redacted pursuant to the freedom of information act (foia), 5 u.
Chevrolet Lumina abs comes on
111 of the 2,945 owner complaints about the Chevrolet Lumina describe aBS light or ABS activating, most of them for the 1992 model year.
- owner complaints
- 111
- worst model year
- 1992
By model year
Often reported together
Brake failure 34Grinding brakes 7Spongy pedal 3Premature wear 3Jerking 2Wipers 1Sudden acceleration 1Pulling 1
What owners say
Consumer noticed that the ABS braking light appeared on the dashboard and remained on. Consumer contacted the dealer, who informed consumer that vehicle had to be placed on a diagnostic machine for inspection.
Upon depression of the brake pedal while coming to a stop, the low track and the ABS light came on . When this occurred the vehicle lost brake power. This resulted in extended stopping distance. The vehicle coasted to a stop. The consumer then put the vehicle in park and turned it off. Upon restarting the vehicle the brakes re-engaged themselves. The failure recurred within 14 miles.
While driving about 65 MPH on the highway in inclement weather driver applied brakes, the brake pedal was hard, and the ABS light appeared on the dashboard. Driver was able to control vehicle, and pulled over to the shoulders of the highway. The vehicle was towed. There was no accident.
Vehicle experienced ABS failure when the brake pedal went to the floor and vehicle the failed to stop. The dealership replaced the sensor, but problem still exists.*ak *ph
Steering wheel made clicking sound when trying to turn wheel became hard to steer as if no power steering and air bag light came on. Turned out to be the air bag coil - which had an exposed circuit. Noticed many technical service bulletins of this nature about the clicking in the steering wheel. Do not know if air bag was involved with the techinical service bulletins or other complaints. Could have been a very serious incedent if this occurred while driving the vehicle. So happens that it occurred while pulling out of a parking space at a chevrolet dealership after just having the ABS system repaired.
Brake pedal goes to floor sometimes, and ABS light on dash stays on. Mr
The ABS system had broken and had failed to stop vehicle when brake pedal was pressed. Also, when its raining and pressing on brake pedal and turning steering wheel, brakes would lock up completely. Would also make loud grinding noises. Mr
Anti lock brakes not catching when applying brakes. Then ,sometimesd it catches at the wrong time. Took vehicle to several dealerships, and each time was told that there was nothing wrong. One dealer suggested pulling fuse on ABS, but refused to do it because of liability.
When backing up and slowing down ABS starts to clatter. Its an intermittent problem. Please provide any further information.
Related recalls
Service brakes, hydraulic: foundation components: drum
- What is wrong
- Vehicle description: passenger vehicles equipped with rear drum brakes. The bolt head(s) on the rear spindle rod can separate.
- Risk
- The rear wheel can shift, causing rear steering of the vehicle. The driver could lose control and a crash could occur.
- Remedy
- Dealers will replace the rear spindle bolts.
Recall number 00V143000 · Recall details
Service brakes, hydraulic: foundation components: hoses, lines/piping, and fittings
- What is wrong
- Vehicle description: passenger vehicles. The right front brake hose is incorrectly routed behind the brake pipe bracket restricting brake hose movement that could cause the hose to either be cut by the bracket or separated at the caliper.
- Risk
- If the hose becomes disconnected or damaged, there can be a loss of pressure in one half of the brake system. The brake warning lamp may be on, the pedal will be lower than normal, and stopping distances will be longer, increasing the risk of a crash.
- Remedy
- Dealers will replace and correctly route the right front brake hose assembly.
Recall number 99V357000 · Recall details
Service brakes, hydraulic: power assist: vacuum
- What is wrong
- These vehicles were assembled with one of the four brake booster tabs not properly located in the front of dash reinforcement assembly.
- Risk
- If this condition were present in a situation where stopping distances were small, a vehicle crash could occur.
- Remedy
- Dealers will inspect for proper booster installation. Boosters found to be improperly located will be removed and reinstalled properly.
Recall number 96V122000 · Recall details
Service brakes, hydraulic: foundation components: hoses, lines/piping, and fittings
- What is wrong
- The left front brake line can contact the transaxle mounting bracket or attachment bolt.
- Risk
- This condition can cause the brake line to wear through, resulting in loss of brake fluid and eventual loss of one-half of the vehicle's brake system, increasing the potential for a vehicle accident.
- Remedy
- Dealers will inspect the vehicle for proper brake line clearance and reposition those brake lines found to have less than minimal clearance. Additionally, those brake lines found to have an indentation caused by the contact will be replaced and properly routed.
Recall number 96V069000 · Recall details
Questions about the Chevrolet Lumina abs
Why does the abs come on in the Chevrolet Lumina?
Owners who report it most often also describe brake failure, grinding or squealing brakes and soft or spongy brake pedal.
Which Chevrolet Lumina years have aBS light or ABS activating problems?
The model years with the most reports are 1992 (30 complaints), 1995 (22 complaints) and 1993 (21 complaints).
VIN decoder
See the problems and recalls for an exact car
Buying a used Chevrolet Lumina?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history