My son was driving his car which is a 2013 Chrysler 200 when the engine suddenly began to knock loudly and then the car shut off in traffic. There were no breaks or steering which nearly resulted in my son having an accident. He was able to get the car pulled to the side. Then we had the car towed to the shop. The mechanics said the dipstick showed no and that the knock was the result of an engine failure due to no oil in the oil pan. There was excessive debris in the small amount of oil that remained in the oil pan. The mechanic said that the debris came from bearings that have worn away. The engine is not repairable. It was noted that there was a recall on 2013 Chrysler 200 vehicles for this very same problem. However the recall for some reason excluded this specific car. Apparently the recall did not go far enough to cover all the cars affected.
Chrysler 200 knocking problems
31 of the 4,191 owner complaints about the Chrysler 200 describe engine knocking or ticking, most of them for the 2012 model year.
- owner complaints
- 31
- worst model year
- 2012
- typical mileage
- 58,600
By model year
Often reported together
Stalling 7Jerking 4Hesitation 4Steering noise 3Harsh shifting 3Grinding brakes 3Won't start 2Slipping 2
What owners say
My car engine is knocking loud when I drive, do I need a new engine..?
This is my second compliant, though I should've been complaining since buying this vehicle in june 2016. My car wouldn't start and the engine would stall, no battery issue. All of a sudden a month later it started. I took it to my mechanic he said the engine light said a catalytic converter...but the catalytic converter does not need replaced. I have have my serpentine belt replaced 7 times in the last 3 years. I can hear my engine shifting roughly. In the month I bought the vehicle, I took it to the dealership to see what was wrong and why my RPM was going up when parked and the engine would stall. They told me if I didn't use the different fuel (which I only did twice) that it would stop. I was stuck with the car, and still am. My 'gas cap' light has been going on and off for years. I had my fuel system checked and a valve was replaced, sensors have been replaced. My engine now sounds worse than ever with knocking, whirring and shakes almost always. I'm told there is an electrical issue and/or the engine tensioner but no one can truly pinpoint the issue....it's extremely frustrating. Please recall this lemon. I have told everyone possible to never buy this brand of vehicle. This purchase was the worst mistake of my life.
The blend door actuator making noises. Knocking sound. Also the sound is making a squeaky door sound. This sound is above the glove compartment. Passengers are very startled when it makes a noise when car is running or not.
I just had my car pre purchase inspected and it was reported to be in great condition. Then all of the sudden my engine has stalled twice in the last 72hours, when coming to a stop. I am able to turn it back on, however fear for my safety now whenever I drive it. These exact issues have been reported with other 2012 chrysler 200 models, due to connecting rod bearing failure and I believe this model has been similarly effected. I feel like I should be entitled to a engine recall as well, due to the identical issues that I am experiencing.
Dash airbag light stays on and the front axle is grinding and when turning the steering wheel right or left is a knocking sound from the tire.
Tl* the contact owns a 2012 chrysler 200. While driving 35 MPH the steering wheel ceased and the vehicle stalled. The contact was able to restart the vehicle after five minutes. While driving and making a left turn the vehicle stalled again. While attempting to start vehicle there was abnormal ticking noise detected. The ABS and traction control warning lights were illuminated. Additionally, the speedometer was inoperable. The local dealer was not contacted. The manufacturer was contacted but no further assistance was provided. The failure mileage was 114,000.
The car has a ticking by the right side I reported this to meinke and they let the warranty expire with silvercrest but its noted in my 30 day warranty with drive time.
Our car started over heating & smoke started coming out, the car was beeping & the gauge for the heat was sky rocketing to the h. White smoke started coming out of the left side of the engine & then the car was making a knocking sound. At the stoplight waiting to turn our car ended up shutting off & not starting.
Tl* the contact owns a 2017 chrysler 200. While driving 25 MPH, the vehicle stalled. While driving 60 MPH, the transmission slipped and caused the vehicle to feel as if it switched gears unintentionally. Also, an abnormal knocking noise was detected. Furthermore, oil had to be added to the vehicle every three hundred miles. The vehicle was taken to butler chrysler dodge jeep (1555 salem rd, beaufort, sc 29902, (843) 474-0557) where it was diagnosed that the vehicle was operating normally. The manufacturer was not contacted. The failure mileage was 49,008.
Related recalls
Engine
- What is wrong
- Chrysler Group LLC (Chrysler) is recalling certain model year 2013 Dodge Avenger and Chrysler 200, and model year 2014 Jeep Compass and Patriot vehicles equipped with 2.4L engines. Due to abrasive debris in the balance shaft bearings, these engines may have a loss of engine oil pressure, possibly resulting in an engine stall or engine failure.
- Risk
- If the engine stalls while driving it may increase the risk of a crash.
- Remedy
- Chrysler will notify owners, and dealers will replace the engine balance shaft module, free of charge. The recall began on December 24, 2013. Owners may contact Chrysler at 1‑800‑247‑9753. Chrysler's recall campaign number is N52.
Recall number 13V552000 · Recall details
Engine and engine cooling
- What is wrong
- Chrysler is recalling certain model year 2012 chrysler vehicles, including 200 and town and country models, dodge vehicles, including charger, durango, grand caravan and journey models and jeep grand cherokee vehicles manufactured from august 31, 2011, through september 13, 2011, that are equipped with 3.6l engines. These engines may experience connecting rod bearing failure due to debris inside the engine block.
- Risk
- Connecting rod failure may lead to engine seizure which may increase the risk of a crash.
- Remedy
- Chrysler will notify owners and replace the engine free of charge. The safety recall is expected to begin on or about november 18, 2011. Owners may contact chrysler at 1‑800‑853‑1403.
Recall number 11V487000 · Recall details
Questions about the Chrysler 200 knocking
Which Chrysler 200 years have engine knocking or ticking problems?
The model years with the most reports are 2012 (11 complaints), 2013 (7 complaints) and 2011 (4 complaints).
VIN decoder
See the problems and recalls for an exact car
Buying a used Chrysler 200?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history