2023 Ford Escape electrical problems

Filed Sep 25, 2026 · Driver assistance, Electrical · MA

While driving, multiple unrelated warning lights and warning messages appeared on the dashboard. Odometer changed to display dashes instead of mileage. Speedometer got stuck displaying an incorrect value (such as '0' when the vehicle was in motion, or '59' when the vehicle was as a complete stop). Warning messages displayed while vehicle was in motion included "Park brake fault Service now", "Pre-Collision Assist not available", "Service AdvanceTrac", "Cross-Traffic System fault", and several more. Ford mobile app connected to the car reported 26 different errors. Safety was at risk due to speedometer displaying incorrect values and safety features going offline. Symptoms would come and go without driver intervention. After turning off the vehicle, vehicle failed to start entirely and had to be towed to the dealer. Dealer found the "whole FD-CAN network will not communicate" and traced the issue to an intermittent open circuit in the Power Steering Control Module. Additional photo + video evidence available upon request.

Filed Sep 24, 2026 · Driver assistance, Electrical · CT

About a month ago, my vehicles dash lit up and the car told me to shut it off. I had it towed to the dealership who then completed module updates and said I was all set. 20 minutes after picking it up, all of the lights came back on the dash and I brought it back. They again completed some kind of update with little to no information on what they did or the steps they took. Once again, I picked up my vehicle and immediately had a lit up dash. It was brought back and they had my car for 2 weeks before installing a new module. After picking up my car, I again dealt with lights on my dash, but this time one in particular. I had a notice to “Service Advancetrac” and a notification on my Ford app about Powertrain Failure.

Filed Sep 20, 2026 · Electrical · PA

Ford issued notice 25SC4 then issued another one, 26N15 about the risk of fire with the high voltage battery in my car. These notices state a potential for a short circuit in the battery which they say could result in "increasing the risk of a crash" , "increasing the risk of injury", and it "can progress to a vehicle fire". These are all unacceptable risks to me and my family. Their software "remedy" is to reduce the charging limit to 80% (12% of the electric driving range.) This is not acceptable to me. And the remedy only reduces the risk of a fire, it does not eliminate it. I think to best and safest resolution is to replace the batteries.

Filed Jun 22, 2026 · Electrical · WA

The contact owns a 2023 Ford Escape. The contact received notification of the federal safety agency Campaign Number: 25V789000 (Electrical System); however, the part to do the recall repair was not yet available. The contact stated that the unrepaired recall repair was an inconvenience because the battery could only be charged to 80-percent. The dealer was not contacted. The manufacturer was not contacted. The contact had not experienced a failure.

Filed Jun 1, 2026 · Driver assistance, Electrical · IN

My 2023 Ford Escape is equipped with a factory-installed rearview backup camera system and SYNC infotainment system. Beginning on or around February 2026. I began experiencing a series of recurring, intermittent, and worsening failures with the rearview camera and the Accessory Protocol Interface Module (APIM) that controls it. These failures render the backup camera system unreliable or completely non-functional during vehicle operation. Specific Symptoms Observed •BLUE / BLANK SCREEN: When the vehicle is placed in reverse, the rearview camera display shows a solid blue screen or goes completely blank rather than displaying the rear camera image. This failure occurs with no warning and leaves me unable to see what is behind the vehicle while backing up. •INVERTED / UPSIDE-DOWN IMAGE: The rearview camera image displays upside-down and/or mirrored, rendering the image confusing and unsafe. Guidelines, directional aids, and proximity warnings displayed on screen are also inverted, making them unusable. •DISTORTED / CORRUPTED IMAGE: The camera feed displays visual distortion, artifacts, freezing, flickering, or corruption that makes it impossible to accurately interpret what is behind the vehicle. •APIM FAILURE: The Accessory Protocol Interface Module (APIM) — the core software module controlling the SYNC 3 display and camera feed — has failed or malfunctioned. Dealership diagnosis has identified the APIM as requiring repair or replacement. This module failure is the root cause of the camera display issues described above. The failures occur intermittently and unpredictably. The camera may function correctly for a period, then fail on the next use. In some cases, the failure is persistent across multiple ignition cycles. There is no consistent triggering condition — the defect occurs in varied weather conditions, temperatures, and after varying periods of use. Turning the vehicle off and back on sometimes temporarily restores the camera, but the defect returns.

Filed May 20, 2026 · Driver assistance, Electrical · NJ

[Recurring No-Start Issue with Multiple Warning Alerts – Safety Concern] I am reporting a recurring vehicle issue involving failure to start, which I believe may pose a safety risk. The issue has occurred five times: August 11, 2023 April 12, 2025 June 13, 2025 December 12, 2025 April 1, 2026 During these incidents, the vehicle failed to start and displayed multiple warning messages on the dashboard. On some occasions, the vehicle only started after several hours. The vehicle becomes completely inoperable when this issue occurs. After the third occurrence, I brought the vehicle to an authorized service center. However, the issue was not resolved and has continued to occur. This repeated failure raises serious concerns about vehicle reliability and safety, as the vehicle may become inoperable without warning. I have attached documentation, including repair records and photos of the dashboard warnings. I am submitting this report so that this issue can be properly investigated.

Filed May 15, 2026 · Electrical, Engine · WI

1.engine failed and my infotainment system turned off 2.i feel like I was scared because I didnt know if I was going to come back on 3. No 4. No

Filed May 5, 2026 · Electrical · 28,000 miles · IL

The contact owns a 2023 Ford Escape. The contact stated that while driving at an undisclosed speed, the message "Battery Issue, Pull Over" displayed, and the battery, check engine, and master warning lights illuminated. The contact pulled over and contacted the dealer, who instructed him to turn off and restart the vehicle. After following the dealer's instructions, the failure was resolved. The contact later received notification of the federal safety agency Campaign Number: 26V091000 (Electrical System); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the recall but confirmed that parts were not yet available. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 28,000.

Filed Apr 27, 2026 · Electrical · 34,756 miles · MO

The contact owns a 2023 Ford Escape. The contact stated that while attempting to start the vehicle, the radio displayed a blank screen. A dealer was contacted. No warning light was illuminated. The vehicle was not taken to the dealer or an independent mechanic to be diagnosed. The contact stated that the failure had occurred on several occasions. The manufacturer was not notified of the failure. The approximate failure mileage was 34,756.

Filed Mar 26, 2026 · Electrical · CA

The contact owns a 2023 Ford Escape. The contact received notification of the federal safety agency Campaign Number: 25V789000 (ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.