MINI Cooper stalling problems

Filed Nov 4, 2024 · Acceleration, Engine · CT

Engine stalling Oil pan leaks Caused the engine to shut down when slowing down or sitting in traffic on highway. No warning lights prior to incidents Only right after

Filed Jun 25, 2024 · Electrical · 130,000 miles · ME

The contact owns a 2007 Mini Cooper. The contact stated while operating the vehicle, the check engine, ABS, and Dynamic Stability Control (DSC) warning lights remained illuminated, and the vehicle lost motive power and stalled. The vehicle was taken to the local mechanic who diagnosed that the foot well control module was faulty and needed to be replaced. The vehicle was not yet repaired. The local dealer was notified of the failure and the contact was informed that the VIN was not included in the federal safety agency Campaign Number: 23V337000 (Electrical System). The contact stated that the vehicle had experienced the failure listed in the recall. The manufacturer was not yet contacted. The failure mileage was 130,000.

Filed Mar 13, 2024 · Electrical, Engine · 30,000 miles · VA

The contact owns a 2010 Mini Cooper. The contact received notification of the federal safety agency Campaign Number: 23V337000 (Electrical System) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact stated while driving approximately 65 MPH, the vehicle stalled. The contact stated that she was unable to check for warning lights due to a previous failure of the instrument cluster. The contact was able to coast the vehicle over to the side of the road. The contact was unable to restart the vehicle and had the vehicle towed to the residence. The contact stated that the stall was an intermittent failure and occurred at various speeds. Additionally, the contact stated that there were various other electrical failures with the power windows. Additionally, the sunroof was unable to open or close as needed. The contact stated that the vehicle was also intermittently not able to turn off after turning the ignition key to the off position and remained running until the vehicle turned off independently. The contact drove the vehicle to a local dealer who diagnosed the vehicle and related the failure to the federal safety agency Campaign Number: 23V337000 (Electrical System). The failure mileage was approximately 30,000. VIN tool confirms parts not available.

Filed Mar 1, 2024 · Engine, Fuel system · CO

Freeze plug randomly popped out while driving causing vehicle to stall in the middle of traffic almost causing a major accident and or death. Research indicates there has been numerous complaints by Mini Cooper owners experiencing the same issue of a premature unexplained failure with no action taken from Mini to mitigate this safety issue. I’m lucky to be alive.

Filed Jan 11, 2024 · Engine, Fuel system · AZ

There are no open recalls on my car. I am needing physical proof/documentation that the recall part has been replaced. The car is having issues stalling/losing power while driving. The dealership claims there is nothing wrong with the car and if they can't recreate failure then the car is deemed fine to drive. This car was purchased for my 16yr old son as a daily driver. After multiple weeks of the car being at The Mini of Tempe Dealership, they released the car back to me because there is "nothing wrong" with the car. I took it to another specialized Mini mechanic in the area for a second opinion. This mechanic states the cause of intermittent failure is from the Auxillary Coolant Pump for the Turbo. This is the same part that was a safety recall for potential fire. I have no record of this part ever being replaced. As described in the recall, the car is at risk of fire. Recall campaign #[XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Filed Aug 8, 2023 · Electrical, Engine · CA

The fuse box JBE module has a Quality Assurance problem with a solder connection to the NEC low pressure fuel relay. This is a known issue with BMW/Mini. The car suddenly stalls without warning. If the driver is not keen or if traffic patterns do not allow, the car can be left in very dangerous situations on the highway or in the middle of intersection. The repair for this problem is widely distributed online via blogs and YouTube, but replacement modules are $1500 (part only) and these modules are not available until at least October 2023. There are no warning lights or other warnings prior to the incident. While I am not aware of any serious injuries, it is only a matter of time before someone is t-boned at an intersections. This part MUST be immediately recalled due to the safety risk. The images below show the JBE fuse box housing as well as the PCB where the cold solder joint can be seen. I have circled the cold solder joint in the close up picture.

Filed Jun 15, 2023 · Electrical, Fuel system · UT

The fuel pump relay circuit board has a failed point in the soldering, causing the car to intermittently stall and die on the road. My safety was at risk because my car died randomly with no warning on a busy road. Can not even limp car to side of road. The part is being replaced by dealer where car was purchased, but a quick internet search provides thousands of similar results. There were no warning lights or any kind of code stored in the computer. I only had the car for one day before the car died so I am not aware of any prior warning signs.

Filed May 1, 2023 · Electrical · FL

I am writing to express my concerns about the safety of the 2011 Mini Cooper, specifically regarding the Car Access System (CAS) module. There is a widespread issue with the CAS module failing, which can result in the vehicle not starting or even stalling while driving. This poses a serious safety risk to drivers and passengers, as a sudden stall or loss of power can lead to accidents, injuries, or death. Furthermore, there is currently a backorder of the part, and it is not clear if there are any parts available which do not have this single point of failure. This means that even if a vehicle owner experiences this issue, there is no clear resolution to the problem, and the vehicle remains unsafe to drive. This has been diagnosed by an automotive repair shop, and I have discussed this issue with the Mini Cooper dealer, Mini Cooper/BMW manufacturing, BMW/Mini Assistance, and the auto repair shop. Both the dealer and the auto shop have both reported over a dozen cars with the same issue that have all been rendered non-functional. Average time to allegedly fix the problem is anywhere between 4 months and 1 year, but there does not seem to be resolution. The Mini Cooper dealer said there likely will be a recall at some point, but given the company’s history of failing to address safety issues such as these and issuing recalls in a timely manner, we have taken reporting this issue into our own hands. I believe that this issue warrants an investigation by the federal safety agency and that a recall may be necessary to ensure the safety of drivers and passengers of the 2011 Mini Cooper. I urge you to take action on this matter and investigate this issue further. Thank you for your attention to this matter. Sincerely, [XXX] INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).

Filed Jan 21, 2023 · Engine · RI

On 2014 a Class Action Lawsuit was filed against BMW OF NORTH AMERICA for claims regarding MINI COOPER models. Answering your questions as follows: -The failing component was the timing chain tensioner -Yes, engine stalled at any speed -No, dealer did not acknowledge the real problem -No, dealer did not told me about the Class Action Lawsuit, did not advice me of any preventive repair or to install a new timing chain tensioner, when the component failed dealer told me that the problem was a jumping timing chain ; the same excuse as in the lawsuit. -There was only an engine light, not any other warning light There were two repairs, the first for $ 2,629.10 on 6/18/2016 the second for $ 3,354.93 on 1/13/2017 dealer had a two years parts and labor warranty that didn't honor and in 2016 the lawsuit was active and not of my knowledge. My question is: if the production numbers engraved on the timing chain tensioner cylinder face match or are part of the production batch from the factory for which the class action lawsuit took place ? Numbers top line: 7565868 80-02 Lower line: IV/ IS GERMANY 3 1 0 This is looks like half cero All components (parts) and the vehicle are available for inspection. Once engine is out of timing pistons will hit the valves (interference engine), in my engine broke at least one valve seat, pieces fell into combustion chamber getting stuck between pistons and cylinder walls scratching these, result lost of compression, engine die. Engine was beyond any repair, and still was charged for. Lawsuit for vehicles manufactured goes to April 2007 mine was February 2007 Neither the MINI COOPER dealer or BMW North America corporate offices paid any attention to my complaint.

Filed Jan 27, 2022 · Electrical, Engine · CA

Repeated experiences of sudden engine operational failure and reduced and/or complete loss of power while driving. The engine malfunction indicator lamp comes on. Car stalls and stops in traffic on the highway and on streets blocking traffic. Will not start again until powered off for periods between 5-15 minutes if at all. -First experienced the issue February 2020 and have intermittently experienced the same issue ever since. -Occurs when driving at a variety of speeds and a variety of fuel levels. -If diagnostics were able to reveal an issue both fuel pumps were noted as the cause on different occasions. The High Pressure Fuel Pump has been the most diagnosed and repaired issue. -Car has been diagnosed by the dealer and 3 independent service repair shops. Dealer stated no recall or existing issue that would cover this problem and have not received any notifications from the manufacture.