Tipm (totally integrated power module) failed, causing vehicles engine to stall at 75mph on freeway. Condition resulted in a "no-start" scenario. Because of this failed tipm, the onboard diagnostic computer has no power, resulting in an inability to diagnose with obdii scan tools. This situation could have resulted in a possibly fatal accident, as the vehicle was in motion at 75mph on a major freeway with moderate traffic. When the vehicle stalled, all power steering and brakes were lost. These parts are prone to failing, but chrysler refuses to accept responsibility. An aftermarket replacement is available at the price of approx. $600, but these parts are special order, and take several days to receive.
2007 Dodge RAM 3500: engine stalls while driving
8 of the 210 complaints about the 2007 Dodge RAM 3500 describe engine stalls while driving.
- owner complaints
- 8
- of this car's complaints
- 4%
- typical mileage
- 86,000
- recalls
- 1
Engine stalls while driving by model year
What owners say
Tl* the contact owns a 2007 dodge ram 3500. While driving at approximately 65 to 70 MPH, the vehicle made a loud banging noise and was towed to an independent mechanic. The technician diagnosed that the axle fractured at the transfer box and damaged the steering linkage. As a result, the transfer box, steering linkage, axle, and five sensors were replaced. The vehicle was repaired. In addition, the engine stalled without warning while towing a large trailer. The vehicle immediately restarted, but the failure recurred multiple times. The vehicle was taken to the dealer multiple times, but was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 54,000.
Tl* the contact owns a 2007 dodge ram 3500. The contact stated that while driving approximately 30 MPH, he heard an abnormal noise along with the need service take to the dealer now warning and then the vehicle stalled. The contact opened the hood to discover that the vehicle was on fire. The fire department extinguished the fire. The vehicle was destroyed. The manufacturer was not notified of the failure. The VIN was unavailable. The approximate failure mileage was 86,000.
On way to work lost power light to see customer service department on. Stalled, restarted, stalled, called tow trk. Has particulate filter replace @ $2600.00 now 4 months back to dealership for same problem.
Tl* the contact owns a 2007 dodge ram 3500. The contact was traveling 35 MPH when the vehicle decelerated independently and stalled. The check engine warning light illuminated prior to the failure. The vehicle was taken to a private mechanic who confirmed that the turbo needed to be replaced. The manufacturer was contacted yet the vehicle was not repaired. The failure mileage was 107,000 and the current mileage was 145,000.
Today while pulling into a parking stall I had a catastrophic steering failure. The drivers side steering tie rod stud fractured where it bolts into the knuckle. The tie rod dropped between the tire and suspension causing loss of steering control and the left wheel was no longer connected to the linkage. I searched several dodge enthusiast forums and it seems other owners have experienced similar failures. This truck was serviced approx 2 years ago at a local dodge dealership and the entire steering linkage was replaced because of loose and knocking steering when turning. The incident today required me to have the truck towed to my residence pending research and possible repair. This vehicle has not been involved in any situation where the steering linkage would have been damaged. I inspected the broken stud and it appears to have had a catastrophic failure of the metal. Any direction or assistance would be appreciated.
07 dodge diesel truck..engine light comes on constantly. Truck is bogging down, losing power and has now stalled twice. May16, truck wouldn't restart and had to be towed. May 29, truck lost power, husband was in construction zone, however was able to restart truck. Been in shop many times for same problem. Dodge can't seem to fix it. Dodge needs to fix or buy back, really love this truck. But, its becoming dangerous to drive.
Tl*the contact owns a 2007 dodge ram 3500. Immediately after purchasing the vehicle in july of 2007, the contact noticed that the catalytic converter warning indicator illuminated on the instrument panel. After the illumination, the vehicle stalled. The dealer repaired the vehicle and they replaced the diesel particular filter. The dealer showed the contact how to reset the computer in order to restart the vehicle whenever it stalled. Recently, the vehicle was towed to the dealer because the exhaust system needed to be fully serviced and repaired. Approximately one week later, one of the truck drivers had to avoid crashing into a school bus because the vehicle stalled again. The vehicle was driven to the dealer and they stated that the diesel particular filter was defective. The manufacturer stated that they would replace the vehicle or purchase it back. The current and failure mileages were 29,000.
Service bulletins that may apply
- Cummins Equipped Vehicles ONLY
- Service
- Valve Body
- NAG1 (5A580)
- Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both...
- Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and...
- Dodge: california emissions recall reprogram ecm-obd readiness
- Dodge: ccn update required with J35 recall
Related recalls
Engine and engine cooling: engine: diesel
- What is wrong
- Chrysler is recalling 108,429 my 2007-2008 dodge ram 2500 and 3500 pickup trucks equipped with 6.7l diesel engines. A silencer pad can sag and contact the exhaust gas recirculation (egr) cooler.
- Risk
- This could result in an engine compartment fire.
- Remedy
- Dealers will add a bracket to support the engine compartment silencer pad adjacent to the egr cooler. The recall is expected to begin during december 2008. Owners may contact chrysler at 1‑800‑853‑1403.
Recall number 08V641000 · Recall details
Questions about the 2007 Dodge RAM 3500 stalling
Is engine stalls while driving a common problem on the 2007 Dodge RAM 3500?
8 of 210 owner complaints about the 2007 Dodge RAM 3500 (4%) mention engine stalls while driving. The model year with the most reports is 2012.
Is there a recall or service bulletin for this on the 2007 Dodge RAM 3500?
There is 1 recall and 20 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 2007 Dodge RAM 3500
Ball joint 34Power steering loss 10Wipers 10Check engine light 8Fire or smoke 7Tire blowout 7Loss of power 6
VIN decoder
See the problems and recalls for an exact car
Buying a used 2007 Dodge RAM 3500?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history