2013 Chrysler 200 suspension problems

Filed Feb 4, 2022 · Brakes, Suspension · FL

CV axle are wore out I couldn't drive turning an shocks wore out faster Please help

Filed Jun 4, 2020 · Suspension · 19,000 miles · WI

Tl* the contact owns a 2013 chrysler 200. The contact stated that while driving at various speeds, the vehicle drifted to the right. The vehicle was taken to ganrud chrysler located at 2300 auto park way, green bay, wi 54302, where the mechanic replaced the rear control arms however, the failure recurred. The contact was informed by the service center that the rear wheels were not adjustable and could not be re-aligned. The manufacturer was notified of the failure. The failure mileage was 19,000.*dt

Filed Apr 14, 2020 · Airbags, Brakes · MI

I got a 2013 chrysler 200 from mega auto outlet in stafford,va.3-30-20 and tried to take it back to mega auto outlet. I called the dealership the next day about why there wasn't a inspection sticker on the windshield and why was there some much noise from the rear. The salesman then told me that there was a inspection sticker on the windshield and told him there wasn't and I was going to bring the car back because it was illegal to sell a car without a inspection sticker. But he refused to take the car back and said to me if I was to bring the car back that the police would there and not to bring car back. I took to local garage to find out what was wrong with the car because it was making noises in the rear of car and the airbag light was on. I found tout that there was all kinds of problems with the 2013 chrysler 200 and it was unsafe to drive. I don't know what else to do?

Filed Mar 15, 2020 · Suspension, Transmission · 140,567 miles · PA

Throttle body goes bad every 3 months and goes into limp mode.

Filed Jun 15, 2019 · Brakes, Suspension · 52,000 miles · FL

I purchase my chrysler 200 around 1/8/2019 today is 6/15/2019 and I am getting this clicking noise around the front end rather you turning or driving and its pulling to the right. I have taking my chrysler 200 to atleasted (6) repair shops they all gave me different answers about what it going take to fix the problem.I am so confused and disappointed & feeling some kinda way about this chrysler 200 right now. So dick norris buick gmc in palm harbor, fl. ( I would never deal with them again) and to the (chrysler corporation) get it right the first time this is america and I an a veteran.

Filed May 21, 2019 · Acceleration, Driver assistance · CA

The RPM suddenly stops and it's takes few seconds to go down and speed suddenly increase

Filed Mar 5, 2018 · Steering, Suspension · 550 miles · FL

My transmission has had nothing but problems shifting,racing rpms,banging and clunky plus the gears are searching. The software has been updated along with its recalls. Because there is no code when present or engine light. Chrysler will not call it not working. But they state its working fine because no codes or engine light. The dealer gave me a harx time with it as a trade in. The brakes have been an issue and they hear the noise byt state they are fine when in fact they dont always stop when pressing down. My front end and steering has been taken apart and replaced so many times . The front end scapes clunks still. I explained to both chrysler corp and arrigo dodge chrysler in west palm beach. Im still having problems. The car feels like I lose control of the car. I have a bad car service records state all the repairs. And the dealer is no help when the car was bumber to bumber coverage . All they did was year down take apart which they have done shotty work. And ripped off me . I have no recourse than to be stuck with this so called dream car of mine. $30,000 investment down the tubes.

Filed Sep 10, 2015 · Suspension · 9,000 miles · FL

Tl* the contact owns a 2013 chrysler 200. The contact stated that while driving at 40 MPH, an abnormal noise emitted from the front of the vehicle as it started to vibrate violently. The vehicle was taken to the dealer. The technician diagnosed that the inner tie rod needed to be replaced and a wheel alignment needed to be performed. The manufacturer was made aware of the failure. The vehicle was repaired. The failure mileage was 9,000. Ma 10/25/15

Filed Apr 20, 2015 · Lights, Suspension · 50 miles · MI

Tl* the contact owns a 2013 chrysler 200. While driving at an unknown speed, the headlights and high beam lights failed. The vehicle was taken to the dealer, where the technician diagnosed the bulbs had blown. The vehicle was repaired. Also, when driving over a bump at various speeds, the rear of the vehicle shifted to the right. The vehicle was taken to a dealer. The technician was unable to find a failure. The manufacturer was not made aware of the failure. The failure mileage was 50. The VIN was not available.

Filed Apr 1, 2015 · Brakes, Steering · 6,600 miles · AZ

From almost the beginning of owning this car it has made a noise in the left front driver's side. The steering wheel feels lose, like it could come apart. I had brake issues also. The dealer was able to find the brake noise, but not the noise in the left front driver's side. They say there is nothing they can detect. Yet, my car continues to make this noise. Now, I'm not a mechanic, but my car should not be making a noise if everything is alright. Checked on youtube and many people with chrysler 200's, 2013's are having the same problem. They say their mechanics either cannot find the problem, or it's 1. Steering column 2. Outer tie rod end or sway bar end links 3. Ball joints 4. Bushings can be worn on control arms of sway bar or 4. Tie rod. My dealer cannot find any of that wrong with my car, yet, I believe it is one of these problems. My car was purchased at moore, chrysler, jeep, subaru, at 8700 w. Bell, road in glendale, arizona. I am a single lady, living on social security disability. My dad bought this car for me. I cannot afford to have all these problems fixed if the warranty runs out, and the dealer lets it. I need them to take responsibility and fix my car.