2019 Chrysler Pacifica steering problems

Filed Nov 3, 2026 · Steering · HI

When driving on the road and slight turning of the steering wheel from 11-1 o' clock position, the steering locks or gets stuck and I have to apply extra force to turn the steering wheel to get it to turn OK.

Filed Oct 26, 2026 · Steering · UT

I am experiencing an issue with the steering in my vehicle, in which the steering wheel shutters and rattles/shakes when making turns. This happens mostly when turning left at slow speeds, but also sometimes when turning right. The shuttering and shaking typically happens around the 11 and 1 o'clock position. This issue is very worrisome, as I am afraid that the power steering will completely fail one day, leading to a crash. I am also having an issue in which the start/stop system shuts down in the middle of driving the vehicle around town. More than half of the time that I drive it, the start/stop system stops working, and a warning light appears. I have had a few times in which the engine will turn off completely at a stop light, which is very worrisome. The dealer has diagnosed the steering issue as needing a new steering rack, at the cost of $5000. Reading online, I am finding MANY other Pacifica owners who have these exact same issues. I believe that they are caused by manufacture defect, and a recall needs to be issued. I believe the problems with my vehicle are related to the federal safety agency CAMPAIGN NUMBER: PE25009.

Filed Oct 3, 2026 · Electrical, Steering · GA

Steering wheel sticks when slightly turning either direction and when you apply force to unstick over corrects making it very dangerous and a safety issue especially on highways. Researching shows this is pretty common in this year and model

Filed Sep 6, 2026 · Steering · VA

When in gentle right turns, the steering "sticks" at about 1:00 and I have to apply force to remove the steering wheel from that position. It results in oversteering, particularly at higher speeds.

Filed Sep 3, 2026 · Steering · TN

The van has a consistent steering catch when traveling most pronounced at 11 and 1. The steering hangs and then releases which causes the van to travel unexpectedly into the other lane of traffic. There are no faults or other indicators visible with the vehicle to warn the driver of an issue. The issue is more noticeable when the outside air temperature is above 85 deg F and the van has been drive 15 or so miles. Additionally, a visual inspection of all mechanical components of the van related to steering does not show any abnormal wear and tear. The van has 126K miles on it.

Filed Sep 2, 2026 · Steering · PA

The steering sticks normally when slightly turned especially going highway speeds around bends. You have to “yank” the wheel from it being stuck and risk over steering off the road or into other lane. Huge safety risk.

Filed Aug 24, 2026 · Steering · NC

Power steering sticks at highway speed around curves. This problem is worsening and is dangerous. The car has been inspected with repair estimates around $5,000.

Filed Aug 17, 2026 · Steering · NC

I am experiencing an intermittent steering problem with my 2019 Chrysler Pacifica Limited. While driving, particularly when making slight turns or small steering corrections, the steering wheel sometimes feels as though it sticks or binds in the turned position instead of smoothly returning toward center. When this occurs, I have to apply additional force to the steering wheel to correct the vehicle’s direction. Once enough force is applied, the steering releases and moves, which can cause the vehicle to correct more abruptly than intended. This occurs at both lower and higher driving speeds and is especially noticeable during gradual turns and small steering corrections near the center position. The problem creates a safety concern because the vehicle can continue traveling in the direction of the slight turn until I deliberately apply additional steering force. This makes maintaining the intended direction of travel less predictable. There are currently no power-steering or other steering-related warning lights displayed on the dashboard. When the vehicle is stationary with the engine running, the steering wheel turns smoothly and I have not been able to reproduce the sticking sensation. The problem occurs while the vehicle is being driven. I took the vehicle to an authorized Chrysler dealership and reported the steering concern. The dealership test-drove the vehicle but stated that they could not reproduce the problem and considered the steering behavior normal. However, the problem continues to occur during normal driving. I have also been able to record video demonstrating the steering behavior. The vehicle remains available for further inspection. The exact component causing the problem is UNKNOWN. I am reporting the issue because the intermittent resistance in the steering and the additional force required to correct the vehicle’s direction could create a loss-of-control risk if the condition worsens or occurs unexpectedly during a turn.

Filed Jul 9, 2026 · Steering · MI

The steering "sticks" on either right or left hand curves (more left than right) under normal driving circumstances on paved roads. This causes a "jerk" when returning the wheel to center, after or as the vehicle is coming out of the curve. Definitely concerning. Noticed shortly after we purchased the van with 100,000 miles on the odometer.

Filed Jun 21, 2026 · Steering, Transmission · AR

Powertrain: harsh, jerky shifting, violent, lurching gear changes, pause before engaging and high revving and lack of acceleration, mostly noticed at 50-60mph Steering PE25009 - catching or sticking when making minor or gradual turns in either direction when the steering wheel is positioned near the 11 o'clock or 1 o'clock positions. It requires extra force to break free and jerks the steering