After recent brake fluid recall and a few days of riding, on my way home at a stop the front brake lever didn't release as usual. At the next stop the brakes wouldn't fully disengage, this made it so the bike could barely move under its own power. The front brakes are locked up and will not allow the bike to roll forward. After sitting for a day or so the brakes loosen up, as soon as the bike is started the front brakes lock up again. The ABS light is now on. Extremely dangerous condition. The dealership thinks it is the hcu unit, but is currently investigating.
The worst 2008 Harley-Davidson FLHP problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
- Brakes3
- Body1
- Fuel system1
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
- Brakes3
- Body1
- Fuel system1
Recalls 2
Service brakes, hydraulic: antilock/traction control/electronic limited slip
- What is wrong
- Harley-Davidson Motor Company (Harley-Davidson) is recalling all 2008-2011 Touring, CVO Touring and VSRC motorcycles equipped with anti-lock brakes (ABS), including Road King (FLHR), Road King Police (EFI) (FLHP), Road King Police (EFI) (FLHPE), Electra Glide Standard Police (EFI) (FLHTP), Electra Glide Classic (EFI) (FLHTC), Electra Glide Ultra Classic (EFI) (FLHTCU) and Street Glide (EFI) (FLHX), 2008 VROD (VRSCAWA), CVO Road King 4 (FLHRSE4), Night Rod (VRSCDA), CVO Ultra Classic 3 (FLHTCUSE3), Night Rod Special (VRSCDXA), 2008-2010 Road King Classic (EFI) (FLHRC), 2008-2009 Road Glide (EFI) (FLTR) and Electra Glide Standard (EFI) (FLHT), 2009-2010 V-Rod (VRSCAW), 2009 CVO Ultra Classic (FLHTCUSE4) and CVO Road Glide 3 (FLTRSE3), 2009-2011 Night Rod Special (VRSCDX) and V-Rod Muscle (VRSCF), 2010 CVO Ultra Classic 5 (FLHTCUSE5) and CVO Street Glide (FLHXSE), 2010-2011 Electra Glide Ultra Limited (FLHTK) and Road Glide Custom (FLTRX), 2011 Road Glide Ultra 103 (FLTRU103), Street Glide 103 (FLHX103), Road King Classic 103 (FLHRC103), CVO Ultra Classic 6 (FLHTCUSE6), CVO Road Glide Ultra (FLTRUSE), Road Glide Custom 103 (FLTRX103), and CVO Street Glide 2 (FLHXSE2) motorcycles. Deposits may form on components within the brake system if the DOT 4 brake fluid is not replaced for a prolonged period of time beyond the 2-year maintenance schedule specified in the Owners Manual.
- Risk
- These deposits may cause a valve within the ABS Hydraulic Control Unit to stick, reducing braking ability and increasing the risk of a crash.
- Remedy
- Harley-Davidson will notify owners, and dealers will flush the entire brake system with new Platinum Label DOT 4 brake fluid, free of charge. The recall began on February 14, 2018. Owners may contact Harley-Davidson customer service at 1‑800‑258‑2464. Harley-Davidson's number for this recall is 0171.
Recall number 18V076000 · Recall details
Fuel system, gasoline: storage: tank assembly: filler pipe and cap
- What is wrong
- Harley davidson is recalling 47,579 my 2008 flhp, flhpe, flhr, flhrc, flhrse4, flht, flhtc, flhtcu, flhtcuse3, flhtp, flhx, and fltr motorcycles. These motorcycles may experience a cracking of the fuel filter shell leading to loss of fuel pressure. This loss of fuel pressure can cause diminished performance and, in some cases, may cause an engine stall or a no-start condition.
- Risk
- This condition could lead to a crash which could cause injury or death to the rider.
- Remedy
- Dealers will replace the fuel filter shell free of charge. The recall began on july 31, 2008. Owners may contact harley davidson at 1‑414‑343‑4056.
Recall number 08V357000 · Recall details
See all 2 recalls for the 2008 Harley-Davidson FLHP
Defect investigations
Sudden Brake Failure - Motorcycle
The Office of Defects Investigation (ODI) opened this investigation in July 2016 based on forty-three (43) Vehicle Owner Questionnaires (VOQ).During the course of this investigation ODI received a total of 145 VOQs related to the alleged defect on the subject motorcycles.Owners allege they experience a sudden and complete loss of brakes on one or both wheels.To better understand the cause of the braking issue on the subject motorcycles, ODI requested the federal safety agency's Vehicle Research and Test Center (VRTC) conduct inspections and testing of affected vehicle braking systems.Through its work, VRTC determined that deposits were forming on the valves in the Hydraulic Control Unit (HCU) of the Antilock Braking System (ABS). These deposits could prevent the proper function of the HCU and render the brakes ineffective.To understand why deposits were forming in the HCU, Harley Davidson completed an analysis of the Dow 460 brake fluid used as original equipment on the subject motorcycles and determined that it had stability issues if left in the brake system for an extended period of time.Harley Davidson found that if a brake fluid flush was not conducted as outlined in the owner?s manual for the motorcycles, and was left in the system for a period of time beyond their recommendation; deposits could form in the HCU.Through further testing, Harley Davidson identified an alternate, commercially available, brake fluid that did not have the same stability issues as the original fluid and could stop the proliferation of any current brake system deposits.ODI sent Information Request (IR) letters to Harley Davidson and Dow Chemical (the supplier of the brake fluid on the subject motorcycles) to collect information about the subject bikes and the alleged defect.Harley Davidson responded in full on Sept 30, 2016 and Dow responded with a confidential submission on October 25, 2017.ODI analyzed the information contained in both IR responses and concluded that motorcycles manufactured during Model Years (MY) 2008, 2009, 2010, and 2011 were failing at a rate greater than their peers.Based on this analysis and the brake fluid study conducted by Harley Davidson, a group of motorcycles was identified that were potentially affected by the instability of the original brake fluid.2008 marked the introduction of ABS on Harley Davidson motorcycles and a change in the Dow 460 brake fluid used in the 2012 MY vehicles provided the bases for the scope of the affected population.With recall action 18V‑076 taken by Harley Davidson this investigation is closed as further use of agency resources does not appear to be warranted.The ODI reports cited above can be reviewed at: using the complaint identification numbers attached to this resume.
PE16009
Technical service bulletins for the 2008 Harley-Davidson FLHP 13
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- Battery warranty guidelines
- Market specific battery introduction
- Milwaukee eight and twin cam camshaft drive gear retention kit changes
- Digital technician II - updates and release notes
- Genuine motor parts and motor accessories bulletin PAB1158: oil filter packaging and case quantity update
- Digital technician II - updates and release notes
- Milwaukee-eight and twin cam transmission gear packs.
- Genuine motor parts and motor accessories bulletin PAB1146: 68193-95 bulb wedge, fender tip lamp.
- Milwaukee-eight and twin cam transmission gear packs.
- Milwaukee-eight and twin cam transmission gear packs.
What 2008 Harley-Davidson FLHP owners say
Most recent owner complaints, unedited.
Tl* the contact owns a 2008 harley-davidson flhp street glide. While driving 15 MPH, the contact depressed the brake pedal and the hand brakes to stop the motorcycle. The brakes failed and the motorcycle crashed into a building. There were no injuries and a police report was not filed. The motorcycle was taken to an independent mechanic who diagnosed that the brakes failed. The vehicle was repaired. The manufacturer was not notified. The failure mileage was approximately 38,000.
I purchased this motorcycle on 1/17/2014. On 1/18/2014 I took this vehicle for a ride. The front brakes operated but had very little deflection or movement from the brake lever. The front brake lever was extremely hard to pull. I contacted the dealer and was told that this was normal. I continued to ride the vehicle and I noticed that not only were the brakes hard to engage, they also would not hold at red lights. I then brought this to the attention of the dealer and I was told that the hmu had a sticking valve and that it needed to be replaced at the tune of $1200.00. I was informed that the ABS on these motorcycles was supposed to feel like a normal braking system and had a failsafe in place that insured that if something went wrong it would resort to a safe mode and the brakes would operate normally. In this case they are not acting normal and I describe it in this manor. If you have ever shot a hand gun, the trigger pull is approximately13 pounds of pull. My from brake lever is approximately 60 pounds of pull and it will creep towards the grip at a red light. After a minute of being stopped and holding the front brake lever, the front brakes are nonexistent. I have done internet research and my findings are that this malfunction is very common and does pose a safety hazard to those that experience it. I was also amazed that many people that have experienced this have suffered more serious problems. Front brakes that lock up and cause serious bodily injury and property damage. I'm reporting this based upon the severity and that it can cause brake failure leading to a catastrophic accident.
Tl*the contact owns a 2008 spencer bowman customs high roller chopper ht motorcycle (na). While driving less than 30 MPH, the frame fractured on the vehicle. No repairs have been made. The current and failure mileages were less than 1,200. Updated 05/05/09
I am in receipt of a recall notice from harley davidson motorcycle company regarding a potentially defective fuel filter housing, the failure of which "could lead to a crash which would cause injury or death to the rider." in contacting the servicing dealer, I am informed they do not have parts from the manufacturer, and are unable to provide a date when parts will become available adding that the manufacturer is shipping sporadically. The service department advise they have had a number of incidents prior to the official recall, hence there was prior notice of failure and the dealer should have acted to insure adequate supply of necessary parts. In fact, motorcycles at risk date to mid-2007. As this is my primary transportation and there is no way of determining prior to failure that your particular motorcycle is at risk, this failure to supply adequate parts is completely unacceptable and grossly negligent.
Compare the 2008 Harley-Davidson FLHP
Other model years
Questions about the 2008 Harley-Davidson FLHP
Is the 2008 Harley-Davidson FLHP reliable?
Owners have filed 5 complaints about the 2008 Harley-Davidson FLHP, 2.5 times a typical FLHP model year.
What is the most common problem with the 2008 Harley-Davidson FLHP?
Brakes, with 3 complaints. Next is body (1).
How many recalls does the 2008 Harley-Davidson FLHP have?
2 recalls, covering service brakes, hydraulic and fuel system, gasoline.
Was there a recall on the 2008 Harley-Davidson FLHP brakes?
Yes, 1 recall: 18V076000. Check your VIN to see if your car still needs the free repair.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2008 Harley-Davidson FLHP?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history