Due to extensive rust damage despite proper preventative maintenance, the integrity of the frame/chassis of the vehicle was compromised. Subsequently, the left side of the frame at the midway point of the length of the vehicle snapped completely separating into two pieces. The rust damage also caused the spare tire apparatus to break and also caused the bumper to fall off.
2005 Ford Ranger suspension complaints
Page 2 of 2: complaints 11 to 26 of 26, newest first, as owners wrote them.
Bought this truck new and after its first winter, was already showing severe rusting on the frame, now 11 years later the rear frame is rusted so severely that the rear spring shackles mounting brackets have completely failed and the metal on the rear frame rails is severely rusted and perforated where the spring shackle brackets attach to the frame, also the spare tire hoist assembly that holds the spare under the truck , has also failed and is dangerous, can no longer use it as spare tire is a severe safety hazard of falling off the truck that could severely injure or kill another motorist should it fall off the truck and strike another vehicle or fly through someones windshield. The federal safety agency should require that ford recall these trucks, and be required to replace the frames, similar to the toyota tundra recall several years ago for rust problems on their frames, a truck frame should not rust away on a 2005 ranger that has 98,000 original miles on it! Ford failed to provide any corrosion protection on these ranger truck frames.
L/front suspension snapt from the frame (the frame brock).
Fist size and multiple finger size rust holes in frame. Spare tire mounts completely rusted off.spare tire was held on by steel line. When I was driving down the highway leaf spring mount on driver side rusted completely off. Leaf spring now pushes up on bottom of the bed. Also happened while driving down highway heard a loud bang. Got home and seen that is what happened. Driving this truck puts anyone on the road in immediate danger. Driver and others. I would say everything that has happened would be "near misses"
Tl* the contact owns a 2005 ford ranger. The contact stated that the rear and spare tire frame rotted. The failure caused the spare tire to drop. The vehilce was taken to an independednt mechanic where the technician diagnosed that the frame needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was 59,000. Updated 6/8/15
Spare tire and carrier detached from frame. Rear bumper detached from frame. Right rear leaf spring shackle collapsed. Gasoline support strap detached from frame cross member. Midsection of frame cracked at 47,000 miles. This was all due to corrosion of metal over the last two years.
I have a 2005 ford ranger extended cab. I was driving it and I noticed that my brakes felt really funny so I brought it to my mechanic and he told me that the brake lines were rotted out, but more importantly that the frame was rotted out. The body mounts are rotted out, the shackles are about to fall off. He also said that the frame rails in between the leaf springs are about to break in half, and if this happened to me while I was driving I could have killed someone or myself. I am very concerned about my safety and the safety of everybody else driving a ford ranger that is not aware if its issue. I am also now stuck with a truck that needs work done that will cost twice as much as it is worth.
Severe frame rust noted after 8/2014 maine safety inspection. Chances of vehicle passing a 2015 inspection very remote according to the tech doing the vehicle certification. Only 5 maine winters endured by the vehicle 2005_2010. Parked & garaged the last 4 winters.otherwise the vehicle is pristine. Lots of other folks with similar issue according to research of local body shops. Why??
Under- bed mounted spare tire mounts rusted through causing tire to break free from vehicle at highway speeds. Upon further inspection it was noted vehicle has serious frame damage from rust, particularly the fuel tank support straps. The frame is falling apart at an alarming rate.
My husband t-boned a semi at 35 MPH. The truck spun around and the rear of the truck also hit the semi. The airbags did not deploy. He incurred multiple injuries, some of which could have been minimized had airbags deployed. The truck was totaled. There was a direct hit -- I.e. Front of truck hit side of semi and destroyed engine (and more), yet air bag did not deploy. .
Top of frame from the shock towers forward have rusted thru and the frame has split. The vehicle is only 8 years old, has only 97,00 miles on it, and has never been in an accident. Vehicle is garaged at night and has not been driven in a snow storm during the last four years. Otherwise vehicle is in excellent condition.
Hit a parked van.
I am curious why there has been no recall on the ford ranger front wheel bearing issue with the hundreds of complaints out there. We the consumer driving on the roads need to be protected better.
Dt*: the contact stated while driving at various speeds, there was a clunking noise coming from the front suspension. The vehicle was taken to an authorized dealership for inspection. The dealer replaced the tie rod assembly and upper control arm bushings however, the problem persisted.
Dear sirs; I am a night shift autoworker at ford ranger plant in st paul. My job is to build and mount a swaybar on the rear axle. For over a year I have expressed my concerns to management about the proper angle to mount the swaybar brackets. I feel like I have been stonewalled, told things like "it doesen't matter". It does matter to our customers. They want that swaybar to be perfect. It might make all the difference if there has to be a hard swerve to avoid a deer or child in the road. There needs to be some numerical point of reference on record in the manufacturing process guidelines. The operator either needs a tongue and groove system on the axle and swaybar bracket and/or some type of fixture that would act as a guide to insure the correct angle is achieved for every build process. There also needs to be an instrument that capable of checking each one for correct angle.
Dt: contact stated there is vibration in the rear end of vehicle while going approximately 50 MPH. The service dealer can't find the problem. They did replace the tires on the vehicle, but this did not resolve the problem.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2005 Ford Ranger?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history