The ABS system fails to engage If the vehicle is coming to a stop and there is even the slightest bump on the road. ABS disengages the brakes which follows with a rapid acceleration of the vehicle instead of slowing down. Issue occurs even If one of the rear tires feels a slight bump. This issue occurs even on dry and hot conditions unrelated to slippery conditions. I am worried in slippery conditions it gets worse.
Ford Escape Hybrid abs comes on
272 of the 1,747 owner complaints about the Ford Escape Hybrid describe aBS light or ABS activating, most of them for the 2008 model year.
- owner complaints
- 272
- worst model year
- 2008
- typical repair cost reported
- $5,000
- typical mileage
- 94,500
By model year
Often reported together
Brake failure 80Jerking 11Check engine light 8Grinding brakes 6Warning lights 5Harsh shifting 5Stalling 3
Trouble codes mentioned
U2023 5C1480 5C1478 4C1526 3U0418 2C1479 2C1477 2C1475 2U3000 1P1A14 1
What owners say
The contact owns a 2022 Ford Escape. The contact stated that upon starting the vehicle, the check engine warning light illuminated and remained illuminated. The vehicle was taken to a local dealer where it was diagnosed, and a code for ABS Internal Module Failure was displayed. The contact was informed that further diagnostic tests were needed to determine the cause of the failure. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 55,000.
The contact owns a 2011 Ford Escape Hybrid. The contact stated that after starting the vehicle, the ABS and traction control warning lights illuminated. Additionally, while attempting to stop the vehicle the brake pedal extended to the floorboard, causing the stopping distance to be extended. The vehicle was taken to the local mechanic who was unable to determine the cause of the failure. The manufacturer was notified of the failure, but no assistance was offered. The local dealer was not contacted. The failure mileage was 85,000.
The car battery keeps being drained by modules staying active, this has affected my car so far twice in a year. This poses a safety issue as the car can get stuck and is inoperative. Ford has 2 service bulletins to repair the issue to reprogram the ABS module and PCM, they are SSM 49574 and SSM 49990. However Ford will not cover these repairs under extended warranty and although the issue initially occurred while under the 3yr/30k warranty but they didn’t have the service bulletins out at that time. This needs to be listed as recall issue as many people on Ford forum have complained about this issue for 2020 Ford Escape hybrids
The contact owns a 2020 Ford Escape. The contact stated that while driving at 15 MPH, the ABS warning light was illuminated. The All-Wheel Drive, cruise control, collision control, and hill assist were all turned off. The contact stated that while the ABS warning light was illuminated the power steering seized. The vehicle was taken to the dealer and was diagnosed, and the contact was informed that the speed sensor needed to be replaced. The vehicle was repaired; however, the failure persisted. The manufacturer was contacted a case was opened. The failure mileage was 29,859.
Vehicle has 32,600 miles. On start, received the following warnings. "Check Brake System", "Hill Start Assist Not Available", Pre-Collision Assist Not Available", and the ABS light was lit. The brakes were extremely hard to use. Had vehicle towed to Dealership. Dealership tested and received Code U3000. They "reprogrammed" the ABS, PCM and IPC Modules and performed a "battery disconnect". The fix was not covered by warranty. The dealership said that this could happen again. They were vague about whether it could occur only on start or at any time. Reoccurrence at road speed would likely result in an accident as the vehicle was extremely hard to stop.
The contact owns a 2007 Ford Escape Hybrid. The contact stated that an abnormal grinding noise would emit from vehicle upon depression of the brake pedal. The contact had taken the vehicle to an independent mechanic for repair. The contact was informed that the ABS module needed to be replaced. The dealer was contacted, and parts were ordered for the repair. The dealer sent the parts to the independent mechanic who repaired the vehicle. Recently, the contact stated that while driving at various speeds, the ABS warning light illuminated as the grinding noise returned. The contact also stated that the brake pedal had begun to depress to the floorboard. The manufacturer had yet to be notified of the failure. The vehicle has been repaired. The failure mileage was approximately 43,000.
The contact owns a 2008 Ford Escape Hybrid. The contact stated that while driving at various speeds, the brake was applied however, was spongy and slow to respond. The ABS warning light was illuminated. The Regan brakes disable failure message was displayed. The vehicle was taken to an independent mechanic who referred the contact to a local dealer. The local dealer was not contacted. The vehicle was not diagnosed nor repaired. The manufacturer was not contacted. The failure mileage was 165,931.
Tl* the contact owns a 2008 ford escape hybrid. The contact stated while driving at various speeds, the brakes would not engage when the brake pedal was depressed. The contact stated that the ABS warning light was illuminated. The contact called jordan ford (609 e jefferson blvd, mishawaka, in 46545) where it was diagnosed with the hybrid brake system needing to be replaced. The vehicle was not repaired. The manufacturer had not been informed of the failure. The failure mileage was approximately 133,540.
Tl* the contact owns a 2009 ford escape hybrid. The contact stated while driving 55 MPH, the check braking system, traction control and emergency brake warning light was illuminated. The contact drove to his destination. The contact stated while restarting the vehicle, the contact had to depress the brake pedal to the floor and use the parking brake to stop the vehicle. The vehicle was not drivable. The vehicle was towed to an independent mechanic and was referred to local dealer. The vehicle was taken to local dealer nick mayer lincoln westlake located at 24400 center ridge rd, westlake, oh 44145, (440) 835-3700, where it was diagnosed with needing the brake master cylinder, brake booster, electronic control unit and module and ABS hydraulic unit to be replaced. The vehicle had not been repaired as of yet. The manufacturer had been informed of failure. The failure mileage was 101,000.
Related recalls
No recalls on record for this model year.
Questions about the Ford Escape Hybrid abs
Why does the abs come on in the Ford Escape Hybrid?
Owners who report it most often also describe brake failure, jerking or lurching and check engine light, and the codes they mention most are U2023, C1480 and C1478.
Which Ford Escape Hybrid years have aBS light or ABS activating problems?
The model years with the most reports are 2008 (113 complaints), 2006 (60 complaints) and 2005 (38 complaints).
How much does it cost to fix ABS light or ABS activating on the Ford Escape Hybrid?
Owners who mentioned a price put the repair at about $5,000 (median of 94 complaints that include a dollar amount). Costs vary with mileage, warranty and where the work is done.
VIN decoder
See the problems and recalls for an exact car
Buying a used Ford Escape Hybrid?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history