The vehicle is a 1990 oldsmobile cutlass ciera sl. I checked box as chevrolet as oldsmobile is not an option on the drop down. Four new tires installed between 12/31/13 and 1/31/14, uniroyal awp ii tiger paws size p185/75r14. Manufacturer's website reports they ?do not currently manufacture tires fitting this vehicles specifications.? Are the tiger paws ii p185/75r14 installed on my vehicle counterfeit tires? Since installing these tires, the vehicle "sways" when driving on grooved interstate highway pavement.
The worst 1990 Oldsmobile Cutlass problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
- Brakes51
- Seat belts12
- Electrical9
- Body8
- Engine7
- Acceleration6
- Fuel system5
- Lights5
- Seats3
- Transmission3
- Steering2
- Suspension2
- Tires2
- Wheels2
- Locks1
- Visibility1
Specific symptoms reported on the 1990 Oldsmobile Cutlass
Recalls 6
Structure
- What is wrong
- Vehicle description: passenger vehicles and mini vans originally sold or currently registered in the following states: connecticut, illinois, indiana, maine, massachusetts, michigan, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont and wisconsin. The rear cradle bolts pull through the retainers due to corrosion of the retainer. If both bolts pull through, the rear cradle would not longer be supported at these mounting locations and the steering intermediate shaft can separate from the steering gear.
- Risk
- If this were to occur while the vehicle was in motion, a vehicle crash could result.
- Remedy
- Dealers will replace the rear cradle bolts and retainers.
Recall number 97V058000 · Recall details
Wheels
- What is wrong
- Cracks develop in the wheel mounting surface. If these cracks become severe enough, the wheel will completely separate from the vehicle.
- Risk
- If wheel separation occurs while the vehicle is in motion, loss of steering and brake control of the vehicle occurs, and a vehicle crash could result without prior warning.
- Remedy
- Dealers will inspect the manufacturing date codes stamped on each wheel of the vehicle and if a wheel falls within the specified date code range, the dealer will replace that wheel assembly.
Recall number 95V115000 · Recall details
Wheels
- What is wrong
- Cracks develop in the wheel mounting surface. If these cracks become severe enough, the wheel will completely separate from the vehicle.
- Risk
- If wheel separation occurs while the vehicle is in motion, loss of steering and brake control of the vehicle occurs, and a vehicle crash could result without prior warning.
- Remedy
- Dealers will inspect the manufacturing codes stamped on each wheel of the vehicle and if a wheel falls within the specified date code range, the dealer will replace that wheel assembly.
Recall number 94V041000 · Recall details
Seat belts
- What is wrong
- Front shoulder safety belt webbing may separate at front belt upper guide loops on either side of the front seat.
- Risk
- Webbing separation could occur without prior warning andincrease the risk of injury to belted front outboard occupants in a high energycrash.
- Remedy
- Install a controlled rotation bracket on driver and passenger side front seat belt guide loops.
Recall number 91V005000 · Recall details
Exterior lighting: brake lights: switch
- What is wrong
- Brake stoplamps may not illuminate or, in some cases, stoplamps will not stay illuminated all the time when brakes are applied due to a faulty stoplamp switch. Also in vehicles equipped with cruise control, a faulty stoplamp switch can result in resumption of the cruise control function upon release of the brake pedal.
- Risk
- A trailing vehicle may not recognize a braking actionin time to respond appropriately. Also, cruise control will reengage uponrelease of the brake pedal and resume the set speed. In either case, it couldresult in a crash without prior warning.
- Remedy
- Install an improved design stoplamp switch.
Recall number 90V185000 · Recall details
Seat belts
- What is wrong
- Front shoulder belt guide loop attachment fastener may pull through door mounted anchor plate.
- Risk
- Seat belt may not sustain loads required by fmvss 210, and in a vehicle accident, the seat belt may not properly restrain a passenger, resulting in increased risk of greater injury to an occupant.
- Remedy
- Replace front shoulder belt guide loop attachment nuts and install new guide cover.
Recall number 90V054000 · Recall details
See all 6 recalls for the 1990 Oldsmobile Cutlass
Defect investigations
Engine cradle separation
The engine cradle front bolts and/or retainers may fail, allowing the front of the engine cradle to fall, possibly separating the steering intermediate shaft from the steering gear, with complete loss of steering control
EA00011
Cradle bolt failures
There is no summary currently available
RQ97017
Corroded rear disk brakes
There is no summary currently available
PE94063
Failure stop lamp switch
There is no summary currently available
PE90088
Technical service bulletins for the 1990 Oldsmobile Cutlass 3
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
1990 Oldsmobile Cutlass fuel economy
Official EPA estimates in miles per gallon (MPGe for electric). Ranges cover trims that share the same engine.
| Engine | Drive | City | Highway | Combined |
|---|---|---|---|---|
| 2.3L 4‑cyl | FWD | 19-20 | 28-29 | 23 |
| 2.5L 4‑cyl | FWD | 18-20 | 25-30 | 21-23 |
| 3.3L 6‑cyl | FWD | 18 | 25-26 | 20-21 |
What 1990 Oldsmobile Cutlass owners say
Most recent owner complaints, unedited.
Consumer complained that dashboard components were not working properly. She could not tell how much fuel there was or how fast she was traveling/driving. Consumer took vehicle to a mechanic to look at the problem, and was told it was a wiring defect. Mechanic tried to put a brand new part in the dashboard, but the problem recurred. Consume rhad this problem for 3 years.
Nar 1/29/2003. The consumer received a recall notice in march 2003 regarding the front frame /cradle bolt retainers. As per the recall letter they were replaced. On dec 12, 2002 before reaching a stop, there was a loud noise and the consumer felt a thump. When the consumer investigated, he found that the engine had fallen from the vehicle and there were no steering capabilities. Upon general inspection, the consumer was advised the rear frame/ cradle bolts and retainers had separated which caused the engine to drop and the steering shaft to separate from the steering gear. When the consumer contacted the manufacturer he was told the recall for the cradle bolts did not apply to his vehicle only the front.
Has failed 3 time at the cost of $300 each time. Dt
While driving rear disc brake on one side sticks on rotor. Had to replace cylinder. Problem has not been remedied as of yet. Please provide any further information, and vehicle identification number.
Locking torque converter fails to release and stalls engine.
I take good card of my car. In the last year I have had 4 oil changes, new tires and rims, an alignment, new brakes and rotors. On 04/20/2001 I had a oil change and asked penske auto to look at my struts and suspension because my car felt and little different than usually, and again about 06/05/2001. This time I asked the service manager to look and he could find nothing wrong. On 06/15/2001 I was on the interstate going about 65 miles an hour and had a few more miles to go but at the last minute decided to pull of on a exit to check a price of a product. I slowed down for a pedestrian, and as I got to about 10 miles a hour I felt a bump and lost all steering. Luckily I was able to stop the car with out wrecking or hitting the pedestrian. I got out of my car and found that the back part of the front a frame had fallen and the motor which had pulled the steering column apart. If I had not exited the interstate before I was suppose to I am sure I would be dead, also I am lucky I did not kill a pedestrian. I have contacted oldsmobile and they told me that they were aware of the problem but only recalled the cars in 20 states and my state was not one of them. They know that its problem exists on cars 1988 to 1990 and early 1991. Olds cutlass supreme, chev lumina, pontiac grand per and buick regal. I have a case # with olds c05115278 and have been working with larry waldrick at 1‑800‑442‑6537 he is trying to be helpful, but is getting nowhere. If I lived in iowa they would of warned me that my car was dangerous in 1997 and fixed my car, but since I live in ne and my car tried to kill me, I am getting the run a round. Oldsmobile told me to get my car to the dealership and they would look at it. I did on 08/02/2001. They say they will only pay half, and to this day 08/23/2001 have not gotten me a written estimate. I just want to protect the people in the other 30 states who have not been warned of these killer cars.
Vehicle was hit by a drunk driver. Headrest busted, and consumer's head and neck were injured. Consumer felt that headrest should not have busted. If it had not busted, certain injuries would not have been sustained. Consumer has contacted dealer. Please provide any further information.
Driver's side door is starting to crack where restraint harness is mounted. Dealer has inspected vehicle.*ak consumer was informed of recall 90v054 and went to have work done, however dealer stated the cracking where seat belt mount is located was not included in recall.
Lights on dashboard stay off for long periods of time, dealer stated cluster needed to be replaced. *ak the ignition module failed three times. The three coils and the computer were replaced. The vehicle still fails to start due to crank shaft sensor failure.
Compare the 1990 Oldsmobile Cutlass
Other model years
Questions about the 1990 Oldsmobile Cutlass
Is the 1990 Oldsmobile Cutlass reliable?
Owners have filed 103 complaints about the 1990 Oldsmobile Cutlass, fewer than a typical Cutlass model year.
What is the most common problem with the 1990 Oldsmobile Cutlass?
Brakes, with 51 complaints. Next is seat belts (12).
How many recalls does the 1990 Oldsmobile Cutlass have?
6 recalls, covering structure, wheels and seat belts.
What year does the Oldsmobile Cutlass have bad brakes?
The Oldsmobile Cutlass model years with the most brakes complaints are 1991 (59 complaints), 1992 (53 complaints) and 1990 (51 complaints).
What gas mileage does the 1990 Oldsmobile Cutlass get?
Official estimates for the 1990 Oldsmobile Cutlass range from 20 to 23 mpg combined. The most efficient version (2.3L 4-cyl, FWD) gets 19-20 city and 28-29 highway.
VIN decoder
See the problems and recalls for an exact car
Buying a used 1990 Oldsmobile Cutlass?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history