Hissing noise when steering wheel is turned. Reading info on the web it states that there was a defect in the manufacturing of the hydro-boost hose. I have provided the tech bulletin. Alot of trucks are having this problem. Case number: s1119000007 release date: 09/17/2011 symptom/vehicle issue: power steering honk or hiss may be heard during brake applications. Diagnosis: customers may complain of a noise (honk - sometimes coupled with a hiss during brake applications) during low speed parking lot maneuvers. If you have this complaint, please perform the following: repair procedure: 1. Inspect the steering column intermediate shaft boot is in position and not making noise from rubbing on the shaft. If there is a noise when turning the steering wheel, adjust the boot appropriately and verify the noise is no longer present. 2. If the noise is still present, perform a steering system bleed procedure outlined on techconnect >service info>19-steering>pump>standard procedure>power steering system bleeding and verify the noise is no longer present. 3. If the noise is still present, verify that the pressure hose (to hydro-boost) internal tuner (white plastic hose) has not become dislodged and positioned into the hydro-boost, to do this disconnect the pressure hose from the hydro-boost and see if white plastic tube is protruding from the pressure hose. If it has, replace the hose*, bleed the system of air and verify the noise is no longer present. Note: when returning the hose to the chrysler warranty center, please return the entire hose including the white plastic tuner element that has become dislodged. 4. If the noise is still present, replace the steering gear and bleed the system and verify the noise is no longer present. If the gear change does not eliminate the noise, please contact the star center. Sag2, oct 26, 2011
2006 Dodge RAM 2500: clunking or noise when steering
5 of the 670 complaints about the 2006 Dodge RAM 2500 describe clunking or noise when steering.
- owner complaints
- 5
- of this car's complaints
- 1%
- recalls
- 2
Clunking or noise when steering by model year
- 20091
- 20082
- 20071
- 20065
- 20051
- 20041
- 20022
- 20012
- 19991
- 19981
- 19951
What owners say
Tl* the contact owns a 2006 dodge ram 2500. The contact stated that the steering wheel made a popping sound when turned. The contact received a recall notification for the federal safety agency campaign number: 13v528000 (steering); however, the part needed to repair the vehicle was unavailable. The manufacturer was made aware of the issue. The failure mileage was 250,000.
I received a recall notice in the mail this spring regarding a left tie rod replacedment. I notified don davis dodge in el campo, texas and they stated that they were waiting on parts. I contacted them several times and received the same answer. I called the complaint hotline on 3/10/2014. This week I received another recall notice in the mail for the same thing. I drove to el campo again today, june 1, 2014 and contacted the service department again with don davis dodge, and now they are saying that they have replaced the tie rod on several vehicles lately and have recently been notified that these replacement parts are not good, and they are still waiting on new parts for this recall. This seems to be the same problem at many dodge dealers. I can no longer drive this truck due to this defective part. When I turn to the right I feel it popping in the steering wheel and I was told by the service department at don davis that this is the symptom. They said that they replaced the tie rods on 2 vehicles that had just broken. Now, I can not drive this truck until I get this corrected. I use this truck to haul cattle and I need answers and assistance now. [xxx] information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6).
Tl* the contact owns a 2006 dodge ram 2500. He received a recall notice and feels the wait time was unreasonable. While driving around 20 MPH the contact attempted to make a turn the steering wheel made a loud popping sound. The vehicle was taken to a dealership where the technician diagnosed that the left tie rod needed to be replaced. The manufacturer was not notified about the failure. The failure mileage was unknown and the current mileage was 100,000 miles.
Violent shaking in front end...otherwise known as the "death wobble." also has a clunk in steering wheel. Have replaced upper and lower ball joints, tie rods, and track bar. Have replaced tires, balanced, and rotate/balance ever 5000 miles. Issue still keeps occurring. Has occurred with two separate sets of tires(load e and load d)shop now saying to replace steering shaft, steering box, shocks, and steering stabilizer. Shop also says dodge trucks are their best customers.
Service bulletins that may apply
Related recalls
Steering: linkages: tie rod assembly
- What is wrong
- Chrysler Group LLC (Chrysler) is recalling certain model year 2003-2008 Dodge RAM 2500 4x4 and 3500 4x4, model year 2007-2008 Dodge RAM 3500 4x2 Cab Chassis and model year 2006-2008 Dodge RAM 1500 Mega Cab 4x4 trucks manufactured February 12, 2002, through February 13, 2008. The left tie rod assembly may break.
- Risk
- A failure of the tie rod assembly may result in a loss of steering control, increasing the risk of a crash.
- Remedy
- Chrysler notified owners and launched its recall campaign in January 2014. Owners may contact Chrysler at 1‑800‑247‑9753. Chrysler's recall campaign number is N62.
Recall number 13V528000 · Recall details
Steering: linkages: tie rod assembly
- What is wrong
- Chrysler is recalling certain model year 2008-2011 dodge ram 2500/3500 4x4, manufactured from february 14, 2008, through march 28, 2011; model year 2008-2011 dodge ram 3500 cab chassis 4x2, manufactured from february 14, 2008, through march 28, 2011; and model year 2008 dodge ram 1500 mega cab 4x4, manufactured from february 14, 2008, through august 15, 2008, because the left tie rod ball stud may fracture. This condition tends to occur during low speed parking lot type maneuvers when the customer is making a tight turn. Additionally, model year 2003-2008 dodge ram 2500/3500 vehicles may have received the affected tie rod assembly as a replacement part during normal service.
- Risk
- This condition could result in the potential loss of directional stability in the left hand front wheel, increasing the risk of a crash.
- Remedy
- Dealers will inspect the tie rod ends for relative orientation and replace the left outer tie rod as required and perform a front end toe alignment as needed. This service will be performed free of charge. The safety recall began on october 3, 2011. Owners may contact chrysler at 1‑800‑853‑1403.
Recall number 11V350000 · Recall details
Questions about the 2006 Dodge RAM 2500 steering noise
Is clunking or noise when steering a common problem on the 2006 Dodge RAM 2500?
5 of 670 owner complaints about the 2006 Dodge RAM 2500 (1%) mention clunking or noise when steering. The model year with the most reports is 2006.
Is there a recall or service bulletin for this on the 2006 Dodge RAM 2500?
There are 2 recalls and 1 service bulletin for the same area of the car. Check them below with your VIN.
Other symptoms on the 2006 Dodge RAM 2500
Ball joint 96Wipers 59Headlights 40Power steering loss 15Stalling 12No deployment 8ABS 7Airbag light 6Loss of power 6Adaptive cruise 5Check engine light 5Harsh shifting 5Tire blowout 5
VIN decoder
See the problems and recalls for an exact car
Buying a used 2006 Dodge RAM 2500?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history