2002 Jayco Designer problems

What is wrong

Jayco, Inc. (Jayco) is recalling various 2002-2016 recreational vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: These extinguishers may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit:

Risk

In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

Remedy

Jayco will notify owners, instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began on January 15, 2018. Owners may contact Jayco customer service at 1‑800‑283‑8267, or Kidde customer service toll-free at 1‑855‑262‑3540, or online at www.kidde.com and click on "Product Safety Recall" for more information.

Recall number 17V746000 · Recall details

What is wrong

On certain motor homes built on ford chassis, the speed control deactivation switch may overheat.

Risk

Overheating could result in smoke or burning, and in an underhood fire.

Remedy

Ford is conducting this recall (please see 06v286) and will install a fused wiring harness into the speed control system free of charge. Owners may contact ford at 1‑866‑436‑7332 or jayco at 1‑800‑283‑8267.

Recall number 06V320000 · Recall details

What is wrong

On certain travel trailers, due to various factors, including excessive paint coating on the brake hub, the aluminum wheels could exhibit lessened clamping pressure between the aluminum wheel and the axle hub assembly.

Risk

This could lead to wheel separation, which could result in a crash.

Remedy

Dealers will inspect all wheels, lugs, studs and mating surfaces, and remove paint from the mating surfaces of the wheel and hub. The recall began on october 18, 2004. Owners should contact jayco at 1‑219‑825‑5861.

Recall number 04V364000 · Recall details

What is wrong

On certain motor homes equipped with samsung microwave ovens, these units were produced with a defective panel. An electrical short can occur between circuit patterns on the membrane panel, especially overlapped by a "jumper" or jump wire. This may cause the oven to activate without pressing any key pads.

Risk

An electrical short can occur causing the oven to activate without pressing any key pads. This could result in excessive heat, smoke, or possibly a fire.

Remedy

Samsung will notify customers and repair the panel free of charge. In the meantime, consumers should unplug their microwave, if possible. If the consumer is unable to unplug the microwave, they should leave the door ajar until the panel is replaced. Consumers should never use the microwave oven for storage or leave any towels, paper, cloth or other products in the microwave after use. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact samsung at 800‑932‑3837 or jayco at 1‑574‑825‑0608.

Recall number 03V383000 · Recall details

Jayco is conducting campaign 04v‑364 to address 742 vehicles equipped with six lug aluminum wheels.odi is initiating a recall query to further investigate vehicles equipped with eight lug aluminum wheels since these vehicles exhibit a small but persistent rate of wheel separations.

EA04019

In response to odi's june 1, 2004 pe inquiry,jayco advised odi of 58 wheel separation incidents that have occurred in jayco products.three (3) are model year 2002-2003 travel trailersand fifty-five (55) are model year 2001-2004 fifth wheel towable rvs equipped with aluminum wheels.jayco has also advised odi that an additional two (2) wheel separations occurred during june, 2004, for an overall total of sixty. Odi conducted a field inspection of the jayco vehicle that lost a wheel on june 11, 2004.the inspection found evidence of coating material between thehub and wheel mounting faces.foreign material such as coatings in the wheel mounting joint can compromise the ability of the nuts to maintain clamp and lead to nut loosening and/or stud breakage and could result in a wheel separation.a wheel that separates from a vehicle at highway speeds poses a hazard to other users of the roadway and can affect the stability and safety of the affected rv.this pe is being upgraded to an engineering analysis for further investigation.

PE04016