Since 15,394 miles vehicle has experience multiple system failures upon vehicle startup. 2/24, 2/25, 12/25, 1/26. In all of these 4 instances the brakes become spongy/hard, steering wheel locks, and I am not able to control vehicle. Dash lights up; "Brake system failure - 43mph top speed", "Fwd collision system unavailable", "Service traction control", "Service ESC", "Service steering column lock", "Service brake pad monitor". Dealership has replaced, Telematic control module, Electronic brake control module (EBCM), Serial data gateway module, Park assist module and most recently they replaced the battery and cleared the codes to "fix" the same intermittent but recurring condition. In 11/24 Recall N242447990 was performed, reprogramming of Brake system control module and Serial Data Gateway Module, the exact same issue happened before and after the recall.
Chevrolet Tahoe spongy pedal problems
44 of the 10,079 owner complaints about the Chevrolet Tahoe describe soft or spongy brake pedal, most of them for the 2015 model year.
- owner complaints
- 44
- worst model year
- 2015
- typical repair cost reported
- $1,400
- typical mileage
- 64,589
By model year
Often reported together
Brake failure 10ABS 2Whining noise 1Steering lock-up 1Stalling 1Slipping 1Jerking 1Headlights 1
What owners say
Vacuum pump and vacuum pump belt replacement. Experiencing increased brake pedal effort, hard brake pedal, and increased stopping distance. Confirmed by an auto shop and mechanic that this is the issue. There was special coverage given by General Motors to this vehicle to address this issue that expired in November (but I did not know that this existed). The vehicle has not yet hit 150,000 miles. Request to have my Tahoe special coverage warranty extended to address this issue.
Purchased the car new for a local dealer in Surprise, Arizona. Over time the brake pedal has become spongy, soft and pulsating. This happens mostly at slow speeds like backing out of the driveway or garage. Did a search of the federal safety agency web site and see that there was a recall on my model year vehicle to replace or reprogram the vacuum pump. However I never received a recall notice. I am now afraid to drive the car because I am concerned over a complete brake failure. I do know that during one of my normal service maintenance appointments I was approached by the service advisor about his concern over a suspected brake issue. He wanted to replace my entire brake system, master cylinder, vacuum pump, etc for a cost of about $1,500 as I recall. I declined the repair as I was not aware of that the problem I was experiencing was including in the recall. Again I never received any notice of a recall of the vacuum pump for the brakes but clearly I am experiencing the symptoms as was described in the recall notice on your website.
Hard brake pedal resulting in little or no stopping power when applying the brakes at low speed. To get the vehicle to stop, you must stomp on the pedal as hard as you can. The situation typically occurs when parking. The brake application or two are fine, but after that the brakes fail. And also make a viberation in the brake pedal while sounding rough! Was driving to work and brakes pedal went to the floor with no pressure at the pedal.
The contact owns a 2015 Chevrolet Tahoe. The contact stated that while starting and driving the vehicle, there was an abnormal whining noise detected. The vehicle was taken to the local dealer where it was diagnosed and determined that the transmission needed to be replaced. The vehicle was repaired. After retrieving the vehicle from the dealer, the contact stated she was driving, and the brake pedal was hard and failed to respond. The contact drove into the curb. The contact called and informed the dealer of the additional failure. The contact also stated that the whining noise persisted. There were no warning lights illuminated. The vehicle was towed to her residence. The vehicle was then towed to the local dealer again where it was diagnosed and determined that the vacuum pump had failed and needed to be replaced. The vehicle was repaired. The contact stated that while driving after retrieving the vehicle, the vehicle was jerking. The contact stated that the failure was related to the federal safety agency Campaign Number: 19V645000 (Service Brakes, Hydraulic). The manufacturer was not contacted. The failure mileage was approximately 70,000.
Brakes failed to work at low speed. Traveling in stop and go traffic on I-40 and the brake pedal became hard as a rock and was pulsing. Had to pull over and coast to a stop. Performed a test on the median of the highway and again the brakes failed to work. We were towed to the repair shop. Awaiting the repair diagnosis and cost.
Loss of braking effort. Also described as a hard pedal, requiring increased effort to slow the vehicle.
Brake pedal hard to push and stop vehicle when braking, could possibly be defected brake vacuum pump.
Hard brake pedal resulting in little or no stopping power when applying the brakes. Happened two days in a row. Extreme pressure needed to stop. Both times in the parking lot.
Over the last 6 months the brake pedal is hard to push after the truck sits over night. The vacuum bleeds out indicating a vacuum leak in the system. Gm and the dealer said this model and year not covered under current recall.
Related recalls
Service brakes, hydraulic: power assist: electric: control module: software
- What is wrong
- General Motors, LLC (GM) is recalling certain 2023 Chevrolet Silverado 1500, GMC Sierra 1500, 2023-2024 Chevrolet Tahoe, Suburban, GMC Yukon, Yukon XL, Cadillac Escalade, and Escalade ESV vehicles. The electronic brake control module software may fail to display a warning light when a loss of brake fluid occurs. As such, these vehicles fail to comply with the requirements of Federal Vehicle Safety Standard number 135, "Light Vehicle Brake Systems."
- Risk
- Without a warning light, the vehicle may be driven with low brake fluid, which can reduce braking performance and increase the risk of a crash.
- Remedy
- The Electronic Brake Control Module (eBCM) software will be updated through an over-the-air (OTA) update or by a dealer, free of charge. Owner notification letters were mailed October 25, 2024. Owners can contact GMC customer service at 1‑800‑462‑8782, Chevrolet customer service at 1‑800‑222‑1020, or Cadillac customer service at 1‑800‑458‑8006. GM's number for this recall is N242447990.
Recall number 24V674000 · Recall details
Service brakes, hydraulic: power assist: electric: control module: software
- What is wrong
- General Motors, LLC (GM) is recalling certain 2021 Chevrolet Tahoe and GMC Yukon vehicles. Dealer service technicians may have calibrated the brake system incorrectly, affecting Electronic Stability Control (ESC) , traction control, Anti-Lock Brake System (ABS), and braking while towing a trailer.
- Risk
- Overall braking performance may be compromised, increasing the risk of a crash.
- Remedy
- Dealers will recalibrate the brake system control module, free of charge. Owner notification letters were mailed on August 27, 2021. Owners may contact Chevrolet customer service at 1‑800‑222‑1202; GMC customer service at 1‑800‑462‑8782. GM's number for this recall is N212340970.
Recall number 21V579000 · Recall details
Service brakes, hydraulic: power assist: vacuum
- What is wrong
- General Motors LLC (GM) is recalling certain 2018 Cadillac Escalade, Chevrolet Silverado 1500 and Tahoe, GMC Sierra 1500 and Yukon vehicles equipped with either a 5.3L or 6.2L V8 engine. The output of the mechanical vacuum pump can decrease over time, decreasing the amount of vacuum/power brake assist.
- Risk
- A decrease in brake assist can increase the brake pedal effort and distance required to stop the vehicle, increasing the risk of a crash.
- Remedy
- GM will notify owners, and dealers will reprogram the Electronic Brake Control Module, free of charge. The recall began November 11, 2020. Owners may contact GM customer service at 1‑866‑522‑9559, Cadillac customer service at 1‑800‑458‑8006 or Chevrolet customer service at 1‑800‑630‑2438. GM's number for this recall is N202300860.
Recall number 20V603000 · Recall details
Service brakes, hydraulic: power assist: vacuum
- What is wrong
- General Motors LLC (GM) is recalling certain 2015-2017 Cadillac Escalade, 2014-2018 Chevrolet Silverado, GMC Sierra, 2015-2018 Chevrolet Suburban, Tahoe, GMC Yukon vehicles. The amount of vacuum created by the vacuum pump may decrease over time.
- Risk
- As the vacuum level drops, the brake assist decreases, increasing braking effort, extending the distance required to stop the vehicle, thereby increasing the risk of a crash.
- Remedy
- GM will notify owners, and dealers will reprogram the Electronic Brake Control Module, free of charge. The recall began October 8, 2019. Owners may contact Chevrolet customer service at 1‑800‑630‑2438, Cadillac customer service at 1‑800‑458‑8006 or GMC customer service at 1‑800‑462‑8782. GM's number for this recall is N192268490.
Recall number 19V645000 · Recall details
Service brakes, hydraulic
- What is wrong
- General Motors is recalling certain model year 2014 Chevrolet Suburban vehicles manufactured July 9, 2013, through July 22, 2013; and 2014 Chevrolet Tahoe vehicles manufactured July 16, 2013, through July 23, 2013; and model year 2014 GMC Yukon vehicles manufactured July 13, 2013, through July 18, 2013; and model year 2014 GMC Yukon XL vehicles manufactured on July 22, 2013. The rear brake caliper bolts may not be fully tightened. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 135, "Light Vehicle Brake Systems."
- Risk
- Loose caliper bolts may cause reduced braking performance and result in lengthened stopping distances, increasing the risk of a crash.
- Remedy
- GM will notify owners, and dealers will inspect the bolts on both rear brake caliper brackets. Any bolts found loose will be replaced and tightened. This service will be performed, at no charge. Owners may contact Chevrolet at 1‑800‑222‑1020 and GMC at 1‑800‑462‑8782. GM's recall number is 13247.
Recall number 13V342000 · Recall details
Service brakes, hydraulic: antilock/traction control/electronic limited slip
- What is wrong
- Certain pickup trucks and sport utility vehicles may experience unwanted antilock brake system (ABS) activation. This condition is more likely to occur in environmentally corrosive areas. This recall will be launched in the "salt belt" states of connecticut, delaware, illinois, indiana, iowa, maryland, massachusetts, maine, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin and the district of columbia only.
- Risk
- This can cause increased stopping distances during low-speed brake applications, which could result in a crash.
- Remedy
- Dealers are to remove the wheel speed sensor and thoroughly clean the wheel speed sensor mounting surface on the bearing, apply rust inhibitor to the cleaned surface, grease the mounting surface, reinstall the wheel speed sensor, and check the peak-to-peak output voltage to ensure the wheel speed signal is within specifications. The recall began september 22, 2005. Owners may contact chevrolet at 1‑800‑630‑2438 or gmc at 1‑866‑996‑9463.
Recall number 05V379000 · Recall details
Service brakes, hydraulic: pedals and linkages
- What is wrong
- On certain sport utility vehicles, the brake pedal pushrod retainer may be missing. If the retainer is missing, the brake booster pushrod could disengage from the brake pedal.
- Risk
- This could result in a loss of brakes which could result in a crash.
- Remedy
- Dealers will inspect the vehicles for the brake pedal pushrod retainer and install one if it is missing free of charge. The manufacturer began contacting owners by telephone on march 10, 2005. Owners may contact chevrolet at 1‑800‑630‑2438 or gmc at 1‑866‑996‑9463.
Recall number 05V103000 · Recall details
Service brakes, hydraulic
- What is wrong
- Certain sport utility vehicles, pickup trucks, and passenger vans fail to comply with the requirements of federal motor vehicle safety standard no. 135, ?passenger car brake systems.? Some of these vehicles were produced with an out-of-specification brake hydro-boost housing relief valve bore.
- Risk
- Consequently, the valve o-ring seal may fracture. Steering efforts may be slightly increased while braking or parking. Under certain driving conditions, a fractured seal may require a slight increase in the applied brake pedal effort to achieve the same vehicle deceleration rate as prior to the seat fracture.
- Remedy
- Dealers are to replace the hydro-boost relief valve. The recall began on june 18, 2004. Owners should contact cadillac at 1‑866‑982‑2339; chevrolet at 1‑800‑630‑2438; gmc at 1‑866‑996‑9463; or hummer at 1‑866‑486‑6376.
Recall number 04V045000 · Recall details
Service brakes, hydraulic: foundation components: hoses, lines/piping, and fittings
- What is wrong
- Vehicle description: light duty pickup trucks and sport utility vehicles. Some of these vehicles have a clearance condition between the front right-hand brake pipe and the body cross sill that could decrease to the point of allowing contact during the life of the vehicle. If contact occurs and the brake pipe becomes damaged, in half of the brake system there can be a loss of brake fluid and pressure. The brake warning lamp will be activated when the brake fluid level reaches the indicator limit.
- Risk
- During braking, the pedal will be lower than normal and stopping distances will be longer. If this occurs when stopping distance is limited, a crash could occur.
- Remedy
- Dealers will inspect the front right-hand brake pipe for wear. If there are signs of wear, this section of the brake pipe will be replaced with a new designed brake pipe section. If there are not signs of wear on the brake pipe, the dealer will install a spacer clip to ensure sufficient clearance between the brake pipe and the body cross sill.
Recall number 00V345000 · Recall details
Service brakes, hydraulic: foundation components: disc: rotor
- What is wrong
- Vehicle description: light duty pickup trucks and multi-purpose passenger vehicles. One or both front brake rotor/hubs were built with an out-of-specification gray iron that can fail during the life of the vehicle.
- Risk
- If a driver continues to drive with a cracked rotor, the cracks could continue around the wheel mounting bolt circle and ultimately result in a wheel separation.
- Remedy
- Dealers will inspect the rotors for a core date of "287" and, if found, replace the rotor.
Recall number 98V033000 · Recall details
Questions about the Chevrolet Tahoe spongy pedal
Which Chevrolet Tahoe years have soft or spongy brake pedal problems?
The model years with the most reports are 2015 (13 complaints), 2016 (6 complaints) and 1998 (4 complaints).
How much does it cost to fix soft or spongy brake pedal on the Chevrolet Tahoe?
Owners who mentioned a price put the repair at about $1,400 (median of 6 complaints that include a dollar amount). Costs vary with mileage, warranty and where the work is done.
VIN decoder
See the problems and recalls for an exact car
Buying a used Chevrolet Tahoe?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history