The contact owns a 2018 Mazda Mazda3. The contact stated that while reversing, the rearview camera displayed a distorted image, nearly resulting in a collision with a parked vehicle. Several unknown warning lights illuminated, creating a driver distraction. In addition, the infotainment screen delaminated and experienced ghost touching with random phantom touches. The vehicle was taken to the dealer, where it was determined that the infotainment system required a new lens kit. The vehicle was not repaired. The manufacturer was notified of the failure by telephone, and a case was filed. The failure mileage was unknown.
2018 Mazda MAZDA3 driver assistance problems
21 complaints (19% of all complaints for this car). Typical mileage when it fails: 40,000. 2 crashes reported.
- owner complaints
- 21
- of this car's complaints
- 19%
- typical mileage
- 40,000
- crashes
- 2
- recalls
- 1
Which part fails
- Warnings3
- Warning2
- Sensing system: camera2
- Rearview system braking1
- Blind spot detection1
- Automatic emergency braking1
- Adaptive cruise control1
At what mileage
Complaints by mileage at the time of the problem.
0k-25k
25k-50k
50k-75k
75k-100k
100k-125k
125k-150k
150k-175k
175k-200k
200k+
Mazda MAZDA3 driver assistance problems in other years
Related recalls
Back over prevention: sensing system: camera
- What is wrong
- Mazda North American Operations (Mazda) is recalling certain 2014-2018 Mazda3 and 2016-2021 CX-3 vehicles. The rearview camera image may not display properly by showing a flickering or distorted image.
- Risk
- A rearview camera that does not display properly can reduce the driver's rear view, increasing the risk of a crash or injury.
- Remedy
- Dealers will inspect and replace the rearview camera, as necessary. In addition, dealers will install a wiring harness fastening seal. All repairs will be performed free of charge. Interim notification letters, notifying owners of the safety risk, were mailed September 13, 2023. Final owner letters for affected models and model years in the states of CT, MA, MD, NJ, NY, PA and VA were mailed August 14, 2024. The remaining owner notification letters will be mailed at a future date, anticipated on or before May 1, 2025. Owners may contact Mazda customer service at 1‑800‑222‑5500, Option 6. Mazda's number for this recall is 6023G.
Recall number 23V487000 · Recall details
What 2018 Mazda MAZDA3 owners say
Most recent owner complaints, unedited.
I got into my car and the infotainment screen was cracked. It had been parked in moderate weather (no extreme heat or cold) and just randomly had multiple small cracks across the screen. This makes the back up camera difficult to see which is a safety concern.
The Infotainment system is cracking uncontrollably and will make the rear view camera unusable and a safety issue. Mazda corporation wont pay for the repair that they are charging close to 2k to do.
The contact owns a 2018 Mazda Mazda3. The contact stated while reversing, the rearview camera image was flickering and occasionally failed to display an image. The vehicle was taken to the dealer several times. The dealer recommended that the rearview camera be replaced. The vehicle was not repaired. The contact received notification of the federal safety agency Campaign Number: 23V487000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 25,000. VIN tool confirms parts not available.
The contact owns a 2018 Mazda Mazda3. The contact stated that while reversing, the camera was flickering on and off and the camera was fuzzy. There were no warning lights illuminated. The contact received notification of the federal safety agency Campaign Number: 23V487000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was approximately 60,000. VIN tool confirms parts not available.
The contact owns a 2018 Mazda Mazda3. The contact received notification of the federal safety agency Campaign Number: 23V487000 (Back Over Prevention). The contact stated that on several occasions while in reverse (R), the backup camera flickered and was inoperable. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 130,000.
The contact owns a 2018 Mazda Mazda3. The contact received notification of the federal safety agency Campaign Number: 23V487000 (Back Over Prevention); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while shifted into reverse(R) and reversing out of the driveway, the rearview camera image was flickering on the display screen. The contact stated that the flickering was intermittent but eventually the camera became inoperable. The contact had notified the manufacturer of the failure. The failure mileage was approximately 38,000. VIN tool confirms parts not available.
The contact owns a 2018 Mazda Mazda3. The contact stated while reversing, the rearview camera image was distorted and failed to display on several occasions. There was no warning light illuminated. The vehicle was taken to the dealer, where it was diagnosed that the rearview camera had failed and needed to be replaced. The vehicle was not repaired. The contact later received notification of the federal safety agency Campaign Number: 23V487000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was unknown. VIN tool confirms parts not available.
The contact owns a 2018 Mazda Mazda3. The contact received notification of the federal safety agency Campaign Number: 23V487000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.
In 2023, the reverse camera would either flicker or completely shut off (displaying a blank screen) while the reverse gear is engaged. While reversing the vehicle to park onto the property the rear camera image failed to display in the vehicle, leading to a collision with the curb. The limited visibility out of the rear windshield for the Mazda 3 leads to a typical driver relying on the camera display to show obstructions not visible through the rear and side mirrors. This failure lead to the car impacting the curb and the passenger being shocked that the car was in an accident. If that was child or small animal, they would have been hit or run over. Luckily, this failure only resulted in property damage, a large dent in the bumper, and possible exhaust damage (see attached). A recall notice for this known Mazda camera issue was sent out in the mail by the manufacturer at the end of 2023. Mazda failed to address the issue when inquired over the phone, instead stating they "Would be in contact once a solution was found." Mazda did not reach out or notify me at any point with a solution until the incident above occurred. After contacting Mazda by phone to address the issue, they said there is still no solution found but to take the vehicle down for a diagnostic test that would be the owner's responsibility to pay for if it was found to be a "owner issue". After a brief discussion and multiple phone calls, Mazda stated they would make the repair as it was confirmed to be a Mazda issue that had just been solved. However, the car would need to be kept over the weekend and a loaner vehicle would be provided. Mazda also stated the collision was a driver issue and Mazda will not be responsible for anything that occurs while using the vehicle. At that point, the dealership was unwilling to assist me and I left. This seems to be a Mazda originating issue, if the rear camera functioned as intended, the curb would have been visible and the impact could have been avoided.
Questions about the 2018 Mazda MAZDA3 driver assistance
Does the 2018 Mazda MAZDA3 have driver assistance problems?
Owners have filed 21 complaints about the driver assistance of the 2018 Mazda MAZDA3, 19% of all its complaints.
At what mileage do 2018 Mazda MAZDA3 driver assistance problems start?
The typical (median) mileage in owner complaints is 40,000 miles.
Was there a recall on the 2018 Mazda MAZDA3 driver assistance?
Yes, 1 recall: 23V487000. Check your VIN to see if your car still needs the free repair.
What year does the Mazda MAZDA3 have the most driver assistance problems?
The Mazda MAZDA3 model years with the most driver assistance complaints are 2018 (21 complaints), 2012 (19 complaints) and 2020 (17 complaints).
Other 2018 Mazda MAZDA3 problems
Electrical 30Visibility 16Engine 14Fuel system 11Brakes 6Transmission 5Acceleration 2Body 2Steering 2Wheels 2Seat belts 1Seats 1
VIN decoder
See the problems and recalls for an exact car
Buying a used 2018 Mazda MAZDA3?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history