The gauges and speedometer quit working on the dash of the 2001 international model 4700. So far there have been no consequences but I have been hearing that it is a hazardous occurence because of the possibility of a fire in the dashboard. Talking to other owners of international trucks they have all experienced the same thing, one with a fire occuring.
The worst 2001 International Harvester 4700 problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
- Brakes5
- Acceleration1
- Body1
- Electrical1
- Suspension1
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
- Brakes5
- Acceleration1
- Body1
- Electrical1
- Suspension1
Recalls 4
Service brakes, air: antilock: wheel speed sensor
- What is wrong
- On certain school buses and truck model vehicles manufactured between february 28, 1999, through april 5, 2004, the anti-lock brake system electronic control unit (ecu) may misinterpret a corrupt wheel speed signal.
- Risk
- The corrupt wheel speed signals may improperly activate the ABS, instead of deactivating the ABS. This may result in the driver experiencing a hard pedal feel and a decrease in deceleration at the end of the stop, resulting in extended stopping distances which could cause a vehicle crash, possibly resulting in property damage, personal injury, or death.
- Remedy
- International will notify its customers and inspect and repair the affected vehicles free of charge. The recall began august 1, 2004. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international customer service at 1‑800‑327‑4236.
Recall number 04V269000 · Recall details
Service brakes, air
- What is wrong
- On certain heavy duty trucks, a brass fitting connects the double check valve to the brake relay valve. With certain inputs to the vehicle, the weight of the check valve on the fitting can cause the assembly to resonate. The subject vibration can cause excessive strain levels in the fitting, which could eventually fatigue and fail.
- Risk
- If the fitting breaks, the rear service brakes will cease to operate without warning, resulting in an extended stopping distance, increasing the risk of a crash.
- Remedy
- Dealers will install a kit to remount the double check valve with a flexible hose on the majority of vehicles. On a small number of units with clearance issues or traction control, a kit with a new relay valve that has a built-in double check valve will be installed. Owner notification began on april 18, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1‑800‑448‑7825.
Recall number 03V137000 · Recall details
Service brakes, air: supply: check valve
- What is wrong
- On certain medium and heavy duty trucks, a brass fitting connects the double check valve to the brake relay valve. With certain inputs to the vehicle, the weight of the check valve on the fitting can cause the assembly to resonate. The subject vibration can cause excessive strain levels in the fitting, which could eventually fatigue and fail.
- Risk
- If the fitting breaks, the rear service brakes will cease to operate without warning, resulting in an extended stopping distance, increasing the risk of a crash.
- Remedy
- Dealers will install a kit to remount the double check valve with a flexible hose on the majority of vehicles. On a small number of units with clearance issues or traction control, a kit with a new relay valve that has a built-in double check valve will be installed. Owner notification began september 11, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1‑800‑448‑7825.
Recall number 02V135002 · Recall details
Seats
- What is wrong
- Vehicle description: heavy duty trucks equipped with bostrom driver seat models (910, 910sc, or 914) and international's parking brake code 04036. If someone outside the cab adjusts/slides the driver's seat to its most forward position, with the parking brake set, the seat will contact and release the parking brake lever.
- Risk
- If the parking brake is accidentally released, the vehicle could move unexpectedly, increasing the risk of a crash.
- Remedy
- Dealers will install a stop-bracket on the seat track to limit the travel of the seat so that the seat can not release the parking brake lever. Owner notification began april 20, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1‑800‑448‑7825.
Recall number 01V102000 · Recall details
Technical service bulletins for the 2001 International Harvester 4700 1
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
What 2001 International Harvester 4700 owners say
Most recent owner complaints, unedited.
The brakes have been defective since consumer purchased the vehicle. Consumer's vehicle was included in a recall for the same brake problem, but problem recurred. Abs light was still on after being serviced 8 times.
While driving, the ABS warning light illuminated until the vehicle was turned off. Please provide more information.
I own a 2001 international flat bed tow truck,also referred to as a roll back or car carrier.I have had one incident with the the"l"arm bracket that retains the "l"arm for the wheel lift coming off my truck and another incident where the complete hydraulic control panel assembly that goes from one side of the truck to the opposite side, falling down.the equipment was installed by chevron carriers and wreckers,located at 7320 w.market st,mercer,pa,16137.their phone number is 724‑981‑7500 or 800‑886‑6400.I contacted chevron and notified them of the problem with the hydraulic control panel and asked for reimbursement for the repair to which I was refused.I deem these to be safety issues.both problems were caused by the lack of lock washers or spacer washers being installed under the heads of the bolts causing the bolts to loosen up on the " l" arm and the bolts that hold the hydraulic panel in place wore thru the plate underneath causing the bolts to fall through the elongated holes and falling down.it appears at this time that chevron has brushed off my verbal complaints to them.the serial number for reference to chevron for the tow equipment package is 10164820.I was advised by chevron that the vehicle had a one year warranty on it and that they waould not be responsible for the repairs/reimbursement..to which I advised them that it was a manufacturers defect that caused both problems. Thank you for your time in considering this matter. Walter leuci ptl enterprise ptl towing.
Right rear hydraulic brake caliper failed. *mr the right rear brake caliper failed to release properly and resulted in a fire. The consumer was transporting a bulldozer at the time. All rear brakes and calipers were replaced. While transporting a backhoe, the right front caliper failed to release properly and resulted in a near loss of control. The there was an occasion where the axle had broken on the vehicle while in motion. (unexpectedly) the vehicle also accelerated on it's own on several occasions and was repaired twice to correct the problem. *scc
The right rear hydraulic brake caliper failed to release properly, which resulted in a vehicle fire. *mr on the second occasion, the front caliper failed to release properly which almost caused the consumer to lose control of the truck while traveling 55 MPH. *ts *jb *scc
No parts available. Recall #02v135002 brake relay valve. Please provide the name, number, and address of the dealer. Ts
Compare the 2001 International Harvester 4700
Other model years
Questions about the 2001 International Harvester 4700
Is the 2001 International Harvester 4700 reliable?
Owners have filed 7 complaints about the 2001 International Harvester 4700, close to a typical 4700 model year.
What is the most common problem with the 2001 International Harvester 4700?
Brakes, with 5 complaints. Next is acceleration (1).
How many recalls does the 2001 International Harvester 4700 have?
4 recalls, covering service brakes, air and seats.
Was there a recall on the 2001 International Harvester 4700 brakes?
Yes, 3 recalls: 04V269000, 03V137000, 02V135002. Check your VIN to see if your car still needs the free repair.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2001 International Harvester 4700?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history