My vehicle has experienced a complete failure of the ABS Control Module. A dealer diagnosis confirmed internal module failure. The symptoms are: - All ABS system warning lights illuminated (ABS, traction control, brake, sway bar) - Odometer and speedometer stop working while driving - All brake lights remain on continuously - Vehicle exhibits erratic shifting / rough braking This is a documented safety defect affecting many Chrysler/Dodge/Jeep owners where the dealer confirms the ABS module is defective but cannot repair due to the part being on national backorder with no ETA. I am being told the part is backordered indefinitely. I am left driving an unsafe vehicle with no functioning ABS, stability control, or accurate speed/odometer reading, or parking a vehicle I am still paying for and insuring. I am formally requesting: 1. Immediate provision of a replacement ABS module, or a loaner/rental vehicle at FCA's expense until repair
2010 Jeep Wrangler: ABS light or ABS activating
16 of the 686 complaints about the 2010 Jeep Wrangler describe ABS light or ABS activating.
- owner complaints
- 16
- of this car's complaints
- 2%
- typical mileage
- 49,000
- recalls
- 2
ABS light or ABS activating by model year
What owners say
Most of the dash lights are on scan code U1412. Says traction control not working, ABS not working, speedometer not working, and airbags not working. The Power Control Module (PCM) needs replaced. A known issue with the Jeep Wrangler JKs. No one stocks the parts and used ones are way over priced. How can Jeep not have to replace it or at least stock a replacement part that has the issues resolved?
Abs module failed the company no longer makes the chips to repair this module
ABS Module fails with C2200 code. No replacement parts are available, hence driving with no ABS (manual brakes). Jeep needs to address the nationwide backlog on ATS moudles so proper repairs can be made and Jeep owners have the peace of mind that the ABS is functioning properly.
ABS Module failure. Unable to get replacement. Manufacturer refuses to provide & unable to use used ones due to being programed to Vin#. It has been over 2 years and no resolution in site.
Faulty abs module. Dealer is unable to get part to fix. Car is dangerous to be driven with issue.
ABS failing. Loss of Traction Control & Possible Brake Failure. Vehicle Manufacturer failing to provide parts.
ABS, Traction Control, & Brake warning lights have come on due to issues with the ABS Sensors. Repairs unavailable due to unavailability of parts.
The ABS control module is reporting a DTC code C2200 indicating an ABS module internal failure. The instrument panel warning lights for esp, bas, abs and the traction control are all continuously lit. This problem is continuous but has not been confirmed or inspected by a dealer. independent service center, police or insurance representatives. It is, however, a well known issue reported on Jeep owner forums as an ABS Dashboard Christmas Tree. I have not yet had an ABS related accident but it is extremely concerning that there is an internal ABS module failure that could cause an accident. I have attempted to replace the ABS Module, part 68067458AA, but I am told this part is not available due to a hold for engineering review. I was told the engineering review should be completed by March 20 but until then I am unable to obtain a new replacement part.
Code C2116 - ABS Pump Motor Supply low. This error code has been occurring for the past year. I have no ABS brake function, no air bag function, and no traction control function. The part from Jeep Chrysler, ABS Module, has been on back order for 1 year. I believe it is dangerous for me to be driving this vehicle. One year on back order, please do something and help.
All the break lights came on at one time (esp, bas, ABS) and the traction control will not go off. I was slowing down at a stop sign in a school parking lot. No rain or other weather events occured, on dry pavement
First, I was driving on the highway and hit the brakes, when the vehicle locked all the brakes completely, the vehicle started skidding almost causing an accident because I lost control of the vehicle. A few weeks later, I was driving up the hill when all the dash lights lighted up, I stopped the vehicle and turned it off but they did not went off . I went to the dealer and they told to replace the ABS module (68067458aa) costing $215.00 plus $160 on labor. They also told me that a few customers are complaining about the same issue. The vehicle is also turning off the headlights at night. Right know the problem is intermittent. The check engine code is b162f, right low beam control. According to the dealer, the tipm needs to be replaced, it cost around $400. When I looked in the internet, there are several cases of that issue since 2010.it creates a possible hazard driving at night.
Service bulletins that may apply
Related recalls
Service brakes, hydraulic: foundation components: master cylinder
- What is wrong
- Chrysler is recalling certain model year 2010 left hand drive jeep liberty, dodge nitro and ram 1500 truck; right and left hand drive jeep wrangler vehicles. These vehicles may have been built with an improperly formed master cylinder to hydraulic control unit (hcu) brake tube assembly end flare.
- Risk
- This could lead to loss of brake fluid and reduced braking performance increasing the risk of a crash.
- Remedy
- Dealers will replace the brake tubes free of charge. The safety recall is expected to begin during august 2010. Owners may contact chrysler toll-free at 1‑800‑853‑1403.
Recall number 10V315000 · Recall details
Service brakes, hydraulic
- What is wrong
- Chrysler is recalling certain model year 2007 through 2010 jeep wrangler left and right hand drive passenger vehicles manufactured from may 15, 2006 through april 22, 2010. There may be contact between the right and left front inner fender liners and the right front and left rear brake tubes which could cause wear of the tubes causing a brake fluid leak.
- Risk
- A brake fluid leak can cause partial loss of service brakes at the affected wheel increasing the risk of a crash.
- Remedy
- Chrysler will notify owners and dealers will repair the vehicles free of charge. Owners may contact chrysler toll-free at 1‑800‑853‑1403.
Recall number 10V236000 · Recall details
Questions about the 2010 Jeep Wrangler abs
Is ABS light or ABS activating a common problem on the 2010 Jeep Wrangler?
16 of 686 owner complaints about the 2010 Jeep Wrangler (2%) mention ABS light or ABS activating. The model year with the most reports is 2015.
Is there a recall or service bulletin for this on the 2010 Jeep Wrangler?
There are 2 recalls and 5 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 2010 Jeep Wrangler
Airbag light 88Fire or smoke 32Headlights 28Stalling 17Check engine light 16Wipers 16Won't start 9Adaptive cruise 8Ball joint 8Brake failure 7Engine failure 7Loss of power 7Fuel pump 6Power steering loss 6Tire blowout 6Grinding brakes 5Fuel smell 5Overheating 5Warning lights 5
VIN decoder
See the problems and recalls for an exact car
Buying a used 2010 Jeep Wrangler?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history