2007 Freightliner Cascadia problems

What is wrong

Daimler Trucks North America LLC (DTNA) is recalling certain 2002-2017 Freightliner Cascadia, Century Class, Columbia and Coronado trucks and Western Star 4700, 4900, 5700, 5900 and 6900 trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit:

Risk

In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

Remedy

DTNA will notify owners, and instruct them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began on April 11, 2018. Owners may contact DTNA customer service at 1‑800‑547‑0712, or contact Kidde customer service toll-free at 1‑855‑262‑3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. DTNA's number for this recall is FL-759.

Recall number 17V810000 · Recall details

What is wrong

Daimler Trucks North America LLC (DTNA) is recalling certain model year 2007-2011 Freightliner Cascadia trucks manufactured March 26, 2007, to August 31, 2010. Water may leak into the Signal-detection and Activation Module (SAM) Chassis causing corrosion which may result in electrical shorts or possible intermittent operation of trailer lights.

Risk

Intermittent operation of the trailer lights may prevent other drivers from knowing that the truck is slowing or stopping, increasing the risk of a vehicle crash. Additionally, an electrical short in the SAM chassis may result in a a fire.

Remedy

DTNA will notify owners, and dealers will inspect the SAM chassis for corrosion, replacing it as necessary. Any vehicle that does not have a drip shield mounted in the cab over the SAM chassis will receive one. These repairs will be performed free of charge. An interim letter was sent to owners on May 4, 2015. The recall began on October 8, 2015. Owners may contact DTNA customer service at 1‑800‑745‑8000. DTNA's number for this recall is FL-679.

Recall number 15V127000 · Recall details

What is wrong

Daimler trucks (dtna) is recalling certain model year 2006-2013 freightliner, sterling, and western star vehicles, equipped with detroit diesel epa07 and epa10, dd13 and dd15/16 engines, manufactured from january 20, 2006, through february 20, 2012. The pump to rail high pressure fuel line support system used on these engines is sensitive to assembly torque and may be damaged during service work. As a result of other repairs, the line supports may loosen, potentially leading to fuel line cracking and a fuel leak.

Risk

A fuel leak could create a road hazard, increasing the risk of a crash. Also a fuel leak in the presence of an ignition source can result in a fire.

Remedy

Dtna will notify owners, and where necessary, the high pressure fuel line support system will be replaced by dtna authorized service facilities, free of charge. The safety recall began on april 27, 2012. Owners may contact dtna at 1‑800‑547‑0712.

Recall number 12V074000 · Recall details

What is wrong

Daimler trucks is recalling certain model year 2005-2011 freightliner cascadia, columbia, century, coronado, and classic xl trucks manufactured from november 1, 2004, through june 15, 2010 for the rack and pinion steering system. The lower pinion bearing may corrode and fail. A failed bearing may lead to damage of the spool valve seals. A damage spool valve seal may allow hydraulic fluid to flow to the right or left turn port instead of flowing to the return port.

Risk

The steering could unexpectedly turn left or right, making the vehicle more difficult to control and increasing the risk of a crash.

Remedy

Daimler trucks will inspect the lower bearing for corrosion. If corrosion is found, the rack and pinion system will be replaced. If no corrosion is found, on the bearing, the bearing will be packed with grease and the rubber bellows will be replaced with sealant added between the bellows and the rack housing. An interim letter was mailed in december 2011. Owners may contact daimler trucks toll-free at 1‑800‑547‑0712.

Recall number 11V514000 · Recall details

What is wrong

Daimler trucks is recalling certain model year 2004 through 2008 heavy trucks manufactured from july 11, 2003, through september 28, 2007, equipped with epa04 model mbe4000 engines built with plastic low pressure fuel lines and fuel filters mounted near the center of the engine on the left-hand side. The plastic low pressure fuel line between engine mounted fuel filter and engine block may develop a substantial diesel fuel leak.

Risk

This could create a road hazard increasing the risk of a crash. Fuel leakage, in the presence of an ignition source, could result in a fire.

Remedy

Daimler trucks will notify owners and the remedy will be performed by detroit diesel corporation authorized repair facilities. Vehicles will be inspected and the plastic low pressure fuel line will be replaced with a steel low pressure fuel line. This service will be performed free of charge. An interim letter was mailed to owners on october 28, 2011. The safety recall began on february 21, 2012. Owners may contact daimler trucks at 1‑800‑547‑0712.

Recall number 11V478000 · Recall details

What is wrong

Daimler trucks is recalling certain model year 2006-2012 freightliner business class m2, cascadia, century, columbia, coronado and sterling a-line vehicles built with meritor wabco electronic stability control (ESC) system manufactured from september 15, 2005 through september 1, 2011. Under certain road and driving conditions, vehicle body roll and road inclination characteristics may adversely affect the slip angle calculation of the electronic stability control (ESC) system. This might cause the ESC to perceive an over steering situation and therefore apply the outer wheel brake on the front axle until the vehicle is perceived to be stable.

Risk

If the driver is slow to react during this ESC intervention, the vehicle may deviate from the intended line of travel increasing the risk of a crash.

Remedy

Daimler trucks will notify owners, and dealers will replace the ESC module with the appropriate software version as necessary, free of charge. An interim owner notification will be mailed on or about november 21, 2011. The date for availability of the final remedy is subject to validation testing and parts availability. The safety recall began on march 28, 2012. Owners may contact daimler trucks toll-free at 1‑800‑547‑0712.

Recall number 11V465000 · Recall details

What is wrong

Daimler trucks (dtna) is recalling certain model year 2006 through 2011 freightliner, cascadia, century, columbia fld, and m2, sterling 9500, and western star 4900 heavy trucks manufactured from march 20, 2006, through june 30, 2010, equipped with specific mbe4000 epa07 model engines. The intake air grid heater may short circuit and fail due to excessive internal temperatures.

Risk

A short circuited grid heater could result in a vehicle fire and injury to vehicle occupants.

Remedy

Dtna will notify owners of the recall during march 2011. Another notification will be issued once the remedy is released. Dtna expects the remedy to be available by december 1, 2011. Repairs will be performed by dtna dealers free of charge. Owners may contact dtna toll-free at 1‑800‑547‑0712. This recall is asscociated with a previous recall, campaign number 10v‑341.

Recall number 11V146000 · Recall details

What is wrong

Daimler trucks is recalling certain model year 2007 through 2011 freightliner, fccc, sterling, and western star heavy trucks manufactured from september 5, 2006, through june 30, 2010, equipped with specific mbe900 epa04 and epa07 model engines. The intake air grid heater may short circuit and fail due to excessive internal temperatures.

Risk

A short circuited grid heater could result in a vehicle fire and injury to vehicle occupants.

Remedy

Daimler trucks will notify owners and dealers will repair the buses free of charge. Repairs will be performed by detroit diesel corporation authorized repair facilities. The safety recall is expected to begin on or about july 29, 2011. Owners may contact daimler trucks toll-free at 1‑800‑547‑0712.

Recall number 10V341000 · Recall details

What is wrong

Daimler trucks is recalling model year 2007-2010 freightliner, sterling and western star vehicles equipped with detroit diesel dd15 epa07 engines which were manufactured with grid heaters. Increased internal grid heater resistance caused by improperly tightened screws may melt the solder on the grid heater circuit board leading to a short circuit.

Risk

A short-circuited grid heater could result in a vehicle fire and injury to vehicle occupants.

Remedy

The engine control logic will be reprogrammed free of charge by detroit diesel authorized repair facilities and direct warranty customers to provide cold weather starting without the need of a grid heater. The safety recall began on november 4, 2009. Owners may contact detroit diesel at 1‑313‑592‑5800 and daimler trucks at 1‑800‑547‑0712.

Recall number 09V400000 · Recall details

What is wrong

Daimler trucks is recalling certain model year 2006 through 2010 heavy trucks manufactured between january 17, 2006 and march 31, 2009, equipped with epa07 model mbe4000 engines built with plastic low pressure fuel lines. The plastic lines may experience leaks due to fatigue cracks caused by stress and vibration combined with high internal pressure.

Risk

If a diesel fuel leak continues undetected under certain conditions fuel may ignite on a hot engine surface and/or fuel may spill on the road increasing the risk of a crash.

Remedy

Daimler trucks will notify owners and the remedy will be performed by detroit diesel corporation authorized repair facilities and direct warranty customers. The safety recall began on may 7, 2010. Owners may contact daimler trucks at 1‑800‑547‑0712.

Recall number 09V391000 · Recall details

What is wrong

Daimler trucks is recalling certain model year 2005 through 2010 heavy duty trucks manufactured from october 29, 2005 through july 3, 2009. Under certain condition, the left hand inner tie rod end may loosen over time and if not corrected, potentially separate from the steering rack.

Risk

A separated tie rod assembly can result in loss of vehicle control at higher speeds and a crash could occur.

Remedy

Daimler trucks will notify owners and the vehicles will be repaired free of charge. The safety recall began on february 5, 2010. Owners may contact daimler trucks toll-free at 1‑800‑547‑0712.

Recall number 09V357000 · Recall details

What is wrong

Daimler trucks is recalling 14181 my 2007-2009 freightliner cascadia trucks equipped with cab signal-detect and activation modules (sams). Potential corrosion damage due to water intrusion into the sams may cause electrical shorts or intermittent operation of tail lamps, stop lamps, side marker lamps and trailer lighting. In some cases starter motors have activated without a key on.

Risk

An electrical short in the cab sam or chassis sam may cause melting in the sam or other electrical components which may cause a vehicle fire.

Remedy

Dealers will inspect for indication of water intrusion or damage to the sams. Sams will be replaced as required and modifications will be completed to control possible sources of water intrusion. The recall is expected to begin on or before february 13, 2009. Owners may contact daimler trucks at 1‑800‑547‑0712.

Recall number 09V024000 · Recall details

On August 31, 2020, the Office of Defects Investigation (ODI) opened a recall query, RQ20001, to investigate the allegations of water intrusion into the truck cab signal-detect and activation module (SAM cab).The investigation further evaluated the effectiveness of the original recall remedy, and the installation of an updated drip shield as it relates to continual water intrusion resulting in the loss of electrical functions and potential fire.The potential hazard was the increased risk of a crash and injury in certain model year (MY) 2007-2021 Freightliner Cascadia P3 vehicles manufactured by Daimler Trucks North America (DTNA). ODI sent DTNA an information request (IR) letter on September 29, 2020.DTNA's November 20, 2020, IR response detailed how the company had implemented various improvements through recall 09V024 and multiple technical service bulletins (TSBs) to mitigate water intrusion.The effectiveness of new windshield seals and revisions to the drip shield is evident by the downward trend in claims rate from an average high of 7.64% in the beginning product life of Cascadia P3 (MYs 2007-2009), to 1.79% average for MYs 2011-2018, and down to 0.49% towards the end of the Cascadia P3 production.Moreover, the data shows that most failures occurred within the first three years of service with a significant downward trend thereafter. In view of the current overall low failure rate, the nature of early-life failure, and failure rate trending downward since model year 2017, this Recall Query (RQ) is closed. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to

RQ20001

On April 23, 2018, the National Highway Traffic Safety Administration (“the federal safety agency”) opened Audit Query (AQ18002) to assess the timeliness and scope of four recalls filed by Daimler Trucks North America, LLC (“DTNA”). the federal safety agency subsequently expanded AQ18002 to examine the timeliness and scope of three additional DTNA recalls and compliance with early warning reporting and manufacturer communications reporting requirements. the federal safety agency and DTNA entered into a Consent Order on December 29, 2020, to resolve the federal safety agency’s assertions that certain recalls within the scope of AQ18002 were untimely, DTNA failed to timely submit certain manufacturer communications to the federal safety agency, and DTNA failed to submit field reports to the federal safety agency as required. As part of the Consent Order, DTNA agreed to a total civil penalty of thirty million dollars ($30,000,000), of which ten million dollars ($10,000,000) was paid on January 12, 2021. Also, of that total civil penalty, DTNA agreed to spend five million dollars ($5,000,000) on the specific performance obligations to develop advanced data analytics capabilities to enhance its ability to detect and study emerging safety-related defect trends on its vehicles (“Safety Data Analytics infrastructure”) and an advanced data analytics and reporting platform that integrates data on emerging safety-related defect trends on its vehicles and recall lessons learned (“Safety Communications Platform”). The Consent Order also held fifteen million dollars ($15,000,000) of the civil penalty in abeyance pending DTNA’s satisfactory completion of the requirements of the Consent Order, and its compliance with the Safety Act, and regulations thereunder. the federal safety agency and DTNA agreed to a two-year term for the Consent Order—with an option for the federal safety agency to extend the Consent Order for an additional year, if warranted. In the Consent Order, DTNA agreed to numerous performance obligations, including monthly meetings with the federal safety agency to discuss potential safety issues, recent manufacturer communications, and recall decision-making, among other things; quarterly meetings with the federal safety agency to discuss DTNA’s progress on the performance obligations under the Consent Order, including the Safety Data Analytics infrastructure and Safety Communications Platform, and any issues related to compliance with the Consent Order, Safety Act, or regulations; development of written procedures and employee training materials to help DTNA comply with its legal obligations to timely identify and report safety defects and noncompliances, submit complete and accurate recall filings, and timely submit manufacturer communications and field reports to the federal safety agency; and identifying and reporting previously unreported manufacturer communications and field reports. Also, via the Consent Order, DTNA acknowledged that the failure or inability to identify a specific root cause, develop an adequate remedy or repair, or confirm the affected population of vehicles are not bases for delaying filing a recall with the federal safety agency. On December 22, 2022, the federal safety agency extended the Consent Order for a term of one year due to concerns about DTNA’s compliance with its recall-related obligations. Specifically, the federal safety agency expressed concerns about the completeness of DTNA’s recall reports and issues identified with owner notification letters during the term of the Consent Order, as well as the length of time that DTNA took to consider a straightforward noncompliance issue before filing a recall and DTNA’s interactions with the federal safety agency during the term of the Consent Order. the federal safety agency addressed these concerns with DTNA during the third year of the Consent Order. The extended term of the Consent Order expired on December 28, 2023. Based on the Consent Order, this investigation, AQ18002, is closed. Closure of this AQ has no bearing on the terms of the Consent Order or DTNA’s ongoing legal obligations, and it does not represent a determination by the federal safety agency as to DTNA’s performance under the Consent Order.

AQ18002

A consumer complaint was filed with the agency on august 22, 2009, by an independent contractor leasing a 2009 freightliner cascadia.the complaint alleges that in april of 2009 at approximately 50,000 miles he experienced a seal rupture in the rack and pinion assembly.a new seal was installed and at 56,000 miles he found his right steer tire completely bald.the repair shop identified an internal failure of the rack and pinion assembly causing the rapid wear of the tire.odi has identified ewr field reports related to failed rack and pinions on the subject vehicles.the reports identify either an internal failure of the rack and pinion assembly that resulted in crashes or a looseness of the inner tie rod end of the rack and pinion resulting in a poor alignment and premature tire wear.information received during this investigation from freightliner detailed failures of the rack and pinion assemblies on the subject vehicles.these failures were the result of the left hand inner tie rod end becoming loose over time.when the tie rod becomes loose, it may separate from the rack and pinion assembly and make the vehicle difficult to steer.frieghtliner has concluded that a defect related to motor vehicle safety does exist on the subject vehicles and has initiated a safety recall (09v‑357) that will remedy all of them.this recall involves removing the tie rod and adding a compound to it that will prevent the tie rod from coming loose over time.a copy of the recall is attached.freightliner's action resolves the issues raised by this investigation and, therefore, this investigation is closed.

PE09040