Abs break light came on and the car failed to stop. Was driving on the road in a small town and was stopping to turn on to a road. The problem had also happen when someone has stopped suddenly in front of me and I needed to break suddenly. Had break fluid changed at ford dealership and did not fix the problem. When you need to stop suddenly and hit the breaks hard, the pedal hard it stiffens up and will not stop the car. If you turn off the car and wait a few minutes and turn it back on, it seems to reset it until you hit the breaks hard again.
2006 Ford Escape Hybrid: ABS light or ABS activating
60 of the 219 complaints about the 2006 Ford Escape Hybrid describe ABS light or ABS activating.
- owner complaints
- 60
- of this car's complaints
- 27%
- typical repair cost reported
- $4,300
- typical mileage
- 81,000
- recalls
- 0
ABS light or ABS activating by model year
What owners say
I was driving at a normal speed, approximately 35 MPH, on a city street. As traffic slowed I began to depress the brake pedal and suddenly I got several alerts on my instrument cluster (brake, ABS, and regen disconnect). At the same time I lost all or most of my braking power. I was forced to use the park brake to stop the vehicle, and barely avoided a collision with another vehicle.this was a very frightening experience. After the vehicle sat for a short time, with the engine off, the system apparently reset itself and when I re-started the engine all functions were operational once again, and all the alerts were gone. However, this period was brief. Thinking this might be a system glitch, I cautiously drove the vehicle home. The next day this failure returned after about 20 miles of driving. At this time I realized that there is a serious flaw in the hybrid braking system of this model year ford escape, and possibly other model years. I contacted a local ford dealership and I was shocked when they informed me there are no recalls on this vehicle for this particular failure. As a mechanic I find this ridiculous. After a brief search online I found many hybrid ford escape owner's that had the same problem as I did. At this point I deemed my vehicle unsafe to drive and decided the best thing to do was to report this failure to the federal safety agency with the hopes that the ford motor company will do something about this failure before somebody gets seriously injured or killed. My opinion is the problem is in the hydraulic control unit. (hcu). This is a complex electronic brake control unit that is specific to the ford escape hybrid. For the record my vehicle had about 146,000 miles on it when this happened.
Intermittent ABS and brake warning light with almost complete loss of braking.
The ABS light comes on, and after driving it for a few minutes, the brakes completely do not work. After bringing it to a ford dealership, the part itself is about $5,000 not including labor. (hydrocolic control unit). They didnt recommend fixing it because of how expensive it is. I still owe $5,000 so im stuck paying for a part that is worth more then the car itself.
When applying brakes pedal has to be pressed all the way to the floor and the car continues to move forward almost causing an accident. At this point the ABS light comes on. *tt updated 9/12/18
I was approaching a t-intersection and attempted to make a stop at the stop sign, but the brake pedal resisted my foot pressure and I could not get the vehicle to slow down. I managed to maneuver through the intersection without further incident and spotted a safe place to pull over to gather my thoughts. The brake pedal again failed to work when I attempted to pull over, but I used the emergency brake to stop the vehicle.. Only, this time the brake pedal went all the way to the flood, with no braking effect to the vehicle. This time, unlike the first, 2 brake warning indicators (ABS & brakes!) illuminated on the driver's console. I turned off the vehicle and restarted it, and the indicators had disappeared and the brake pedal had normal resistance to my foot pressure and the brakes worked normally. I called a local ford dealership and they described the problem as a 'glitch', and said it was most likely a sensor or some other computer malfunction, but that no work done to correct the problem would be covered since the vehicle is out of warranty. Wanting more information, I located a video on youtube.com that shows another vehicle with the same problem. The video is searchable and is found under the title of 'ford escape hybrid brake problem'. I searched for any recalls for this same vehicle's VIN, but found none listed. What can be done on behalf of the consumer, especially if those video cost estimations are correct?
I bought a 10 year old 2006 escape hybrid with 73,000 miles. After 4,000 mile the ABS light would go on and the brakes would go into manual mode and the warning lights read check brake system and regen disenaged. After restarting the car the problem would go away. This would happen when the vehicle was moving at various speeds. The car still did stop with more brake pressure. We brought it to the dealer and they reset the error codes and gave us back the car. They stated this was per the ford corporate standards and they could not find anything wrong with the brakes despite the error codes. About 6 weeks later the problem happened again and kept happening. However, this time the brake pedal is soft and we are not confident it will stop every time as it did before. We brought it back to the dealer. Now ford has diagnosed an issue with the master cylinder, hcu and ABS computer all need to be replaced for $8100 (I only paid $7500 for the car). Since ford are the only ones that can calibrate the ABS computer we cannot get the repair cheaper elsewhere. Ford will do nothing because it is out of the warranty period.
After starting the vehicle,(vehicle is stationary) the ABS lights, and brake lights turn on. The brakes go into a safety mode, and don't work unless you push the pedal all the way down to the floor. I can almost roll down my driveway with the brake pedal pushed down all of the way. My driveway has a slight angle to is. Not much of an angle though. The vehicle is not safe to drive on the highway if you don't know if the brakes are going to go out or not.
Abs brake system
Abs light comes on. Brakes are loose. Happened now more than 10 times. We just pull over the side and turn off the car. Start again and brakes work fine for a while. This is an scary car. I use to drive my kids around.
Rear subframe broke above the axle near the differential. Symptoms are grinding noise during left turns as traction control and ABS systems activate. Ford dealer estimates cost of $3=$8,000 to replace the rear subframe. ## VIN passed ## ford escape hybrid awd 2006 ##
Brake light intermittently comes on. Abs light also comes on - loss of braking ability at highway speeds when ABS comes on.
Service bulletins that may apply
Related recalls
No recalls on record for this model year.
Questions about the 2006 Ford Escape Hybrid abs
Is ABS light or ABS activating a common problem on the 2006 Ford Escape Hybrid?
60 of 219 owner complaints about the 2006 Ford Escape Hybrid (27%) mention ABS light or ABS activating. The model year with the most reports is 2008.
How much does it cost to fix ABS light or ABS activating on the 2006 Ford Escape Hybrid?
Owners who mentioned a price put the repair at about $4,300 (median of 19 complaints that include a dollar amount). Costs vary with mileage, warranty and where the work is done.
Is there a recall or service bulletin for this on the 2006 Ford Escape Hybrid?
There are 0 recalls and 2 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 2006 Ford Escape Hybrid
Brake failure 26Stalling 25Loss of power 15Power steering loss 10Engine failure 8Overheating 6
VIN decoder
See the problems and recalls for an exact car
Buying a used 2006 Ford Escape Hybrid?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history