1997 Dodge Durango problems

What is wrong

Vehicle description: pickup trucks. Sound deadener material inside the steering wheel could become detached from the cover and housing. Note: the ram pickup trucks were built at the warren assembly plant ("s" in the 11th VIN position) from may 16, 2000 through october 23, 2000; st. Louis north assembly plant ("j" in the 11th VIN position) from may 19, 2000 through october 23, 2000; lago alberto assembly plant ("m" in the 11th VIN position) from may 23, 2000 through october 23, 2000; and saltillo assembly plant ("g" in the 11th VIN position) from may 23, 2000 through october 23, 2000. Important: vehicles that have already had the proper clockspring installed, according to warranty records, have been excluded from this recall. In addition, 1997-2000 model year vehicles that have had a suspect replacement clockspring installed, according to warranty records, have been added to this recall.

Risk

When this occurs, the material could interfere with the clockspring ribbon and cause an open circuit. The driver air bag system will become disabled, and the air bag warning lamp will illuminate on the instrument panel.

Remedy

Dealers will replace the clockspring assembly. Owner notification began june 18, 2001. Also some 1997-200 model year vehicles that, according to warranty records, have had a suspect replacement clockspring installed, will also be included in this campaign. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact daimlerchrysler at 1‑800‑853‑1403.

Recall number 01V153000 · Recall details

Daimlerchrysler corporation (dcc) is recalling the target population of approximately 600,000 my 2000 through 2003 durango and dakota vehicles with four-wheel drive to replace the front suspension upper ball joints with redesigned parts that do not have the joint integrity concerns and have substantially improved joint retention capacity (the federal safety agency recall no. 04v‑596).though dcc does not admit to a safety-defect in the subject components, odi believes that the facts in this investigation show otherwise.because of the low rates of separation incidents in the remaining subject vehicles, a safety-related defect has not been identified in those populations and further use of agency resources does not appear to be warranted.the closing of this investigation does not constitute a finding by the federal safety agency that no safety-related defect exists in those vehicles.the agency reserves the right to take further action if warranted by the circumstances.for additional information, see the attached closing report.

EA03023

There are no injuries or fatalities associated with this alleged defect.while conducting this investigation, odi found that the subject cinches meet the load bearing requirements of federal motor vehicle safety standard 208, and that many of the reported failures were due to incorrect child safety seat installations. Additionally, the report rate is low (1.60/100k).the information available fails to establish the existence of a defect trend at this time.further allocation of agency resources to this issue is unwarranted and the preliminary evaluation is being closed.

PE02082