The frame, suspension, and brake lines rusted through prematurely. The brake lines were replaced all around before 75,000 miles. Before 80,000 miles the truck has been declared non-repairable as the frame and suspension have rusted through at inspection. Truck was lightly used since 2001 and had not hit 80,000. Miles but became unsafe to operate due to rust.
The worst 2001 Mazda B-Series Truck problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
- Acceleration9
- Brakes8
- Body7
- Transmission5
- Seat belts4
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
- Acceleration9
- Brakes8
- Body7
- Transmission5
- Seat belts4
- Tires4
- Fuel system3
- Suspension3
- Airbags1
- Electrical1
- Engine1
- Lights1
- Locks1
- Steering1
- Visibility1
Trouble codes owners of the 2001 Mazda B-Series Truck mention
B3000 4B2300 2
Recalls 3
Vehicle speed control: cruise control
- What is wrong
- Mazda is recalling model year 1995 through 1997 and model year 2001 through 2003 trucks equipped with texas instruments speed control deactivation switch (scds) and/or anti-lock brake system (ABS) and manufactured on or before december 5, 2002. A component of the cruise control deactivation switch may deteriorate over time and develop a leak. This occurrence could cause the switch to overheat, smoke or burn which could result in an under hood fire.
- Risk
- A vehicle fire could occur with or without the engine running.
- Remedy
- Mazda will notify owners that dealers will install a universal fused jumper harness on the cruise control deactivation switch free of charge. The safety recall began on december 11, 2009. Owners may contact mazda at 1‑800‑222‑5500 option #6.
Recall number 09V414000 · Recall details
Vehicle speed control
- What is wrong
- On certain trucks equipped with a speed control system, the speed control deactivation switch may, under certain conditions, leak internally and then overheat, smoke, or burn.
- Risk
- This could result in an underhood fire.
- Remedy
- Dealers will install a fused wiring harness. An interim notice was sent to owners on september 7, 2007, directing them to have the speed deactivation control switch disconnected temporarily. A second notification letter to owners was in february 2008 advising them to return to dealers for installation of the repair part. Owners of affected vehicles who did not receive a phase 2 notice and have not had the recall completed will be notified beginning august 6, 2008. Owners may contact mazda at 1‑800‑222‑5500.
Recall number 07V347000 · Recall details
Seat belts: front: buckle assembly
- What is wrong
- Vehicle description: light duty trucks equipped with seat belts supplied by trw. It is possible that the driver's and/or front passenger's outboard seat belt buckle may not fully latch. Ford crown victoria built at st. Thomas assembly plant from 4/17/00 - 5/29/01 mercury grand marquis built at st. Thomas assembly plant from 4/17/00 - 5/29/01. Lincoln town cars built at wixom assembly plant from 3/27/00 - 5/30/01. Lincoln navigators built at michigan truck plant from 4/11/00 - 5/31/01. Ford windstars built at oakville assembly plant from 3/23/00 - 5/30/01. Ford rangers built at twin cities plant from 3/28/00 - 5/30/01, and also at the edison plant from 3/13/00 - 5/25/01. Ford f-150 truck built at norfolk plant from 4/18/00 - 5/25/00; at ontario plant from 5/10/00 - 5/28/01; at kansas city plant from 9/11/99 - 5/25/01; and at cuautitlan plant from 5/16/00 - 6/9/01. Ford super duty f-250, f-350, f-450, and f-550 trucks built at kentucky plant from 4/17/00 - 5/27/01; and at cuautitlan plant from 5/16/00 - 6/19/01. Ford excursions built at kentucky plant from 4/17/00 - 10/2/00. Ford expeditions built at michigan truck plant from 4/11/00 - 5/31/01.
- Risk
- In the event of a crash, the restraint system may not provide adequate occupant protection, increasing the risk of personal injury to the seat occupant.
- Remedy
- Dealers will inspect the front outboard seat belt buckles and if the buckle fails the inspection process, it will be replaced. Owner notification began august 15, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mazda at 1‑800‑222‑5500.
Recall number 01V227002 · Recall details
Technical service bulletins for the 2001 Mazda B-Series Truck 132
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer
- Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems
- Speedometer replacement procedure
- Some customers may complain of signs of oil on the struts or shock absorbers
- Some customers may experience a squeaking noise may be heard from the exhaust manifold when the idle speed...
- In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer.
- This service bulletin provides testing and charging procedures in order to promote proper battery...
- Accessory instructions can be found on OneMazda under Dealer Resources
- The Mazda DCA-8000 is required for all warranty battery testing
- Battery Maintenance: This service bulletin provides testing and charging procedures in order to promote...
What 2001 Mazda B-Series Truck owners say
Most recent owner complaints, unedited.
The entire frame rusted out from under my truck. While driving down the street, the spare tire fell away from the bottom of the truck, ripping off the left side of the bumper. I have been to numerous garages about repair and none will touch it. The say that this is a problem with the mazda truck (and sister truck a ford). The body of the truck is still in great shape. It only has 90600 miles on it. There is not any rusting on the outside of the truck. Everything but the frame would run for another 90000 mile easily! I feel that something should be done about this problem. It is such a waste of money to have it just rot away!
I contacted heritage mazda in towson md to have the recall fixed. After being transferred 4 different times, the service writer informed me that they could not get the harness to fix this issue and I would have to wait a few years. I contacted mazda corporate direct and was told by them that the part is available. I feel that heritage just didn't want to do the fix and would like someone to look into why they will not fix a recall item for my truck?
Discovered the right rear spring hanger had rusted off the frame of the truck. Further inspection has found the frame is so badly rusted that repair of the spring hanger is not possible due to the overall condition of the frame. Simply put, the frame has rotted and pieces fall of as you drive. There is no more frame left to re-attach the rear spring to. Severe premature rust. The rest of the vehicle metal is in good condition.
Tl* the contact owns a 2001 mazda b3000. While driving approximately 60 MPH the contact noticed the accelerator pedal felt loose. After the accelerator pedal was engaged with force there was a popping sound and the pedal began to function normally. When the cruise control was activated the vehicle suddenly accelerated on its own. The contact was able to slow the vehicle down when he depressed the brake pedal. The vehicle was taken to the dealer for diagnostic testing. The contact was not aware of the exact repair performed but stated the technician repaired the accelerator pedal. The failure continued after the vehicle was repaired. The vehicle was not repaired. The approximate failure mileage was 20,000.
Tl- the contact owns a 2001 mazda b4000 cab plus. While driving in inclement weather, the contact began to lose control of the vehicle. He then engaged the electronic four wheel drive function but the function failed to activate. The dealer was contacted and advised the contact to purchase a new 4x4 control module. The manufacturer was also contacted but did not offer any assistance since the vehicle was no longer under warranty. No repairs were performed. The failure mileage was unknown. Kmj
Tl* the contact owns a 2001 mazda b3000 4x4 pickup. The contact stated that after taking the vehicle in for regular service, the technicians advised him that the frame and the brake lines were severely rusted. The vehicle was repaired for the frame. The manufacturer was contacted and they offered no assistance. The failure mileage was approximately 90,000. The VIN was unavailable. When the mazda was lifted to repair the brake line and replace the brakes the spring shackles broke off due to extreme rust, costing an additional $450. I think mazda should be held responsible just as toyota recalled their vehicles due to extreme rusting. Updated 11/09/2011 *ln
2001 - rear leaf spring shackles & brackets rot off the frame. Replaced both. The entire area of the frame where the bumper, leaf spring, spare tire and trailer hitch attach is all extremely rotted. The garage where repaired mentioned to keep checking the frame periodically, as it may rot faster than they can estimate.
Tl*the contact owns a 2001 mazda b2500. The contact stated that on five different occasions while at a stop light, the vehicle would suddenly accelerate when he depressed the brake pedal; he described the failure stating that it felt as if he touched the accelerator pedal. He also stated that the check engine light was currently illuminated. He had not taken the vehicle to the dealership or called the manufacturer to-date. The vehicle had not been repaired at the time of the complaint. The current mileage was 166,197. The failure mileage was approximately 165,500.
2008 - rear leaf spring shackle rots off. Replaced both. 2009 - shackle bracket falls off with about 6" of the frame with it. My only option was to personally weld a piece of metal and fabricate a new bracket. The other side will fail soon as well. The entire area of the frame where the bumper, leaf spring, spare tire and trailer hitch attach is almost gone. The weird thing is that the body is sound. The bed is no more than an inch away and looks new.
Compare the 2001 Mazda B-Series Truck
Other model years
19901991199219931994199519961997199819992000200120022003200420052006200720082009
Questions about the 2001 Mazda B-Series Truck
Is the 2001 Mazda B-Series Truck reliable?
Owners have filed 37 complaints about the 2001 Mazda B-Series Truck, 1.8 times a typical B-Series Truck model year.
What is the 2001 Mazda B-Series Truck year score?
The 2001 Mazda B-Series Truck scores 54 out of 100 (below average). The score compares it with the other model years of the Mazda B-Series Truck: 75 is a typical year, 50 means twice the usual complaints, and serious complaints and recalls lower it.
What is the most common problem with the 2001 Mazda B-Series Truck?
Acceleration and speed control, with 9 complaints. Next is brakes (8).
How many recalls does the 2001 Mazda B-Series Truck have?
3 recalls, covering vehicle speed control and seat belts.
Was there a recall on the 2001 Mazda B-Series Truck acceleration?
Yes, 2 recalls: 09V414000, 07V347000. Check your VIN to see if your car still needs the free repair.
What year does the Mazda B-Series Truck have the most acceleration problems?
The Mazda B-Series Truck model years with the most acceleration complaints are 1998 (13 complaints), 1994 (12 complaints) and 1999 (10 complaints).
VIN decoder
See the problems and recalls for an exact car
Buying a used 2001 Mazda B-Series Truck?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history