2005 Jeep Liberty suspension problems

What is wrong

Chrysler (FCA US LLC) is recalling certain 2004-2007 Jeep Liberty vehicles. The rear suspension lower control arms can fracture due to excessive corrosion, causing a loss of vehicle control.

Risk

A fractured control arm can cause a loss of vehicle control, increasing the risk of a crash.

Remedy

Chrysler will notify owners, and dealers will replace the rear lower control arms, free of charge. The recall began June 26, 2018. Owners may contact Chrysler customer service at 1‑800‑853‑1403. Chrysler's number for this recall is U38. Note: This recall is an expansion of recall 12V‑085. Vehicles included in that campaign are not included in this recall.

Recall number 18V278000 · Recall details

What is wrong

In june 2012, chrysler expanded this recall to include model year 2006 and 2007 jeep liberty vehicles, representing an additional 137,176 vehicles. This recall now concerns certain my 2004-2007 jeep liberty vehicles. The total number vehicles being recalled is now 346,900. These vehicles were manufactured from july 3, 2003 through june 29, 2007. The recall addresses those vehicles originally sold, or currently registered in, connecticut, delaware, illinois, indiana, iowa, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin, and the district of columbia. Some vehicles may be equipped with rear lower control arms that can experience a rear suspension lower control arm fracture due to excessive corrosion due to application of road salts during winter weather conditions.

Risk

A fracture of the rear lower control arm may result in a loss of vehicle control and may lead to a vehicle crash.

Remedy

Chrysler will notify owners, and dealers will replace the rear lower control arms on all affected vehicles originally sold in, or currently registered in, connecticut, delaware, illinois, indiana, iowa, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin, and the district of columbia, free of charge. The safety recall began on march 26, 2012. Owners may contact chrysler at 1‑800‑853‑1403.

Recall number 12V085000 · Recall details

What is wrong

On certain trucks, the constant tension front lower ball joints may experience contamination. If the vehicle is operated for an extended period with this condition, the ball joint may eventually experience wear and looseness.

Risk

When the driver continues to operate the vehicle with this condition, the contamination can lead to corrosion, accelerated wear and possibly separation from the steering knuckle causing a loss of vehicle steering control increasing the risk of a crash.

Remedy

Dealers will replace the front lower ball joints free of charge. The recall began on september 11, 2006. Owners should contact daimlerchrysler at 1‑800‑853‑1403.

Recall number 06V288000 · Recall details

In a letter dated March 2, 2012 Chrysler Group LLC (Chrysler) submitted a Defect Information Report (the federal safety agency recall No. 12V‑085) to the federal safety agency identifying a safety defect regarding rear suspension lower control arm corrosion in approximately 210,000 model year (MY) 2004 and 2005 Jeep Liberty vehicles, originally sold or currently registered in a Salt-belt state (Connecticut, Delaware, Iowa, Illinois, Indiana, Kentucky, Massachusetts, Maine, Maryland, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia).According to Chrysler, excessive corrosion could result in fracture of a rear suspension lower control arm which may result in a loss vehicle control.In analysis of both Vehicle Owner Questionnaire (VOQ) data submitted to the Office of Defects Investigation (ODI) and consumer complaint data submitted to Chrysler, ODI identified 54 non-duplicative reports alleging failure of one or both rear lower control arms due to excessive corrosion.Thirteen of these complaints allege that the failure resulted in some loss of vehicle control.For purposes of this analysis, loss of control events involve alleged complete or partial departure from the intended lane of travel.An additional 11 complaints reported difficulty maintaining control of the vehicle when the rear lower control arm failed.All of the complainant vehicles were either originally sold or registered at the time of the incident in a Salt-belt state.ODI did not identify any reports (complaints or warranty claims) related to rear lower control failure due to excessive corrosion in the approximately 138,000 MY 2004 and 2005 Liberty vehicles that are not included in this recall (i.e., not sold or currently registered in a Salt-belt state).In Chrysler?s Defect Information Report, Chrysler stated that during the investigation a field survey of MY 2004 and 2005 Jeep Liberty vehicles was conducted.In total, Chrysler is aware of 83 incidents alleging rear control arm fracture (including complaints and field study results).Based on Chrysler?s decision to conduct a safety recall this investigation is closed. The associated VOQs are: 10449912, 10448981, 10448406, 10448119, 10447069,10446737, 10445029, 10443863, 10443222, 10441248, 10438681, 10437308, 10436416, 10436231, 10436024, 10434927, 10434157, 10433963, 10430852, 10429346, 10428006, 10427087, 10426644, 10426393, 10419094, 10417697, 10416623, 10410148, 10409668, 10402048, 10397413, 10392160, 10388448, 10365118, 10360057, 10360049, 10345985

EA11013

During Preliminary Evaluation (PE11-013), the Office of Defects Investigation (ODI) conducted an analysis of consumer field data from its Vehicle Owner Questionnaire (VOQ) database and from complaint data submitted to ODI by Chrysler. ODI's analysis of VOQ data identified 13 complaints alleging failure of either the right or left rear lower control arm due to excessive corrosion.All of these complaints were associated with vehicles originally sold or registered in a salt belt state (for the purposes of this investigation, 'salt belt' includes Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia).All of the complaints were associated with vehicles manufactured in model years (MY) 2004 or 2005. Three of these complaints also allege a loss of vehicle control due to the rear lower control arm failure. No complaints related to the alleged defect were identified on vehicles manufactured during MYs 2002 or 2003. Similarly an analysis of Chrysler complaint data identified 11 complaints (2 of which are duplicative of VOQs) alleging failure of a rear lower control arm due to excessive corrosion.All 11 of these complaints were from consumers operating vehicles in a salt belt state and vehicles manufactured in either MY 2004 or 2005. Three of these complaints (not duplicative of VOQs) also allege a loss of vehicle control due to the rear lower control arm failure.The original scope of PE11-013 included MY 2002 through 2005 Jeep Liberty vehicles as they were in the same generation.In response to an Information Request (IR) letter sent by ODI, Chrysler provided information and sample components identifying a substantial design change of the rear lower control arms after MY 2003 and beginning with MY 2004.Analysis of complaint data from both data sources (ODI and Chrysler) did not identify any applicable complaints (lower control arm failures due to excessive corrosion) from vehicles manufactured during MY 2002 or 2003.Similarly no complaints from either data source were found in states outside of those identified as salt belt states.Chrysler stated in its IR letter response that its investigation and analysis is ongoing to determine the scope, possible root causes of the unusual lower control arm corrosion, and define possible consequences to motor vehicle safety. Based on ODI's data analysis from both sources (ODI and Chrysler data), this investigation has been upgraded to an Engineering Analysis (EA11-013) focused on vehicles originally sold or registered in a salt belt state and produced during MY 2004 and 2005, to further assess the scope and potential safety consequences of the alleged defect.

PE11013

On january 6, 2006, the office of defects investigation (odi) opened a preliminary evaluation to investigate alleged front suspension lower ball joint separationin certain model year (my) 2004 jeep liberty vehicles.odi sent a letter to the manufacturer on february 7, 2006 requesting information about these and other jeep liberty vehicles.consequently, the investigation was upgraded to an engineering analysis on may 31, 2006 and the range of subject vehicles under investigation was expanded to include all my 2002-2006 jeep liberty vehicles.odi is aware of 566 non-duplicative complaints alleging involuntary front suspension lower ball joint separation in the subject vehicles.odi is also aware of one non-injury crash and three alleged injury incidents (two crash incidents and one non-crash incident) related to the alleged defect resulting in minor injuries.the complaint counts reported above only include those my 2002-03 liberty vehicles where the alleged ball joint separation occurred after prior recall repairs were performed (see below) or if the vehicle was not included in the prior recall.the manufacturer conducted a prior safety recall (03v‑460) to address the subject issue in certain my 2002-03 jeep liberty vehicles.according to daimlerchrysler?s november 4, 2003, defect information report (submitted in accordance with 49 cfr part 573), ?the constant tension lower control arm ball joints may experience a loss of lubrication which can lead to corrosion, accelerated wear and possibly separation from the steering knuckle.a constant tension ball joint which has separated from the knuckle may result in loss of vehicle directional control with minimal advanced warning.?however, evidence indicates that some vehicles serviced under recall 03v‑460 continued to experience involuntary ball joint separations.the manufacturer has made numerous changes in the design, material composition, manufacture, quality control, supply, and installation of the subject ball joints since the prior safety recall was initiated in an effort to improve performance with respect to sealing, lubrication, and joint retention capability.by letter dated august 1, 2006, daimlerchrysler corporation has notified the agency that it will conduct a safety recall to address potentially defective front suspension lower control arm ball joints in approximately 826,687 model year 2002-2006 jeep liberty vehicles manufactured between january 2, 2001 and march 15, 2006, includingall vehicles subject to the prior recall.the federal safety agency campaign number assigned to this recall is 06v‑288 (daimlerchrysler recall campaign f23).daimlerchrysler will replace both left and right front suspension lower control arm ball joints with improved components free of charge.accordingly, this investigation is closed.

EA06008