1991 Jeep Cherokee brakes problems

Filed Nov 8, 2022 · Brakes · 175,000 miles · WA

The contact owns a 1991 Jeep Cherokee. The contact stated while driving 20 MPH, the contact depressed the brake pedal however, the vehicle failed to slow as needed. The brake warning light was illuminated. The depressed the brake pedal with extreme force and the vehicle came to a stop. The dealer was contacted but the vehicle was not diagnosed because the vehicle was an older vehicle. The contact was informed that had already been repaired under the federal safety agency Campaign Number: 96V260000 (Service Brakes, Hydraulic). The manufacturer was contacted and stated that the vehicle was imported from Canada, and once it was imported, the vehicle warranty was voided. The failure mileage was 175,000.

Filed Feb 15, 2019 · Brakes · 208,970 miles · CA

Tl* the contact owns a 1991 jeep cherokee. When the contact engaged the brake pedal, it became stiff and had to be depressed several times to stop the vehicle. The contact also had to depress the brake pedal from a greater distance to bring the vehicle to a complete stop. The brake warning indicator remained illuminated. The vehicle was taken to huntington beach chrysler dodge jeep ram (16701 beach blvd, huntington beach, ca 92647, (714) 841-3999) and a pressure test was performed, which found an internal leak at the ABS pump and master cylinder. The dealer stated that the system did not build up over 800 psi and the brake pedal shift interlock system failed. The dealer advised the contact that the vehicle was unsafe and should not be driven. The vehicle was not repaired. The VIN was not available. The failure mileage was 208,970.

Filed Aug 15, 2017 · Brakes · MN

Tl* the contact owns a 1991 jeep cherokee. The contact stated that the vehicle made an abnormal noise and the brake pedal traveled to the floorboard. The contact lost brake functionality while being operated on the highway and the ABS warning indicator illuminated. The contact was able to stop the vehicle. The vehicle was taken to ryan auto mall (located at 1000 highway 55 e, buffalo, mn) where it was diagnosed that the pump motor assembly was defective and needed to be replaced. The contact stated that the vehicle was previously repaired per the federal safety agency campaign number: 96v260000 (service brakes, hydraulic), which stated that the component had a lifetime warranty. The technician refused to do the recall repair due to lack of parts. The manufacturer was made aware of the issue and informed the contact that there was nothing they could do to assist. The failure mileage was not provided.

Filed Apr 21, 2017 · Brakes · CA

Letter from congressman hunter on behalf of constituent regarding ABS brake issues on his 1991 jeep cherokee. *smd the consumer stated the brakes failed and the dealer could not find the pump to repair the ABS brakes. The consumer requested the to have the vehicle repaired or replaced. The consumer referenced recall #96v260000

Filed Dec 23, 2016 · Brakes · HI

Tl* the contact owns a 1991 jeep cherokee. The contact stated that the brakes were slow to respond and failed to function properly. The dealer determined that the vehicle was excluded from the federal safety agency campaign number: 96v260000 (service brakes, hydraulic). The failure recurred. The manufacturer was notified. The failure mileage was not available.

Filed Dec 22, 2016 · Brakes · 195,000 miles · HI

My ABS pump has failed, and chrysler is failing to comply with the federal safety agency recall #96v260000 having to do with the ABS pump. The recall clearly states that "the brake actuator piston assembly and the pump-motor assembly which will have a lifetime coverage". I called the chrysler recall center today, and at 5:01pm pst, sasha told me that there is no warranty on that part, and I was denied help. The federal safety agency recall clearly states otherwise. Trying to find answers on the internet, I have found that other people are experiencing the same issue with chrysler denying and refusing service, because apparently this part can no longer be had. Why is their direct conflict with the stated lifetime coverage on the recall? I also learned that last year chrysler was fined $105 million by the federal safety agency for mishandling recalls. If the federal safety agency allows chrysler to deny this, legal responsibility may fall on both parties, as I will be continuing with legal action.

Filed Jul 18, 2016 · Brakes · 90,000 miles · SD

Tl* the contact owns a 1991 jeep cherokee. After starting the vehicle, the brake and ABS warning indicators illuminated intermittently. The vehicle was taken to the dealer where it was diagnosed that the brake actuator piston assembly would need to be replaced however, the vehicle was not serviced even though the VIN was included in the federal safety agency campaign number: 096v26000 (service brakes, hydraulic). The contact mentioned that he was responsible for the cost of the diagnostic test. In may of 2016, the vehicle was taken back to the dealer a seond time because the ABS pump motor failed to operate. The dealer stated that the part was no longer being produced and the manufacturer would repurchase the vehicle at the fair vehicle price. The manufacturer was notified of the issue. The contact was not interested in the amount ofered per the repurchase program. The approximate failure mileage was 90,000. ...updated 09/19/16 *bf

Filed Jun 16, 2016 · Brakes · 127,000 miles · NJ

Tl* the contact owns a 1991 jeep cherokee. While driving at any speed, the brake pedal became stiff and the ABS light illuminated. The failure was neither diagnosed nor repaired. The manufacturer was not made aware of the failure. The failure mileage was 127,000.

Filed Apr 12, 2016 · Brakes, Electrical · 184,000 miles · CA

Tl* the contact owns a 1991 jeep cherokee. While driving at various speeds and attempting to stop the vehicle, the contact had to depress the brake pedal with extreme pressure to stop the vehicle. When the contact filled the vehicle with brake fluid, the fluid leaked out quicker than anticipated. As a result, the manual braking system had to be used instead of the power assist braking system. The brake warning light illuminated. Also, the horn sounded without warning and the power steering seized. The failure recurred. The contact took the vehicle to a certified mechanic who diagnosed that the power assist brake unit failed and needed to be replaced. The power steering failure was not diagnosed. The vehicle was not repaired. The manufacturer was not made aware of the failures. The approximate failure mileage was 184,000.

Filed Apr 22, 2015 · Brakes · OK

Tl* the contact owns a 1991 jeep cherokee. The contact stated that the brake pedal did not properly release and there was a loose wire connection associated with the braking system near the brake pedal. There were no warning lamps illuminated for the ABS. The contact had to maneuver the pedal and lift the pedal to get it to release. The vehicle was to be taken to an authorized dealer for further inspection and diagnostic testing. The contact stated that there was a manufacturer recall that was not repaired before the vehicle was purchased. The contact was not able to confirm the recall information. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was not available.