I have a blank instrument cluster, my lights are on and wipers run constantly. No warning before this happened. I cannot turn wipers off or control lights. No safety at night with no interior lights and not to mention. I cannot know how much fuel I have. I have found from research that many Jeep Wrangler owners have the same issue from reading forums. I can disconnect the negative battery cable and it temporarily resets then reverts to the same problem. I have also checked the multifunction switch as I was told could be causing the issue and this is not the case because the issue is still there when the switch was unplugged. I then checked the instrument cluster . Unplugged and plugged back in with only a momentary reset and then back where I started. This is not safe and very frustrating when I know there are Many people with the same issue.
2010 Jeep Wrangler visibility problems
13 complaints (2% of all complaints for this car). Typical mileage when it fails: 30,000.
- owner complaints
- 13
- of this car's complaints
- 2%
- typical mileage
- 30,000
- crashes
- 0
- recalls
- 0
Which part fails
Owners did not name a specific part.
At what mileage
Complaints by mileage at the time of the problem.
Jeep Wrangler visibility problems in other years
Specific symptoms reported on the 2010 Jeep Wrangler visibility
Phrases found in the owners' own descriptions, so one complaint can mention several symptoms.
Related recalls
No recalls on record for this model year.
What 2010 Jeep Wrangler owners say
Most recent owner complaints, unedited.
The center console gets hot (like worry about a fire hot) , the radio will not work sometimes, sometimes the radio will be on but you can not shut it off or turn the station or anything with it, now the wipers will not shut off, it will not come out of park, random lights come on on the dash and go off, the windows and blinkers do not work. Thank god mine happened while in the parking lot at work and not driving down the highway at 70 MPH heading home as I take 95 home from work. .so many people are complaining on line. Look it up
My 2010 jeep wrangler unlimited has been idling funny for a while. Today my windshield wipers started running without turning them on, the headlight came on high beam without turning them on and my turn signals stopped working. I was just trying to get hime from work. Sometimes the starter sticks & grinds when I try to start it..sometimes the cruise control makes the jeep shake violently like driving on 4 flat tires down the interstate. My husband unhooked the battery today to stop the wipers and it was sparking and the whole fuse control panel was too hot to touch. He done some research and found out it is the tipm and it's been a problem in almost all jeep wranglers, and has been recalled in most that had all my jeeps electrical issues, but has not been recalled in the 2010, even after many customer complaints, glad it didn't catch my jeep on fire. Now I'm worried about parking in my garage as it is part of my house. So now my jeep that only has 74000 miles and cost me 35000 dollars is a fire hazard and can't be parked in its cozy 350000 garage because I don't want to lose my home, jeep and possibly my life. Chrysler really needs to step up and do the right thing after making so much money off of us die hard life long jeep enthusiasts.*dt*dt
Purchased car in sept 2010, have had intermittent heat and defrost problems since the get go. No heat, heat on one side, luke warm heat, no defroster. Been to the dealer and other mechanics and the problem still persists. This seems to be a known problem to chrysler corp as there was a class action lawsuit regarding casting sand clogging the HVAC system. Chrysler refuses to recall theses vehicles and address the problem. The problem persists at start and when the engine is fully warmed up, no discernible change in cabin temp.
Dashboard doesn't illuminate, directional signals don't operate, wipers won't stop. The totally integrated power module (tipm) needs to be replaced as I had this diagnosed by a professional mechanic. And I had the clock spring replaced by a jeep dealer as this didn't correct the existing electrical problem. This problem happened after the jeep was parked overnight in my garage and it happened january 2016.
Codes b162b and b162f... Linked to the tipm. While driving the headlights flicker then turn off. No low beams and no high beams. The headlights remain off and will not turn back on. This problem occurs at night and is dangerous to self and others. Numerous customer complaints.
While driving, the horn stopped working along with the speed control and wipers and directional signals . The airbag light is illuminated. My jeep wrangler has just over 30,000 miles on the odometer.
I was traveling on a cold and icy road and inside was cold due to the heater core being filled with casting sand. I crossed a river and the difference in humidity caused the windshield to fog up and freeze. I was not able to see the road, but managed to stick my head out the window to keep from crashing. I could have been killed. The temp was about 5 outside. I was near grand island nebraska. South of the walmart on south locust street.
Tipm is creating a major safety issue with my 2010 jeep wrangler. On multiple occasions, the headlights fail to work on my vehicle on start up or once the vehicle is in operation. The dealership looked at the jeep and stated the tipm module was bad and needed to be replaced. The part was indefinitely on backorder from jeep, and could not even be replaced if it were under warranty. Driving this vehicle that is under 2 years old and has a major safety issue is unacceptable. This appears to be a wide spread issue for a number of years with the tipm module on jeep / chrysler vehicles. This will happen to someone while driving at night without their knowledge, and create a deadly event. Would like to see chrysler take responsibility for this dangerous situation and correct the issue to protect the safety of the missions of people driving their vehicles.
Tl* the contact owns a 2010 jeep wrangler unlimited. The contact stated that that when using the heat, there was no heat coming from the driver's side vents. The vehicle was taken to the dealer who advised the contact that they would replace the heater core and flush the engine block. The manufacturer was notified and a claim was filed. The failure mileage was 17,800 and the current mileage was 20,000.
Questions about the 2010 Jeep Wrangler visibility
Does the 2010 Jeep Wrangler have visibility problems?
Owners have filed 13 complaints about the visibility of the 2010 Jeep Wrangler, 2% of all its complaints.
At what mileage do 2010 Jeep Wrangler visibility problems start?
The typical (median) mileage in owner complaints is 30,000 miles.
Was there a recall on the 2010 Jeep Wrangler visibility?
There is no recall for this problem on this model year.
What year does the Jeep Wrangler have the most visibility problems?
The Jeep Wrangler model years with the most visibility complaints are 2018 (43 complaints), 2012 (41 complaints) and 2013 (39 complaints).
Other 2010 Jeep Wrangler problems
Fuel system 228Airbags 158Electrical 86Transmission 68Steering 66Engine 53Suspension 42Brakes 41Lights 25Wheels 17Acceleration 16Body 15Driver assistance 11Tires 8Locks 3Seat belts 3Seats 1
VIN decoder
See the problems and recalls for an exact car
Buying a used 2010 Jeep Wrangler?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history