While driving my 2016 Honda Pilot Touring (approx. 110,000 miles) with my wife and two children [XXX] , the vehicle suddenly malfunctioned without warning. As I was coming to a stop, the dashboard lit up with multiple warning lights and the engine appeared to stumble/stall. Once I regained focus, I could hear a loud ticking/knocking from the engine. This sudden failure put my family’s safety at risk while the vehicle was in motion. I brought the vehicle to the dealership where all maintenance has been performed since purchase. A diagnostic scan revealed code P0302 (misfire cylinder 2). Upon inspection, the mechanic found metal shavings in the oil filter and determined that cylinder #2 suffered a spun rod bearing, resulting in connecting rod and crankshaft damage. The engine was deemed non-repairable and requires full replacement. The Pilot has been properly maintained, with the most recent oil change performed on 5/13/2025 and no issues noted. I am the original owner, and the in-service date was late 2015 (among the first redesigned Pilots). This appears to be a critical engine defect that occurs without warning, resulting in catastrophic engine failure and creating a serious safety hazard for drivers and passengers. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
2016 Honda Pilot engine complaints
Page 7 of 29: complaints 161 to 190 of 828, newest first, as owners wrote them.
My Pilot is experiencing a loud knocking noise from the engine, a symptom directly related to the federal safety agency Recall 23V‑751 (Honda's engine connecting rod bearing failure). On 9/8, I took my vehicle to BP Service in Kirkwood, Missouri, for a diagnosis. The technician confirmed that the knocking noise was consistent with an internal engine issue, likely involving the crankshaft and connecting rods. This diagnosis prompted me to investigate the recall. On 9/10, I contacted the Honda dealership in Frontenac, Missouri, specifically mentioning the symptoms and the recall. The dealership service department checked my vehicle's VIN and informed me that it was not included in the official recall list for 23V‑751. Despite my VIN not being on the list, the symptoms of my vehicle match the described defect in the recall. The engine knocking and potential for engine failure pose a serious safety risk. I am concerned that the recall population may be too narrow and that my vehicle's VIN should be included. I have attached a receipt from BP Service regarding their diagnosis and I can have them provide a more detailed report if needed.
My vehicle is experiencing a loud knocking noise from the engine, a symptom directly related to the federal safety agency Recall 23V‑751 (Honda's engine connecting rod bearing failure). On 9/8, I took my vehicle to BP Service in Kirkwood, Missouri, for a diagnosis. The technician confirmed that the knocking noise was consistent with an internal engine issue, likely involving the crankshaft and connecting rods. This diagnosis prompted me to investigate the recall. On 9/10, I contacted the Honda dealership in Frontenac, Missouri, specifically mentioning the symptoms and the recall. The dealership service department checked my vehicle's VIN and informed me that it was not included in the official recall list for 23V‑751. Despite my VIN not being on the list, the symptoms of my vehicle match the described defect in the recall. The engine knocking and potential for engine failure pose a serious safety risk. I am concerned that the recall population may be too narrow and that my vehicle's VIN should be included. I've attached a receipt from BP Service regarding their diagnosis if more detail is needed, I can have them write a full report.
I was driving my 2016 honda pilot home. Started from a red light, heard some grinding and then a loud bang and had no power to move. I coasted to the side of the road and had it towed as I restarted it to hear a loud grinding. Local mechanic said to take to the dealership because I threw a rod and the cylinder seized up. Honda confirmed this and then replaced my engine with a used one. 2 years later I discovered other pilots had this happen after mine did and recalls were put out but my VIN isn't on the list and honda refused to reimburse me for the engine. Im out 8 grand for a problem that they know about with my same year and model vehicle but because I'm not on the list, im out of luck.
While driving, the engine suddenly seized without warning. The vehicle lost power and could not be restarted, creating a hazardous situation. There were no warning lamps or messages before the failure. The issue has been confirmed by the dealership service center, which diagnosed a seized engine. They indicated that the next step would be a complete engine teardown to determine the cause, at significant cost. The component (engine) is available for inspection. To my knowledge, this problem has not been previously addressed or repaired, and it appears consistent with rod bearing failures currently under the federal safety agency investigation for this engine family.
The contact owns a 2016 Honda Pilot. The contact stated that while his son was driving 35-40 MPH, the vehicle stalled. There was no warning light illuminated. The driver was able to pull into a parking lot. The vehicle failed to restart and was towed to an independent mechanic, where it was diagnosed and determined that the engine had seized and needed to be replaced. The vehicle was not repaired. The contact related the failure to the federal safety agency Campaign Number: 23V751000 (Engine and Engine Cooling); however, the VIN was not included in the recall. The dealer was contacted and informed the contact that no assistance could be provided because the VIN was not included in the recall. The vehicle was not repaired. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was approximately 139,000.
motor grinding
Transmission slipping and motor making a grind sound since like 120k and dash problems and paint chips every were paint is coming off on its own. I did not about that i can do a complete here.
My vehicle has run 79k miles. The honda pilot started giving knocking noise from the engine on 30-Aug-2025. I somehow brought the vehicle back to my home. Today I took it to a service center which is next to my home. They looked at the vehicle noise and mentioned that the Rod bearing for the Honda is damaged and the engine needs to be replaced. When I looked online, there was a safety recall for Rod bearing for 2016 Honda Pilot. But when I called Honda Corporate, they mentioned that my VIN number is not eligible for recall and I need to replace the rod bearing myself. I will end up spending $10000 for replacing the rod bearing. This seems to be a common issue with 2016 Honda Pilot and Honda is refusing to acknowledge that this is an issue with their manufacturing. This is a very big safety issue as the vehicle can stall when going on the high way causing accidents.
The engine seized while driving on the highway bringing the vehicle to a complete stop. There is currently a recall on 2016 Honda Pilot engines involving premature connecting rod bearing wear. The mechanic that has been servicing this vehicle for the last 9 years stated this is exactly what happened to my vehicle and should be covered under the recall. Honda stated that my vin number was not included in the recall and repairs are my responsibility. The issue here is the engine seizing for a known issue while driving on the highway could have been disastrous. Luckily no accident occurred as a result but Honda should be liable for this.
Engine developed noises while driving and seized up. Prior to engine seizure, auto start/stop was having issues where it would not restart after stopping at a light or stop sign. Rear unibody rusting really badly due to cheap quality metal?
While driving approximately 65 mph on the [XXX], near Terre Haute, Indiana, the engine very suddenly started making a very loud noise without any warning and immediately thereafter every system failed. The check engine light and several other warning lights appeared on the dashboard; the car steering became very stiff, making it very difficult (and dangerous) to control the car and get it safely to the shoulder; and the engine noise became louder (like spoons in a blender). The car unexpectedly lost forward motion causing cars and semi-trucks around us to take evasive action to avoid hitting us. All of this happened without warning and in a matter of a few seconds and we were very lucky to avoid a very severe accident. We had the car towed by Hawks Towing (in Glenview, IL) to Loyola Service (our preferred, trusted automotive service provider). The technicians at Loyola Service diagnosed the car with a complete engine failure and in need of a complete engine replacement. The estimated cost of the repairs is $21,254. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Driving at highway speeds the vehicle began to shudder and make a loud screeching/banging sound. Once shut off it would not start. Mechanic determined the vehicle had no compression on one cylinder and further observed that while the valves did operate, the piston was not moving in the cylinder. The conclusion was the connecting rod had broken. Engine is still sealed and has not been taken apart for inspection. Engine has been replaced at customer expense.
The contact owns a 2016 Honda Pilot. The contact stated that while starting the vehicle, the engine made knocking sounds. The check engine warning light was intermittently illuminated. Additionally, the vehicle was shaking while idling. The vehicle was taken to an independent mechanic, who discovered metal shavings in the engine oil and that the connecting rods had failed. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The contact related the failure to the federal safety agency Action Number: PE25008 (Engine). The manufacturer was made aware of the failure, and a case was filed. The failure mileage was approximately 135,000.
The contact owns a 2016 Honda Pilot. The contact stated that while driving and coming to a complete stop at a stop light, the vehicle inadvertently stalled but was able to restart. After restarting the vehicle, the vehicle returned to normal functionality, but the failure became a regular occurrence. No warning lights were illuminated. The vehicle was taken to the dealer, who diagnosed a failure with the engine. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. After investigating the failure, the contact related the failure to the federal safety agency Campaign Number: 23V751000 (Engine and Engine Cooling), but the VIN was not included. The manufacturer was notified of the failure, a case was opened, and the contact was referred to the federal safety agency Hotline for assistance. The failure mileage was 133,000.
The engine shuts off while driving and the car shifts the transmission to Park or Neutral.
Complete engine failure. Connecting rod bearing completely broke while driving.
Engine Rod defective .. car completely stopped working on highway . Had towed to dealer for $300 and dealer said 8.9k to replace engine. Lots of Honda owners complaints about the same issue We were forced to sell car to Cox auto at a loss as we did not have the money to fix Check car fax. As we had perfect maintenance all done at dealership
There was a small ticking/knocking noise that started the week before I took my Honda Pilot in to the dealer. I took the car in for regular service and told them about this noise. Under further inspection, I was advised by the Honda dealership that the piston connecting rod bearing had failed causing damage to the motor. I had to pay to replace the motor at my own expense. This is a safety issue as I did not really have a warning that anything was wrong with the vehicle and the engine could have seized up and caught fire while I was driving putting my family and other vehicles in harms way. It is my understanding that Honda had a partial recall on this issue in which my VIN was not covered. I was not notified that this was even an issue for the 2016 Honda Pilots and I should have been notified and and this should have been fixed before it occurred. The dealer reached out to Honda Corporate to request coverage of this cost and they denied it even though this is a known issue with this motor.
Driving regular highway speed and lost power with a number 6 engine misfire. Towed vehicle to house and eventually to dealer to investigate.
2016 Honda Pilot EX-L (80k miles) that has been always serviced at Honda dealership for all regular oil changes and all regularly needed service. Very well maintained and low miles. We heard a knocking sound from the front and brought it to Honda for diagnosis and repair. They informed us it’s a “connecting rod bearing” issue with “no signs of external abuse.” This car has been unsafe to drive for 2 months while we worked with Honda to repair this issue and cover the cost of this. They declined to cover the cost of anything since this VIN hasn’t been recalled, while other 2016 Honda Pilots have had the exact same issue and were in the recall list.
Engine started knocking going down highway then shut off imeediatly. Dealer said engine needs replaced due to rod bearings. Dealer also said there was a recall for this exact issue but only certain VIN numbers were included. How can an engine type have the same issue but not be included in the recall?
2017: transmission replacement UW 2021: Vehicle stopped/ lost power on I44 at a speed of 70 mph. I immediately pulled over and called Roper on a recorded line per roper Honda. Took it to roper- needs a new motor. 2021: motor replacement Not UW 2024: vehicle was called in about hatch defect . Apparently, Roper reports that it is fixed yet- it IS NOT. I was unaware of the rods recall. That would explain why I need another motor. 2025: motor is knocking. Not UW 2025: AIS: vehicle has stalled at busy intersections after an idle stop. Scary when you have a car full of kids and your car doesn’t want to go. Now the car will just loose power and not start at a stop light regularly. I paid $43,000 for a vehicle that may have all the bells and whistles but it is complete trash to say the least. I have records of all of the work, issues, and roper has recorded calls that could be supenaded. ROPER HONDA JOPlIN MO
The contact owns a 2016 Honda Pilot. The contact stated that while at a stoplight, the contact attempted to drive forward, and the vehicle lurched forward and then hesitated with several unknown warning lights illuminated. The vehicle was taken to an independent mechanic, where it was diagnosed, and determined that the camshaft position sensor had failed and needed to be replaced. The vehicle was not repaired. The dealer was contacted. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 113,000. The VIN was not available.
While merging onto the highway at about 45 mph the vehicle started to shake, stall, fail to respond and make a horrific noise. This caused a traffic situation as the car would not correctly get up to speed thereby affecting my merge and those behind me. I took the vehicle to my local dealer and upon completing an engine teardown I was advised that the connecting rod bearing had failed. When I asked how this could have happened I was told that I was "unlucky and got a defective part." The dealer quoted me about $18k for a replacement engine and actually discouraged me from proceeding with the repair. The vehicle body, interior and all components are in very satisfactory state and earlier in the year I ran a KBB report to value it. Those reports ranged from $12k - $16k. Ultimately, due to this situation not only were my daughter and I in danger but I lost any value.
Engineer appears to have seized while driving in the mountains. I was able to pull off to the side but the steering and braking was very hard and we were going 55mph with a car full on our way back from camping. I had my family in the car and I’m thankful there wasn’t a disaster that happened due to the failure.
Car staring jerking and engine seized up while i was driving.
We purchased our 2106 Honda Pilot Elite new in 2016. In 2022, I was driving the car and heard a rattling noise after accelerating at a stop light. I took it to Honda and they determined the engine failed and we need a new one. Our engine went out at only 80,000 miles. I experienced other issues with the Pilot; getting stalled at stop lights due to the auto idle engine stop and the start was by far the worst. Honda repaired the start button, but it did not fix the issue. The next time they said my battery was bad, they were wrong because I purchased a new battery a few months prior. The auto tailgate and sunroof worked about 60%. The next thing we did was file a claim with Honda Corporate. Case number ending in 7316 We provided every receipt requested and hand-delivered them to the service manager at Honda Schaumburg. Ultimately our claim was denied.
Driving home on a Thursday evening and experienced engine knocking sound(only heard when pulling into garage) after 30 minute drive of mixed highway and street driving. Shut down car and restarted engine. Engine knocking sound occurs just above normal idle rpm and also when rpm is going back down(deceleration) Advised spouse not to drive car until it is diagnosed. Not ideal due to a family vacation the following week. Drove very slowly to dealer on Sunday evening for a Monday mid day diagnosis appointment. Suv did have a check engine light on ( Thursday) but did go away after sitting over weekend(sunday night drop off) Honda Dealer diagnosed my engine has a damaged connecting rod bearing on cylinder #6. The dealer then proceeded to quote around $12,000 USD to replace the engine with a used engine with 115,000 miles on it already. The quote also has individual cost to replace the timing belt, water pump, coolant, hydraulic tensioner on the used motor. My vehicle has 141,000 miles. I estimate the value of the car to be around $12-14k. I am an ASE Master Certified Technician who at one point did work for a Honda Dealer. I am very familiar and comfortable with the manufacturer. I have owned 7 Honda/Acura vehicles over my lifetime. I have meticulously cared for this vehicle as I am now older with a family (3 kids)that relies on this SUV. Never once has the oil life reminder been below 10%. Honda brand Transmission fluid, Front axle fluid, Rear diff fluid (purchased from Honda)x2 and of course all oil changes done by me. I am a believer in not trusting anyone putting any brand oil/fluids in your vehicle. Vehicle has not seen anything else besides Mobil-1 full synthetic and Honda brand filters. This combo has served me well in my 6 other Honda/ Acura vehicles. With all that being said, I strongly believe this Pilot should be included in the connecting rod bearing recall that is currently affecting other 2016 model year Pilots. My VIN is not included.
The contact owns a 2016 Honda Pilot. The contact stated that while driving at 40 MPH, there was an abnormal rattling sound coming from the engine. The contact was unsure if the check engine warning light was illuminated. The vehicle was towed to the dealer, where it was diagnosed that the rod bearings had failed, causing catastrophic damage to the engine. In addition, there were metal shavings inside the engine oil. The contact was informed that the engine needed to be replaced. The vehicle was not repaired due to the cost. The vehicle remained at the dealer unrepaired. Upon further investigation, the contact related the failure to the federal safety agency Campaign Number: 23V751000 (Engine and Engine Cooling); however, the VIN was not included. The manufacturer was informed of the failure and referred contact to the federal safety agency Hotline to report the failure. The failure mileage was unknown.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2016 Honda Pilot?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history