Check a VIN

1997 International Harvester 4700 problems

The most common problem on the 1997 International Harvester 4700 is steering. It has 1.9 times the complaints of a typical 4700 model year.

Typical year1.9x the typical complaints
Owner complaints
13
Recalls
4
Service bulletins
1
Worst area
Steering

The worst 1997 International Harvester 4700 problems

Ranked by number of owner complaints. Mileage and cost come from what owners wrote.

  • Steering
    5
  • Acceleration
    3
  • Brakes
    2
  • Engine
    2
  • Visibility
    2

Problems by type

Tap a problem to see which part fails, at what mileage and in which other years.

  • Steering
    5
  • Acceleration
    3
  • Brakes
    2
  • Engine
    2
  • Visibility
    2
  • Fuel system
    1
  • Tires
    1
  • Transmission
    1

Recalls 4

SeatsReported March 6, 2003 · 2,418 vehicles affected
What is wrong
On certain heavy duty trucks equipped with bostrom driver seat models 910, 910sc, or 914 and international's parking brake code 04036, if someone outside the cab adjusts/slides the driver's seat to its most forward position, with the parking brake set, the seat will contact and release the parking brake lever.
Risk
If the parking brake is accidentally released, the vehicle could move unexpectedly, increasing the risk of a crash.
Remedy
Dealers will install a stop-bracket on the seat track to limit the travel of the seat so that the seat cannot release the parking brake lever. Owner notification began on march 31, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1‑800‑448‑7825.

Recall number 03V083000 · Recall details

Suspension: rearReported November 27, 1996 · 233 vehicles affected
What is wrong
Vehicle description: school buses and heavy duty trucks equipped with rear axle assemblies produced by dana spicer. Certain rear axle assemblies were improperly heat treated which could allow pinion breakage at the pinion threads.
Risk
Cracks can initiate and result in separation of the threaded end of the pinion resulting in separation of the yoke and drive line from the rear axle increasing the risk of a vehicle accident.
Remedy
Dealers will replace the rear axle carrier/pinion assembly.

Recall number 96V240000 · Recall details

Suspension: rearReported November 22, 1996 · 1,133 vehicles affected
What is wrong
The drive axle housings consist of a plate steel center section and two forged spindles, one of which is welded to each end of the center section. Each spindle contains a keyway slot in which the locking tab for the wheel bearing nut locking mechanism is inserted. The length of the keyway slot may not be long enough to accommodate the tab causing the tab to be deformed or damaged during installation.
Risk
This locking tab prevents the wheel bearing nut from loosening during vehicle operation. If this tab is deformed, the nut can loosen allowing the wheel to separate from the axle increasing the risk of a vehicle accident.
Remedy
Dealers will replace the drive axle housing nuts with a conventional wheel nut hardware system.

Recall number 96V233002 · Recall details

Steering: steering wheel/handle barReported August 20, 1996 · 215 vehicles affected
What is wrong
The steering column used was incorrectly manufactured. The tube portion of the steering column has a welded end with a specified length of 5.5 inches. A 3.5 inch welded end was used by mistake. With the shorter end, it is possible there is insufficient engagement of the male end into the tube portion and separation of the column could occur.
Risk
Should the column separate, the operator would lose steering control increasing the potential for a vehicle accident.
Remedy
Dealers will replace the incorrectly built steering column with a new correctly built steering column.

Recall number 96V154000 · Recall details

See all 4 recalls for the 1997 International Harvester 4700

Technical service bulletins for the 1997 International Harvester 4700 1

Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.

What 1997 International Harvester 4700 owners say

Most recent owner complaints, unedited.

Filed Jul 22, 2002 · Steering · MI

Parts are not available for for steering recall 99v033001 repairs. *ak consumer adds manufacturer (spicer) has not sent the parts to replace the defective tie rod ends.

Filed Apr 1, 2002 · Steering · MI

Dealer: wise international; south bend. In; phone number# 219/288-9929 was unable to honor manufacturer's recall because no parts were available. Feel free to provide any further information.

Filed Jan 31, 2002 · Steering · FL

Consumer states that tie rods parts ordered for safety recall notice #99501, to date have not been received, resulting in repairs not yet performed.

Filed Feb 5, 2001 · Steering · NY

Consumer received recall notice. Dealer stated they would let consumer know when parts came in for tie rod recall repairs. *ak the dealer was not able to correct the recall problem.

Filed Apr 6, 2000 · Transmission · MS

Been waiting for dealer to call back to honor recall 96v233.002/ trans axle housing. Everytime consumer called, the dealer claimed that parts were not available or parts have not arrived.

Filed Feb 10, 2000 · Brakes · WV

Parking brake handle broke, causing the vehicle to roll. Dealer has been notified. Parking brake assembly has been replaced.

Filed Jan 27, 2000 · Tires · TX

Dealer does not have parts available. Consumer received two recall letters over the last 90 days, parts still are not available.

Filed Sep 29, 1999 · Steering · NC

At any speed the vehicle darts to the left or right due to loose steering. Dealer cant find the cause after several visits.

Filed Jun 29, 1998 · Brakes · CA

Tow truck: jell forming very thickly on master cylinder hydraulic brakes. Silicone in system should be light. Brakes not releasing. Vehicle does not compress. Reg. Rep. Saw jell thickness & said normal. Brakes make funny noises when applied. Received bulletin from bendix about brakes.

Filed Jan 27, 1997 · Fuel system · CA

Fuel flows back and forth between tanks, especially on slanted r0ads/when parked on curb.

Compare the 1997 International Harvester 4700

Other model years

199319941995199619971998199920002001

Questions about the 1997 International Harvester 4700

Is the 1997 International Harvester 4700 reliable?

Owners have filed 13 complaints about the 1997 International Harvester 4700, 1.9 times a typical 4700 model year.

What is the most common problem with the 1997 International Harvester 4700?

Steering, with 5 complaints. Next is acceleration (3).

How many recalls does the 1997 International Harvester 4700 have?

4 recalls, covering seats, suspension and steering.

Was there a recall on the 1997 International Harvester 4700 steering?

Yes, 1 recall: 96V154000. Check your VIN to see if your car still needs the free repair.

Share your experience with the 1997 International Harvester 4700

Tell other buyers what went wrong and what it cost. We review every report before it appears, and we never publish names, emails or VINs.

No names, contact details or links. Reports about a dealer or a person are not published.

VIN decoder

See the problems and recalls for an exact car

Buying a used 1997 International Harvester 4700?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history
Is this car on a recall?Check VIN