The components and systems experiencing problems in my 2020 Nissan Altima S 2.5L include the engine, throttle body, and mass airflow (MAF) sensor system. The vehicle has experienced severe engine performance issues, including excessive fuel consumption, jerking, hesitation during acceleration, reduced engine power, and unexpected limp mode. The safety of myself and others were put at risk because the car did not accelerate anymore in the middle of on going traffic. It was me and my 2 underaged children in the car. Yes it has been confirmed by an independent service center. Yes, insurance representatives and others including mechanics. Check engine light appeared
Nissan Altima check engine light comes on
1,089 of the 15,494 owner complaints about the Nissan Altima describe check engine light, most of them for the 2002 model year.
- owner complaints
- 1,089
- worst model year
- 2002
- typical repair cost reported
- $1,000
- typical mileage
- 85,000
Is there a fix? There are 7 recalls for this area of the car. See below
By model year
Often reported together
Stalling 293Jerking 102Engine failure 73Loss of power 72Oil consumption 70CVT failure 70Won't start 64Hesitation 57
Trouble codes mentioned
P0776 15P0420 11P0335 11P0841 6P0101 6P0725 5P0340 4P0965 3P0507 3P17F1 2
What owners say
2017 Nissan Altima purchased used from large used dealer chain location in Albuquerque, NM on 11/24/25. At delivery, salesman demonstrated driver seat moved up/down and stated it just needed a bolt/belt. Co-signer who was present witnessed. Component failed: Driver seat front mounting bolt missing — seat not secured to floor, moves up/down and wobbles side to side. Vehicle was sold with this defect present at delivery. Safety risk: In crash or hard braking, unsecured driver seat can shift, ejection risk, loss of control, seatbelt and airbag will not protect correctly. Driver and any passenger at risk. Elderly co-signer also at risk as passenger. Reproduced/confirmed: Yes. Dealer had vehicle 10/09-10/12/26 for service, did not repair seat, attempted to charge $5,000 for transmission codes P0965 and P0776 limp mode. Vehicle returned 11:05 AM 10/12/26 by tow driver still with same defect. Video taken night of 10/12/26 shows seat still wobbling same as delivery 11 months earlier. Mother-in-law thought it was fixed at 3:19 AM same day, video proves it was not. Inspected by: Dealer service department, independent quick lube shop, tow driver. Warning lamps: Transmission limp mode, check engine light for P0965/P0776 — seat has no warning lamp. Vehicle available for inspection upon request — currently at home address on file, not driven due to safety.
The contact owns a 2019 Nissan Altima. The contact stated that while driving at an undisclosed speed, the check engine warning light illuminated, and the engine seized. The vehicle was towed to the residence. The vehicle was later towed to an independent mechanic, where it was diagnosed with internal engine failure. The contact was informed that there was oil leaking onto the spark plugs. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The contact referenced an unknown recall; however, the VIN was not associated with a recall related to the failure. The manufacturer was contacted by phone and made aware of the failure. The contact was awaiting a return call from the manufacturer. The failure mileage was approximately 70,000.
My 2016 Nissan Altima has approximately 68,900 miles. When I am stopped and press the gas pedal, the vehicle sometimes hesitates before it begins moving. It does not accelerate normally, which is dangerous when I am pulling into traffic, crossing an intersection, or making a turn. At other times while driving, the vehicle will not accelerate properly and appears to become stuck in a low gear. The engine RPM may rise to approximately 4,000, but the vehicle does not shift or increase speed normally. Turning the vehicle off and restarting it may temporarily make the problem go away, but it can happen again without warning. There is currently NO CHECK ENGINE light or other warning light that has ever come on. So I had the auto parts store attach an OBD-II scanner and the ONLY error code was P0776. This prompted me to research further and that is when I learned of the CVT issues with Nissan. Because the loss of acceleration and failure to shift are intermittent, I cannot predict when the vehicle will hesitate or fail to respond. I am concerned that I could be struck by another vehicle if this happens while entering traffic, crossing an intersection, or attempting to maintain speed.
When I am driving my car randomly states check engine and makes a beeping noise and then the engine starts to make some type of combustion noise and then slows down and then turns off.
3 days before the incident the check engine light came on but went off the next day. I was driving home from an overnight shift on Sunday, July 5th when I heard a loud boom the car instantly began to sound like something was dragging on the ground, the car was shifting right no matter which way I turned the steering wheel. I pulled over checked underneath the vehicle noticed this piece dragging I immediately called a tow. A mechanic took a look and stated the control arm has snapped and deemed the car unsafe to operate. I am financing this vehicle and it has only been a year even with routine maintenance and the upkeep of the vehicle since about a month or 2 after purchasing the vehicle I’ve been having major issues
The contact's friend owns a 2013 Nissan Altima. The contact stated that when the vehicle was parked, the check engine warning light illuminated and remained illuminated for an extended period. The vehicle was taken to two independent mechanic shops, where it was diagnosed that the catalytic converter needed to be replaced; however, the vehicle was not repaired. The vehicle was then taken to a dealer, where the check engine warning light was no longer illuminated, and the failure could not be replicated. The manufacturer was not notified of the failure. The failure mileage was approximately 92,000.
The rear lower arm control snapped while driving on even surface road. I’m a female and when I heard the pop I got out and inspected the car. Could have caused injury to myself or other motorists. Confirmed with two mechanics that this in fact was the rear arm control and that they have had these issues with a lot of Nissan Altima and Sentra. Was advised to take to Nissan dealership to see if they will repair-which I did, but I’m currently awaiting a response by Nissan to see if they will cover it. The car has been making a squeaky sound but it comes and goes. The check engine light came on but displayed loose fuel cap and it goes out when I put gas in my car from time to time. I’ve also heard that is another issue with Nissan with the loose fuel cap. I just want my vehicle repaired. It is maintained although it is a 2017 and has 157,000 miles. No real issues until now.
-Upon research, it appears my Nissan has an issue with the headlight lamps that have caused the low beams to diminish over time. This is a recorded defect (class action lawsuit [XXX], et al. v. Nissan North America, Inc.) of Nissan Altimas years 2013-2018. -There is a Nissan Dealership in my city I can take the vehicle to for further inspection and subsequent replacement. I would like documentation to further provide to the dealership in case there is any resistance to replacement. -The headlights are so dim I cannot see the road ~15 feet beyond me. The car's high beams, turn signals, and brake lights are all in working condition. The only thing affected are the low beam lights, which further suggest the headlight lens is not of issue. This can cause difficulty seeing at night and could prove to be a safety issue for myself and others, as well as limiting others' visibility of me. -There have been no warning lamps, messages, or other symptoms prior. The check engine light is not on. I have had this car in my possession and under my name for about a year and the headlights have diminished over time to an unsafe degree. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
What component or system failed or malfunctioned, and is it available for inspection upon request? The Engine Control Module (ECM) is malfunctioning, triggering persistent P0101 codes related to the Mass Air Flow (MAF) sensor. This specific issue is addressed in Nissan Technical Service Bulletin DE97AA, which recommends an ECM reprogramming. The component is still installed in the vehicle and is available for inspection. ⸻ • How was your safety or the safety of others put at risk? When the vehicle is at a complete stop and I attempt to accelerate, it becomes jumpy and unresponsive, refusing to accelerate properly. This creates a serious safety hazard, especially when trying to merge into traffic or cross intersections, as I am unable to match the speed of other vehicles. This increases the risk of being rear-ended or causing an accident due to unexpectedly slow acceleration. ⸻ • Has the problem been reproduced or confirmed by a dealer or independent service center? Yes. An independent mechanic diagnosed the issue and confirmed the code P0101. After reviewing Nissan’s official TSB DE97AA, they advised me to go to a Nissan dealership to have the ECM reprogrammed as outlined in the bulletin. ⸻ • Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? The vehicle was inspected by an independent mechanic, but not yet by the manufacturer. The dealership is aware of the issue but has refused to perform the repair without payment. ⸻ • Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? Yes. The Check Engine Light is consistently triggered by code P0101, and the traction control warning light also comes on when the issue is active. The symptoms appeared recently and continue to recur even after the code is reset by standard non-dealership methods like unplugging the battery.
Related recalls
Engine and engine cooling: engine: hard parts internal/mechanical
- What is wrong
- Nissan North America, Inc. (Nissan) is recalling certain 2021-2024 Rogue, 2019-2020 Altima, 2019-2022 Infiniti QX50, and 2022 Infiniti QX55 vehicles equipped with 3-cylinder 1.5L or 4-cylinder 2.0L variable compression turbo (VC-Turbo) engines. The engine bearings may have manufacturing defects that can lead to engine failure.
- Risk
- Engine failure increases the risk of a crash. A bearing failure may cause a breach in the engine block, allowing hot oil to be discharged, increasing the risk of an engine fire.
- Remedy
- Dealers will reprogram the engine control module (ECM) software, free of charge. Owner letters were mailed April 8, 2026. Owners may contact Nissan's customer service at 800‑647‑7261 or Infiniti's customer service at 1‑800‑662‑6200. Nissan's numbers for this recall are R25A8/A9 and R25B1/B2.
Recall number 25V437000 · Recall details
Engine and engine cooling
- What is wrong
- On certain passenger vehicles equipped with a 2.5l engine, the crankshaft position sensor can overheat causing a brief interruption in the signal output from the sensor.
- Risk
- If the interruption in the signal from the crankshaft position sensor is so brief that the electronic control module (ECM) logic does not have time to diagnose the condition, the engine may stop running without warning while the vehicle is driven at a low speed increasing the risk of a crash.
- Remedy
- Dealers will reprogram the ECM free of charge. Certain my 2006 altimas which have been previously remedied under recall campaign 06v223 (nissan r0606) are not included in this recall since the reprogramming for 06v223 also included this reprogramming. The recall began on december 31, 2007. Owners may contact nissan at 1‑800‑647‑7261.
Recall number 07V527000 · Recall details
Engine and engine cooling
- What is wrong
- On certain vehicles, if a sufficiently hot object enters the air filter housing through the engine fresh air intake system and contacts the engine air filter, the flammability characteristics of the air filter material are such that the filter may ignite.
- Risk
- If the air filter material ignites, a fire may occur.
- Remedy
- Dealers will replace the air filter with a new one that has improved anti-flammability material characteristics. The recall began on july 3, 2007, and will continue through october 1, 2007. Owners may contact nissan at 1‑800‑647‑7261.
Recall number 07V267000 · Recall details
Engine and engine cooling
- What is wrong
- On certain passenger vehicles equipped with a 2.5l engine, the crank angle sensor is affected by temperature variations. Under certain driving conditions, these variations in temperature can be large enough to cause a brief interruption in the signal output from the sensor.
- Risk
- If the interruption in the signal from the sensor is so brief that the electronic control module (ECM) logic does not have time to diagnose the condition, the engine may stop running without warning while the vehicle is driven at a low speed increasing the risk of a crash.
- Remedy
- Dealers will reprogram the ECM free of charge. The recall began on august 21, 2006. Owners may contact nissan at 1‑800‑647‑7261.
Recall number 06V242000 · Recall details
Engine and engine cooling
- What is wrong
- Certain passenger vehicles equipped with 2.5l engines may experience excessive engine oil consumption as a result of improper performance of the piston rings.
- Risk
- If the oil is not maintained at least at the minimum level, engine damage can occur and in extreme cases result in an engine fire.
- Remedy
- Dealers will reprogram the electronic control module (ECM or engine computer). Your vehicle will also be inspected to determine if it has been consuming engine oil at a higher than normal rate. In a small percentage of vehicles, engine replacement will be needed. On june 9, 2006, nissan notified owners of the possibility of excessive oil consumption and the importance of maintaining the oil at a proper level. Follow-up letter to owners advising them of the status of the recall was sent during august 2006. Followup letter to owners was sent on november 15, 2006. Owners may contact nissan at 1‑800‑647‑7261.
Recall number 06V223000 · Recall details
Engine and engine cooling
- What is wrong
- On certain passenger vehicles, the circuit board for the crank position sensor or cam position sensor may have an improper solder joint due to solder deformation caused by heat stress accelerated by the existence of flux residue during the soldering process.
- Risk
- This could cause the "service engine soon" warning light to come on, create a no start condition, cause reduced engine power, or cause the engine to stop running without warning during vehicle operation, which could result in a crash.
- Remedy
- Dealers will replace the crank position sensors. Camshaft position sensor(s), and in some cases, the variable timing control sensor(s). Vehicles involved in a previous recall campaign, 01v357, are also included in this new campaign. The replacement sensors used in that campaign are also affected. Owner notification began on december 22, 2003. Owners should contact nissan at 1‑800‑647‑7261 or infiniti at 1‑800‑662‑6200.
Recall number 03V455000 · Recall details
Engine and engine cooling: exhaust system: manifold/header/muffler/tail pipe
- What is wrong
- On certain vehicles equipped with the 2.5 liter engine, the exhaust pipe hanger pin may catch debris from the road that could be ignited by contact with the main catalyst. Also on 2002 altima and sentra vehicles, certain engine operating conditions may cause the pre-catalyst to overheat and damage the catalyst substrate.
- Risk
- Either of these two conditions could result in a fire.
- Remedy
- Dealers will remove the protruding portion of the exhaust pipe hanger pin. In addition to the corrective action, in order to reduce the risk of fire in the event of poor or improper maintenance that could result in oil spillage, heat shield(s) will be installed on the pre-catalyst and exhaust tube. Owner notification began on july 28, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact nissan at 1‑800‑647‑7261. Nissan recall nos. R3007, r3014, r3015, r3016, r3017. Also on 2002 altima and sentra vehicles, certain engine operating conditions may cause the pre-catalyst to overheat and damage the catalyst substrate. If substrate particles enter the combustion chamber, they could score the cylinder walls, resulting in increased oil consumption. If the engine oil level is not checked on a periodic basis and drops below the low level, and the driver continues to operate the vehicle ignoring noticeable engine noise, engine damage may occur which could result in a fire. The pre-catalyst will be tested to ensure it is working properly and replaced if necessary. If damage is found inside the pre-catalyst, it will be necessary to replace the engine.
Recall number 03V084000 · Recall details
Questions about the Nissan Altima check engine light
Why does the check engine light come on in the Nissan Altima?
Owners who report it most often also describe engine stalls while driving, jerking or lurching and engine failure, and the codes they mention most are P0776, P0420 and P0335.
Which Nissan Altima years have check engine light problems?
The model years with the most reports are 2002 (193 complaints), 2003 (182 complaints) and 2005 (124 complaints).
How much does it cost to fix check engine light on the Nissan Altima?
Owners who mentioned a price put the repair at about $1,000 (median of 159 complaints that include a dollar amount). Costs vary with mileage, warranty and where the work is done.
VIN decoder
See the problems and recalls for an exact car
Buying a used Nissan Altima?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history