I am writing to formally escalate an ongoing and serious safety issue involving my 2019 Dodge Durango R/T, VIN [XXX], which was originally transported from Canada and is now registered in New York, United States. I have experienced repeated incidents involving sudden loss of engine power, multiple dashboard warning lights, and extensive ABS-related fault codes. Despite multiple visits to my local dealership and substantial diagnostic expenses, the underlying issue remains unresolved. My vehicle is now immobilized at my home, and I am being asked to incur additional expenses for further diagnosis and repairs without a clear explanation of the underlying failure or whether it may be related to an outstanding ABS recall. I am requesting a formal safety investigation, a review of my vehicle’s recall eligibility, and a resolution that does not leave me financially responsible for repeatedly diagnosing what may be a known safety-related defect. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Dodge Durango abs comes on
232 of the 13,793 owner complaints about the Dodge Durango describe aBS light or ABS activating, most of them for the 1999 model year.
- owner complaints
- 232
- worst model year
- 1999
- typical repair cost reported
- $1,025
- typical mileage
- 67,000
By model year
Often reported together
Check engine light 30Ball joint 23Brake failure 22Stalling 13Loss of power 10Engine failure 7Grinding brakes 7No deployment 7
Trouble codes mentioned
U0415 1U0401 1P0340 1P0304 1P0300 1P0113 1B195F 1B15A1 1
What owners say
my vehicle has had a recall since November 2024 For the HCU/ABS module that falsely reads pressure in the primary circuit may illuminate the brake lights (up to 4.5 mph), disable the ABS and Electronic Stability Control (ESC), and allow the vehicle to start and shift out of park without the brake pedal being depressed. Well back in November 2025 i had to pay for towing twice and have it in service because the ABS Stop and Start module went out and i had to repalce the battery out of pocket and then not even 7 months to the date i went out and tried to get in my durango and it wouldnt start so i replace the battery and the ABS light came back on and the vehcle shut down and i couldnt get it started back.
While driving the ABS light came on causing the abs lock to turn off increasing instability to cars performance.
The contact stated that the vehicle was taken to the dealer for a recall repair for the federal safety agency Campaign Number 24V838000 (Service Brakes, Hydraulic); according to the contact, the vehicle was partially repaired but was being charged for the hydraulic control unit which the contact believes is part of the recall repair; however the dealer stated it was separate from the recall but needed to be replaced due to a failure. The contact stated that according to the dealer the malfunctioning piece for the ABS and ESC were replaced. The contact believes that the parts were only cleaned out and not replaced. The manufacturer was notified of the issue. The approximate failure mileage was 95,000.
I had a safety recall for the ABS brake module which was taken in. I was told twice one time the part they did not know when it would arrive. I kept calling. It was very hard to get a hold of the dealership Chrysler Dodge ram country and Fort Stockton, Texas. Called again last Friday conveniently. The part had been incorrectly ordered and that day it was available. They were going to have a tech repair it that day. I told them to give me a call because I would be working out of town. They did not call but they took my vehicle to my employer and left it there and left the keys with the coworker. Call them back on Monday because now I had the auto start light on and still the traction light on. Explain to them that if it could have been part of the ABS module they had supposedly replaced. They tried to convince me that it did not. So needless to say I had to replace a vacuum pump which is in the process but as the gentleman that was going to repair that took a look at the ABS module which was old. No signs of anything being new or even any of the components being removed. No signs of it being touched. I googled the part number on the abs module which came up as a recall item. So the original part was still in my vehicle which was the original part that had a recall. The item was never replaced as they had told me which could have led to a major hazard or possibly even death of myself, family, or even another vehicle causing an accident. They took it upon themselves to put myself in danger and anybody else on the roads along with anybody. I might have been carrying in my vehicle by lying that they had replaced that part. I have pictures of the part with the part number that matched the recall part number
I was coming out of a drive thru car wash and driving towards an intersection with Rail road tracks on the road getting ready to turn left going 15 to 20 mph. As I turned my vehicle began skidding causing me to loose control and hitting 2 vehicles head on . I believe if my traction control (stability control) system or abs were functioning correctly this could have been avoided.
I'm having issues with my 2021 Dodge Durango I have a recall on a rear view camera a recall on a rear spoiler a recall on the steering assembly a recall on the ESC light mail function ABS system loose airbags
Around 50,000 or trailer brake service and traction control warning came on. Took into dealership was told it was hydraulic control unit and abs module that need replaced
After purchasing a used 2023 Dodge Durango GT, issues arose almost immediately following delivery. I took the vehicle to a Chrysler/Dodge/Jeep/Ram (CJDR) dealership for inspection and service. Diagnostic scans revealed multiple stored and active fault codes, including but not limited to: U0415 / U0401 – Implausible or invalid data received from ABS / ECM / PCM B195F-12 – Power liftgate chime control circuit short to battery B15A1-00 – Active electrical fault Multiple body control, module communication, and liftgate-related fault codes The vehicle experienced intermittent starting failures, creating safety concerns including: Potential inability to move the vehicle when needed, including in traffic Risk of being stranded in unsafe locations Uncertainty regarding whether the vehicle would reliably restart after being shut off The vehicle was removed from service and sent to an authorized Dodge dealership for further diagnosis and repair. The manufacturer/dealer elected to replace a fuel line as part of the repair process to address the starting hesitation. The vehicle has been inspected by an authorized Dodge service department. No police or insurance inspections have occurred. Symptoms occurred intermittently and without consistent warning lights, including: Delayed or hesitant engine starting Requirement to press the brake pedal firmly in order to start the vehicle Intermittent electrical system fault codes retrieved during diagnostics Symptoms first appeared almost immediately after vehicle delivery. The vehicle has a documented history of multiple electrical communication faults, including body control and power liftgate chime control circuits. The selling dealer (Westside Hyundai) was unable to retrieve these fault codes, resulting in the vehicle being out of service and pairs being coordinated at their expense. Thank you for your attention to this matter.
FORMAL COMPLAINT Safety Recall 94B (the federal safety agency Campaign No. 24V‑838) I hereby submit this complaint regarding the failure to properly complete Safety Recall 94B (the federal safety agency Campaign No. 24V‑838) involving the HCU/ABS module on my 2018 Dodge Durango. On December 23, 2025, I contacted an authorized Dodge dealer located at 5404 S. Illinois Route 31, Crystal Lake, IL 60012, to remedy the HCU/ABS defect under the recall. I was informed that the recall repair would be performed free of charge and an appointment was scheduled for December 29, 2025. At the scheduled visit, the vehicle was returned to me in less than 30 minutes without any recall repair being performed. Instead, I was told that paid diagnostics were required and that the estimated repair cost could range from $3,000 to $5,000. I was also informed that the recall repair could not be completed because the HCU/ABS module was not in stock. The dealer later stated that the module would be ordered, but the delivery timeline was repeatedly postponed. On January 27, 2026, the vehicle was returned to me with the same HCU/ABS-related malfunctions. The dealer stated that Recall 24V‑838 / FCA 94B had been closed and refused to replace the HCU/ABS module under the recall. Although FCA systems reflect the recall as “completed,” the safety defect has not been remedied. The vehicle continues to display ABS/ESC warnings, and diagnostic trouble codes related to the braking and electronic stability control systems remain present, confirming that the defect described in the recall persists. Pursuant to 49 U.S.C. § 30118(b) and 49 CFR § 573.6(c)(10), when a safety defect persists or reoccurs after recall repairs, the manufacturer is required to implement additional corrective measures, including repeat repair or replacement of the affected component or system. Closing a recall while the defect remains unresolved does not satisfy federal requirements. I respectfully request regulatory review and appropriate action to ensure that thi
Related recalls
Service brakes, hydraulic: antilock/traction control/electronic limited slip: control unit/module
- What is wrong
- Chrysler (FCA US, LLC) is recalling certain 2018-2019 Jeep Grand Cherokee and Dodge Durango vehicles. A malfunction in the antilock-brake system (ABS) module may incorrectly illuminate the brake lights and disable the ABS and electronic stability control (ESC). In addition, the vehicle operator may be able to start and shift out of Park without the brake pedal being applied.
- Risk
- A vehicle that can be started and shifted out of Park without applying the brake pedal can result in a vehicle rollaway. Disabled ABS and ESC systems can reduce vehicle handling and control in certain driving situations. Brake lights that incorrectly illuminate can fail to properly indicate the driver's intention to following traffic. Any of these scenarios can increase the risk of a crash.
- Remedy
- Dealers will replace the integrated pressure transducer and update the ABS module software, as necessary free of charge. Owner notification letters were mailed December 16, 2025. Owners may contact FCA customer service at 1‑800‑853‑1403. FCA's number for this recall is 94B. This recall replaces previous recall number 22V‑426. Vehicles previously remedied under 22V‑426 will need to have the new remedy completed.
Recall number 24V838000 · Recall details
Service brakes, air: antilock: control unit/module
- What is wrong
- Chrysler (FCA US, LLC) is recalling certain 2022 Dodge Durango and Ram 2500 and 3500 vehicles. Due to a software malfunction, the ABS control module may disable the electronic stability control system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 126, "Electronic Stability Control Systems."
- Risk
- Driving with a disabled electronic stability control system can increase the risk of a crash.
- Remedy
- Dealers will update the ABS control module software, free of charge. Owner notification letters were mailed beginning July 11, 2024. Owners may contact FCA US, LLC customer service at 1‑800‑853‑1403. FCA US, LLC's number for this recall is 55B.
Recall number 24V415000 · Recall details
Service brakes, hydraulic: antilock/traction control/electronic limited slip: control unit/module
- What is wrong
- Chrysler (FCA US, LLC) is recalling certain 2018-2019 Jeep Grand Cherokee and Dodge Durango vehicles. A malfunction in the antilock-brake system (ABS) module may illuminate the brake lights, and allow the vehicle to start and shift out of Park without the brake pedal being applied.
- Risk
- A vehicle that starts and shifts out of Park without applying the brake pedal can result in vehicle rollaway, increasing the risk of a crash without prior warning and/or injury to others outside of the vehicle.
- Remedy
- This recall is replaced by the federal safety agency recall number 24V838. Vehicles already repaired under this recall will need to have the new remedy completed. The remedy includes updated HCU/ABS module software that prevents the HCU/ABS module from falsely reading pressure in the primary circuit. FCA has decided to do a two-Phase Campaign remedy schedule. Phase 1 began November 17, 2022. Phase 2 begin date has not been determined yet. Interim owner notification letters explaining the safety risk were mailed July 28, 2020. Owner notification letters were mailed on November 29, 2022. Owners may contact FCA US, LLC customer service at 1‑800‑853‑1403. FCA US, LLC's number for this recall is Z48.
Recall number 22V426000 · Recall details
Service brakes, hydraulic: antilock/traction control/electronic limited slip: control unit/module
- What is wrong
- Chrysler (FCA US, LLC) is recalling certain 2019-2022 Ram 2500 and 2021-2022 Dodge Durango vehicles, and 2019-2022 3500 cab chassis with GVWR less than 10,000 lbs. The ABS control module software may prevent the electronic stability control (ESC) malfunction indicator light from illuminating during certain conditions. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 126, "Electronic Stability Control Systems."
- Risk
- An ESC malfunction indicator light that fails to illuminate during an electronic stability control problem can increase the risk of a crash.
- Remedy
- Dealers will update the ABS control module software, free of charge. Owner notification letters were mailed March 29, 2022. Owners may contact FCA US, LLC customer service at 1‑800‑853‑1403. FCA US, LLC's number for this recall is Z20.
Recall number 22V140000 · Recall details
Service brakes
- What is wrong
- Chrysler (FCA US LLC) is recalling certain 2011-2014 Dodge Durango and Jeep Grand Cherokee vehicles. The affected vehicles had brake booster shields installed under a previous campaign to prevent water from entering the brake booster and limiting braking ability. This recall is to verify that the brake booster shield installation was performed properly.
- Risk
- If the brake booster shield was not installed properly, the vehicle's braking ability may be reduced, increasing the risk of a crash.
- Remedy
- Chrysler will notify owners, and dealers will inspect the brake booster shield, correcting the installation as necessary, free of charge. The recall began November10, 2017. Owners may contact Chrysler customer service at 1‑800‑853‑1403. Chrysler's number for this recall is T59.
Recall number 17V572000 · Recall details
Service brakes, hydraulic: foundation components: disc: caliper
- What is wrong
- Chrysler (FCA US LLC) is recalling certain model year 2015-2016 Jeep Grand Cherokee and Dodge Durango vehicles manufactured December 9, 2015, to January 14, 2016. In the affected vehicles, the left front brake caliper may crack due to being made from an incorrect material.
- Risk
- A cracked brake caliper may lengthen the distance needed to stop the vehicle and increase the risk of a crash.
- Remedy
- Chrysler will notify owners, and dealers will inspect the front left brake caliper and depending on its casting date, replace it, free of charge. The recall is expected to begin on May 12, 2016. Owners may contact Chrysler customer service at 1‑800‑853‑1403. Chrysler's number for this recall is S16.
Recall number 16V168000 · Recall details
Service brakes
- What is wrong
- Chrysler Group LLC (Chrysler) is recalling certain model year 2011-2014 Jeep Grand Cherokee and Dodge Durango vehicles manufactured from January 5, 2010, through September 8, 2013. The subject vehicles have a brake booster with a center shell that may corrode and allow water to get inside.
- Risk
- The water inside could freeze and limit the braking ability of the vehicle, increasing the risk of a crash.
- Remedy
- Chrysler will notify owners, and dealers will add a water diverter shield to the booster after the booster has been tested to confirm it can hold an acceptable amount of vacuum pressure. If the booster inspection confirms an unacceptable loss of vacuum pressure, the booster will be replaced. Repairs will be made free of charge. The recall began on May 30, 2014. Owners may contact Chrysler at 1‑800‑853‑1403. Chrysler's recall campaign number is P14.
Recall number 14V154000 · Recall details
Service brakes, hydraulic: antilock/traction control/electronic limited slip
- What is wrong
- Chrysler Group LLC (Chrysler) is recalling certain model year 2012-2013 Dodge Durango and Jeep Grand Cherokee vehicles manufactured October 11, 2011, through October 1, 2012. Under certain braking events, the Ready Alert Braking System (RAB) may result in the driver experiencing a hard brake pedal feel.
- Risk
- If the driver experiences a hard brake pedal, the driver may not push the pedal as intended, lengthening the distance needed to stop the vehicle and increasing the risk of a crash.
- Remedy
- Chrysler will notify owners, and dealers will update the ABS module software, free of charge. The recall began on April 3, 2014. Owners may contact Chrysler at 1‑800‑853‑1403. Chrysler's number associated with this recall is P05.
Recall number 14V104000 · Recall details
Service brakes, hydraulic: antilock/traction control/electronic limited slip: control unit/module
- What is wrong
- On certain sport utility vehicles with anti-lock brake system (ABS), the ABS control module software program may cause the rear brakes to lock up during certain braking conditions.
- Risk
- This could result in a loss of vehicle control and a crash could occur without warning.
- Remedy
- Dealers will reprogram the ABS control module. The recall is expected to begin on december 12, 2005. Owners may contact daimlerchrysler at 1‑800‑853‑1403.
Recall number 05V554000 · Recall details
Service brakes, hydraulic: foundation components: hoses, lines/piping, and fittings
- What is wrong
- Vehicle description: sport utility vehicles. The rear brake tube can contact an underbody crossmember eventually wearing a hole in the tube.
- Risk
- If the tube were perforated, there would be a reduction in braking from the rear wheels, increasing stopping distances.
- Remedy
- Dealers will install a rubber isolator on all vehicles that do not indicate tube contact. Vehicles that show contact and have less than 45,000 miles and no signs of red rust will have the rubber isolator installed with silicone to protect the tube where the coating has worn off. Vehicles that exhibit contact, and have more than 45,000 miles or show signs of red rust, will have the brake tube replaced with the production tube and isolator.
Recall number 99V341000 · Recall details
Questions about the Dodge Durango abs
Why does the abs come on in the Dodge Durango?
Owners who report it most often also describe check engine light, ball joint or control arm failure and brake failure, and the codes they mention most are U0415, U0401 and P0340.
Which Dodge Durango years have aBS light or ABS activating problems?
The model years with the most reports are 1999 (71 complaints), 1998 (28 complaints) and 2000 (21 complaints).
How much does it cost to fix ABS light or ABS activating on the Dodge Durango?
Owners who mentioned a price put the repair at about $1,025 (median of 21 complaints that include a dollar amount). Costs vary with mileage, warranty and where the work is done.
VIN decoder
See the problems and recalls for an exact car
Buying a used Dodge Durango?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history