On XXX, I brought my 2019 Jeep Grand Cherokee to Elmwood Chrysler Dodge Jeep Ram for the federal safety recall 24V‑838 (FCA 94B) on the ABS module/hydraulic control unit. I picked the vehicle up on the night of XXX with no issues reported by the dealer. On XXX, after running errands and parking in my driveway, I restarted the car and stepped back inside briefly. When I returned, every dashboard warning light was blinking and the vehicle displayed a cascade of false error messages — that it was not in Park, to check the transmission, to check the starter, and to pull over and stop. The vehicle then shut down completely and would not restart. It was completely undrivable. A tow company technician tested the battery on site and confirmed it was fine. The vehicle was towed the following Monday for diagnosis. The entire under-hood fuse box tray (power distribution center) was burnt out and had to be replaced. I paid $600 out of pocket for the repair. The recall remedy required the dealer to work directly on the vehicle's electrical system: the published remedy for recall 94B is to replace the integrated pressure transducer on the ABS module and update the ABS module software — both procedures involving the ABS module's electrical connectors and a powered-up electrical system. My vehicle had no electrical problems before this service. Less than 18 hours after I picked it up from their recall service, the vehicle's entire power distribution system was destroyed. The dealership denied any responsibility and refused to cover the $600 repair. The service manager would not help me — the only person who would speak with me was [XXX], a service advisor. I also reached out to the dealership's ownership. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
2019 Jeep Grand Cherokee: ABS light or ABS activating
48 of the 371 complaints about the 2019 Jeep Grand Cherokee describe ABS light or ABS activating.
- owner complaints
- 48
- of this car's complaints
- 13%
- typical mileage
- 70,000
- recalls
- 2
ABS light or ABS activating by model year
What owners say
The vehicle experienced failure of the Anti-lock Braking System (ABS), including illumination of ABS and traction control warning lights. The failure was confirmed by a dealership, which identified an internal ABS module failure and wheel speed sensor issues. These components are available for inspection upon request. This issue is associated with Safety Recall 94B, which addresses defects within the ABS system. At the time of failure, there was no remedy available under this recall. The failure impacted critical safety systems, including braking stability and traction control, creating a potential safety risk, particularly during braking or adverse driving conditions where ABS functionality is essential. The issue was reproduced and confirmed by an authorized dealership, which replaced the ABS module and related components after diagnostic testing. Prior to failure, warning indicators including ABS and traction control lights were present on the dashboard. A recall remedy for Safety Recall 94B was later released. However, despite the failure involving the same system identified in the recall, the manufacturer has denied that the repair is related, without providing a technical explanation. This raises concern regarding whether similar safety-related failures are being consistently identified and addressed.
I just had a recall repair for my ABS system which was electrical done to my 2019 jeep grand Cherokee. I drove off the lot with it but the next day it wouldn't start, I called the dealership back for an inspection but they stated I would have to pay for a diagnostic. I stated the code that came up when I hooked my OBD scanner up the code for my park, neutral, switch input circuit popped up. I told the dealership numerous times about the code but they are ignoring the code and saying it is my starter and batteries. Mind you I take it to this dealership all the time I never once heard them say I needed any of these things until now. So I told them I need a diagnostic on the electrical issue but once again they are brushing off the circuit code and jumping to the starter but stated I would have to pay $2,319 for a starter and see what comes up, which means spending money for something that is not the problem.
Subject: Vehicle Fire Following ABS Recall Repair – Safety Complaint I am filing a safety complaint regarding a vehicle fire that occurred shortly after a recall repair was performed. Vehicle: Jeep (Grand Cherokee/2019) Mileage at time of incident: Approximate: 58,350 Approximately four weeks ago, my vehicle underwent a recall repair related to the ABS system at Westgate Jeep located in Raleigh, NC 27617. Following that repair, I experienced brake issues due to air in the brake lines, which required a return visit to the same service provider for correction. On April 5, 2026, the vehicle caught fire while parked in my driveway. The fire originated in the front driver-side engine compartment area, where the ABS and brake components are located. The fire caused extensive damage to the engine bay, wiring, and surrounding components, rendering the vehicle inoperable. Given the timing and location of the fire, I am concerned that the recall repair or subsequent brake system work was performed improperly leading to either a brake fluid leak or an electrical malfunction or defective parts that caused the fire. This incident presents a serious safety risk, as it could have resulted in injury or loss of life. I am requesting a full investigation into: - The quality and safety of the recall repair performed - Whether improper installation, damaged components, or fluid leaks contributed to the fire - Whether other vehicles repaired under this recall may be at similar risk The vehicle has not been altered or repaired since the fire and is available for inspection. Supporting documentation (repair invoices, photos, etc.) can be provided upon request. I respectfully request that this matter be reviewed urgently to prevent potential harm to other drivers.
The contact owns a 2019 Jeep Grand Cherokee. The contact stated that the brake light failed to turn off. The service, seat belt, brake, and air bag warning lights were illuminated. The buzzer and lights were making a continuous sound. The local dealer was contacted, and the ABS module was replaced. The dealer informed the contact that there was no recall associated with the VIN or the failure. The vehicle was not repaired. The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 72,000.
The contact owns a 2019 Jeep Grand Cherokee. The contact received notification of the federal safety agency Campaign Number: 24V838000 (Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the ESC and ABS warning lights were illuminated. Additionally, the vehicle unexpectedly shifted out of gear. The dealer was contacted to confirm the recalls. However, due to past experiences, the contact decided not to have the recall repair completed at the dealer. Another dealer, Eastchester Chrysler Jeep Dodge Ram (4007 Boston Rd, Bronx, NY 10466), was contacted; however, the dealer was unable to perform the recall repair because parts were on backorder. The manufacturer was made aware of the issue and confirmed that the part was available for the recall repair; however, the manufacturer was unable to expedite parts to the dealer. The failure mileage was approximately 92,000.
The contact owns a 2019 Jeep Grand Cherokee. The contact stated that upon starting the vehicle, the engine stalled. The ABS and check engine warning lights and other unknown warning lights were illuminated. The vehicle was towed to the dealer, who confirmed that the vehicle was experiencing the failures; however, the official diagnosis information was not provided. The dealer confirmed that the VIN was included in the federal safety agency Campaign Number: 24V838000 (Service Brakes, Hydraulic); however, the vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 150,000.
The HCU/ABS module falsely reads pressure in the primary circuit. The brake lights illuminate when brakes are not depressed, leading to risk of crashes. The car may be shifted in and out of park without depressing the brake, risking rollaway. The ABS is non-functional, a critical safety item standard on most vehicles that prevents crashes. The recall was issued NOV 7th 2024, over a year ago. The dealership states there are no parts available to fix the issue and the recall is listed as incomplete [Part 573 Safety Recall Report 24V‑838]. This is extremely dangerous and unsatisfactory that the manufacturer will not remedy the issue. The warning lamps illuminated indicating this issue are "SERVICE ELECTRONIC STABILITY CONTROL" and the brake lights remain illuminated even when the brakes aren't depressed, including after the vehicle has been turned off. These warning indications first appeared on my vehicle within the last 2 months. The brake light issue started December 2024.
My ESC, ABS, and check engine lights have been on for months due to this recall that has no fix.
The contact owns a 2019 Jeep Grand Cherokee. The contact received notification of the federal safety agency Campaign Number: 24V838000 (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that while operating the vehicle, the electronic stability control, brake lights, and ABS warning light were illuminated. The vehicle was not repaired. The failure mileage was 22,000.
The contact owns a 2019 Jeep Grand Cherokee. The contact stated that the ABS warning light was illuminated. The contact received notification of the federal safety agency Campaign Number: 24V838000 (Service Brakes, Hydraulic). The local dealer was contacted and confirmed that parts were not yet available. The vehicle was not diagnosed or repaired. The manufacturer was contacted. The failure mileage was approximately 169,000.
Electronic stability control light was on as well as check engine. Was advised by service dept at dealership as well as manufacture to the remedy was to replace the abs module until there was a proper solution to the recall and I would have to pay and submit reimbursement ti manufacturer. Had abs module replaced and am now being told I cannot be reimbursed until there is a solution for the recall. Vehicle was not safe to operate with no abs or electronic stability control.
Service bulletins that may apply
- CEL (Check Engine Lamp) Illuminates, Recent PCM Replace or Flash Update Performed, Diagnostic Trouble...
- Decreased Remote Start And RKE Range
- Module, Anti-lock brake system / Hydraulic Control Unit Some 2018-19 WD/WK vehicles have the brake lights...
- Front Click Noise at Low Speed Turns
- Malfunction Indicator Lamp (MIL) Illumination
- Head unit button stuck DTC code B14DA-2A
- Customer may complain of a MIL lamp on. Upon further investigation there could be a fault code in the PCM...
- (Rev. B) Malfunction Indicator Lamp (MIL) Illumination
Related recalls
Service brakes, hydraulic: antilock/traction control/electronic limited slip: control unit/module
- What is wrong
- Chrysler (FCA US, LLC) is recalling certain 2018-2019 Jeep Grand Cherokee and Dodge Durango vehicles. A malfunction in the antilock-brake system (ABS) module may incorrectly illuminate the brake lights and disable the ABS and electronic stability control (ESC). In addition, the vehicle operator may be able to start and shift out of Park without the brake pedal being applied.
- Risk
- A vehicle that can be started and shifted out of Park without applying the brake pedal can result in a vehicle rollaway. Disabled ABS and ESC systems can reduce vehicle handling and control in certain driving situations. Brake lights that incorrectly illuminate can fail to properly indicate the driver's intention to following traffic. Any of these scenarios can increase the risk of a crash.
- Remedy
- Dealers will replace the integrated pressure transducer and update the ABS module software, as necessary free of charge. Owner notification letters were mailed December 16, 2025. Owners may contact FCA customer service at 1‑800‑853‑1403. FCA's number for this recall is 94B. This recall replaces previous recall number 22V‑426. Vehicles previously remedied under 22V‑426 will need to have the new remedy completed.
Recall number 24V838000 · Recall details
Service brakes, hydraulic: antilock/traction control/electronic limited slip: control unit/module
- What is wrong
- Chrysler (FCA US, LLC) is recalling certain 2018-2019 Jeep Grand Cherokee and Dodge Durango vehicles. A malfunction in the antilock-brake system (ABS) module may illuminate the brake lights, and allow the vehicle to start and shift out of Park without the brake pedal being applied.
- Risk
- A vehicle that starts and shifts out of Park without applying the brake pedal can result in vehicle rollaway, increasing the risk of a crash without prior warning and/or injury to others outside of the vehicle.
- Remedy
- This recall is replaced by the federal safety agency recall number 24V838. Vehicles already repaired under this recall will need to have the new remedy completed. The remedy includes updated HCU/ABS module software that prevents the HCU/ABS module from falsely reading pressure in the primary circuit. FCA has decided to do a two-Phase Campaign remedy schedule. Phase 1 began November 17, 2022. Phase 2 begin date has not been determined yet. Interim owner notification letters explaining the safety risk were mailed July 28, 2020. Owner notification letters were mailed on November 29, 2022. Owners may contact FCA US, LLC customer service at 1‑800‑853‑1403. FCA US, LLC's number for this recall is Z48.
Recall number 22V426000 · Recall details
Questions about the 2019 Jeep Grand Cherokee abs
Is ABS light or ABS activating a common problem on the 2019 Jeep Grand Cherokee?
48 of 371 owner complaints about the 2019 Jeep Grand Cherokee (13%) mention ABS light or ABS activating. The model year with the most reports is 2019.
Is there a recall or service bulletin for this on the 2019 Jeep Grand Cherokee?
There are 2 recalls and 11 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 2019 Jeep Grand Cherokee
Check engine light 46Stalling 30Backup camera 15Loss of power 14Jerking 13Overheating 11No deployment 9Engine failure 9Warning lights 8Adaptive cruise 7Headlights 7Misfire 7Start-stop 7Won't start 7Grinding brakes 5Knocking 5Harsh shifting 5Screen failure 5
VIN decoder
See the problems and recalls for an exact car
Buying a used 2019 Jeep Grand Cherokee?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history