1999 kenworth conventional. Consumer states that while driving he noticed a strange smell coming from the truck consumer pulled over the truck had caught on fire. *mc (ohio traffic crash report.
The worst 1999 Kenworth T2000 problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
- Brakes1
- Engine1
- Visibility1
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
- Brakes1
- Engine1
- Visibility1
Recalls 8
Suspension: front: hub
- What is wrong
- On certain trucks equipped with truck hub units manufactured by skf exclusively for use on arvinmeritor's ff98x series non-drive steer axles, the hub unit bearings can wear prematurely.
- Risk
- Seizure of the bearings can cause wheel separation or wheel end fire.
- Remedy
- Dealers will replace all front axle hubs. Notification began july 16, 2003. The manufacturer has advised us that parts will not be available until september 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy with a reasonable time should contact peterbilt at 940‑591‑4201 or kenworth 425‑828‑5440.
Recall number 03V125000 · Recall details
Steering: linkages: tie rod assembly
- What is wrong
- Heavy duty trucks equipped with trw tie rod ends on certain arvinmeritor and dana axles. Peterbilt will recall 1,434 vehicles equipped with arvinmeritor axles manufactured from december 11, 1999, to may 14, 2000, and from july 22 to september 30, 2000. Kenworth will recall 859 vehicles equipped with arvinmeritor vehicles manufactured from december 11, 1999, to may 23, 2000, and from july 27, 2000, to september 30, 2000 and kennworth will recall an additional 4,151 vehicles equipped with dana axles and manufactured from june 23 to december 6, 1999, and from may 23 to september 30, 2000. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
- Risk
- This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
- Remedy
- Dealers will remove and replace all affected tie rods and drag links with different designed ends. Owner notification began july 15, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1‑940‑591‑4201 or kenworth at 1‑425‑828‑5440.
Recall number 02V037003 · Recall details
Steering: linkages: tie rod assembly
- What is wrong
- Vehicle description: heavy duty trucks equipped with trw tie rod ends on certain meritor axles. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
- Risk
- This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
- Remedy
- Dealers will remove and replace all affected tie rods and drag links with different designed ends. Owner notification began october 24, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1‑940‑591‑4000 or kenworth at 1‑425‑828‑5000.
Recall number 01V140006 · Recall details
Steering: linkages: tie rod assembly
- What is wrong
- Vehicle description: heavy duty trucks equipped with tie rod assemblies manufactured by trw. The suspect tie rods contain 24-dl model ball sockets. Certain of the tie rod ball-socket bearings have a below-specification case depth and/or hardness, which can lead to premature wear of the socket.
- Risk
- If this condition occurs, the driver can lose partial control of the right front wheel, possibly resulting in a crash.
- Remedy
- Dealers will replace the defective ball sockets and/or drag links. Owner notification began on april 10, 2001, to kenworth owners and on april 25, 2001, to peterbilt owners. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1‑425‑828‑5000, peterbilt at 1‑940‑591‑4000 or trw customer service at 1‑866‑280‑3287.
Recall number 01V044005 · Recall details
Suspension: front: control arm: lower arm
- What is wrong
- Vehicle description: vehicles equipped with 54" rear axle spacing configuration of the airglide 200 suspension with the service application identified as logger, dump truck, or tanker. The rear suspension is regularly subjected to extreme articulation, resulting in flexing of the joint.
- Risk
- Failure of the lower sway arm attaching bolts could result in loss of vehicle control.
- Remedy
- Dealers will replace the lower sway arm brackets. Owner notification began march 27, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1‑425‑828‑5000.
Recall number 01V051000 · Recall details
Steering: linkages: tie rod assembly
- What is wrong
- Vehicle description: heavy duty trucks equipped with trw tie rod ends on certain meritor axles. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
- Risk
- This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
- Remedy
- Dealers will remove and replace all affected tie rods and drag links with different designed ends.
Recall number 00V246102 · Recall details
Service brakes, air: supply: quick release valve
- What is wrong
- Vehicle description: heavy duty trucks equipped with brake valves manufactured by honeywell bendix. The orientation and location of the brake valve is such that water can get into the valve through a vent in the valve. The water will contaminate the air system and could freeze the brake valve.
- Risk
- If frozen, the operator will not be able to modulate the brake forces with the brake pedal.
- Remedy
- Dealers will inspect the air brake system and modifications will be made to the brake valve.
Recall number 00V026000 · Recall details
Electrical system: ignition: module
- What is wrong
- Vehicle description: heavy duty trucks equipped with caterpillar engines and eaton autoshift transmissions. The engines can stall because of software problems.
- Risk
- Increased steering effort can occur.
- Remedy
- Dealers will update these engines with software changes. Caterpillar is conducting the owner notification and remedy of this recall.
Recall number 99V181001 · Recall details
Technical service bulletins for the 1999 Kenworth T2000 6
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- Information Only – Windshield washer pumps have a high No Trouble Found rate
- Information Only:
- Information Only: Proper jump-starting voltage will eliminate high voltage related issues and equipment...
- Information Only:
- Kenworth trucks: reduced engine power from fuel starvation
- Conditions with resume function worksing as set function and set works as resume on cruise control
What 1999 Kenworth T2000 owners say
Most recent owner complaints, unedited.
Vehicle is experiencing problems with the heating ventilation air conditioner, not being able to effectively defrost the windshield while driving, consumer states there is a recall for this problem, however the model or year does not apply to his vehicle.
Compare the 1999 Kenworth T2000
Other model years
Questions about the 1999 Kenworth T2000
Is the 1999 Kenworth T2000 reliable?
Owners have filed 2 complaints about the 1999 Kenworth T2000, close to a typical T2000 model year.
What is the most common problem with the 1999 Kenworth T2000?
Brakes, with 1 complaint. Next is engine (1).
How many recalls does the 1999 Kenworth T2000 have?
8 recalls, covering suspension, steering and service brakes, air.
Was there a recall on the 1999 Kenworth T2000 brakes?
Yes, 1 recall: 00V026000. Check your VIN to see if your car still needs the free repair.
VIN decoder
See the problems and recalls for an exact car
Buying a used 1999 Kenworth T2000?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history