Driving vehicle & coming to a stop, the brake (ABS) pedal would continue to the floor. This problem causes the vehicle to have an extended stopping distance. Took to dealer & problem could not be located. *ak consumer states teh brakes locked, causing vehicle to slide sideways into a tree, it broke the mirror off and crushed the running board on the driver side.
1991 Chevrolet S10 brakes complaints
Page 3 of 4: complaints 41 to 70 of 72, newest first, as owners wrote them.
When the brakes are applied the pedal builds up a lot of pressure, resulting in extended stopping distance. The dealer has not been notified.
While driving at approx 10mph exited at a driveway, went to apply brakes, vehicle did not stop. Brakes made noise, pushed brakes to floor. Just redone in may 97 with pads and shoes. Weather was clear dry, has to apply brakes sooner than ususal. This defect can result in an accident. *ak dealer told consumer that this is happening because he is not used to ABS and he needs to get used to the way they work, ABS light is illuminated and will not go off, regular brakes seem to work fine, consumer has had 3 minor accidents due to the faulty ABS, only 1 of the accidents caused damage to another vehicle.
Abs brakes failed, vehicle lost control, resulting in a crash.
Experienced softness of brake pedal when depressed, taking more time to stop. Dealership unable to determine actual cause, and replaced the master cylinder and front brake pads. Three months later, when brakes applied coming down a hill steam came from the front brakes. Upon inspection, brakes had locked up. Please describe details.
Truck equipped w/ABS brakes not clear if only rear. After starting and backing up in the morning, the brake pedal is soft. On occasion truck responds slowly to pedal application. Ak first started brakes grab and lock, after brakes are used 3-4 times it work more normal but it takes longer to stop.
While making a sudden stop at a light. Consumer tried to stop the vehical by pressing the brake pedal, peadal traveled to the floorboard the vehical continued to still move, consumer pumped the brake's for vehicle to stop.
Anti lock brakes failed, resulting in an accident.
Antilock brakes failed.
When applying the ABS brakes the pedal will travel to the floor, causing extended stopping distance. Rotors and calipers were replaced.
The inside door handles are broken; also wire connection on A/C blower came loose and ABS brake failure, resulting in grinding noise when applying brakes.
Brakes failed twice, causing two accidents/injuries.
Antilock brakes failed.
Antilock brakes lock up.
When applying the brake there no brakes, ABS anti-lock brakes. Please describe .
Noise from manifold pipe heat shield.
While driving, ABS light appears continuously, due to control unit malfunctioning.
The ABS anti-lock brake light keeps coming on . Tt
The rotors are rusting every 15,000 miles. Causing terrible vibration noise. Please describe. Tt
Abs: front brakes lock up before vehicle stops causing loss of steering control; nearly caused accident while driving downhill. Tt
Failure of the ABS braking system e94-038. Tt
Abs braking system failure ea94-038. Tt
Abs brake system locked up, resulting in brake loss. Tt
Consumer driving and made a sudden stop brake slow car down and locked up there was no brake after caused an accident rear end the car before me . Tt
Abs warning light comes on continuously due to ABS module failure. Tt
Replaced ignition module.
Exhaust system rusted out.
Abs brakes fails to stop vehicle effectively, dashboard brake light comes and stays on while driving. Please describe details. Tt
Antilock brakes locked up, causing accident.
Antilock brake failure.
VIN decoder
See the problems and recalls for an exact car
Buying a used 1991 Chevrolet S10?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history