2017 Peterbilt 567 technical service bulletins
91 technical service bulletins and manufacturer communications cover the 2017 Peterbilt 567, including one warranty extension.
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- 7/700 Service Agreement
- The new 2.1m day cab lift tools, a Level 3 mandatory tool, are now available to order.
- Due to supplier constraints, an authorized aftermarket surge tank has been made available.
- Kenworth: Dealers should check the chassis list and SIR weekly for VIN changes
- An exhaust manifold slip joint seal kit is now available for EPA 2017-2024 PACCAR MX-13 engines.
- 105 chassis have been removed from the chassis list and unflagged in PRWS due to expiration of applicable...
- The Condition, Chassis Affected, Service Action, Warranty, and Procedure sections have been updated to...
- Troubleshooting procedures for 2.1m cab power windows are now available.
- This recently published bulletin has been updated to include inspection procedures to assess if a hood is...
- Model 567 Hood Strut Support Structure -A new procedure is now available to install hood structure...
- The attached procedures document has been updated with more detail and explanations
- Bogie Crossmember Torque Value Update
- EPA17-24 mx
- Procedure pictures updated for clarity
- T016: Warranty section updated to include 0.5 hours for test drive
- Info Only Unnecessary starter replacements can result from customer complaints regarding engine starting...
- Emissions Recall Certain vehicles with PACCAR MX-11 and MX-13 EMY2016 engines with less than 300,000 miles...
- Fix-as-Fail
- An engine software defect exists in certain vehicles equipped with EMY17 MX-13 and MX-11 engines that...
- Fix As Fail – Chassis that were manufactured with certain battery cable routing brackets may experience...
- 21PBN – lng/cng
- Info Only
- Fix-As-Fail On certain chassis with Low Air Leaf Suspension or Low-Low Air Leaf Suspension, the Height...
- The service information for Bendix Air Dryer maintenance is being updated to include new procedures.
- Due to major data carriers phasing out 3G networks, chassis currently utilizing first generation Peoplenet...
- Interim Safety Recall â Methane detection system will not warn the operator if the system loses power
- Non-Safety Campaign:Â Eaton Endurant transmissions may experience premature Main Drive Gear damage due to...
- Non-Safety Campaign
- Fix-As-Fail – Due to undersupply issues, only a limited supply of Diesel Exhaust Fluid (DEF) sensors are...
- Safety Recall â Cummins Fuel Rail Leak â the federal safety agency ID: 21V391 / TC: 2021-323, Cummins...
- An engine software update is required to resolve OBD system readiness, DEF doser diagnostics, and otherOBD...
- Selected engines have been identified to receive a camshaft inspection and an update for improved camshaft...
- Non-Safety Campaign – The batteries may drain quickly due to the VECU not going to sleep
- Non-Safety Campaign – Chassis with the City Horn option may generate unexpected alerts
- Information Only – Windshield washer pumps have a high No Trouble Found rate
- Fix-As-Fail
- Non-safety campaign: Vehicles equipped with an Eaton Endurant 12 speed transmission may experience...
- Fix-As-Fail
- Fix as Fail The HVAC system, on model 579 and 567 vehicles manufactured since 1/20/2012 may have...
- Fix-As-Fail – The Master Switch Module (MSM) may lose dash switch memory and functionality when the...
- Electrical system: 12v/24v/48v battery
- Fix-As-Fail
- Fix as Fail: For all conventional models, except 387/587, equipped with Side-of-Cab (“SOC”) exhaust and...
- Information Only:
- Information only: Hendrickson Softek front axle maintenance intervals and requirements.
- Safety Recall Bulletin: Updated with permanent repair path for phase 1 vehicles
- Safety Recall: the federal safety agency recall number is 20V130
- Safety Recall Interim Bulletin: The Tractor ABS Lamp May Not Illuminate When ABS Controller Loses Battery...
- Electrical system
- DEF tank covers may become loose and potentially crack on vehicles built before October 2019 with DEF tank...
- Electrical system
- Information Only: Proper jump-starting voltage will eliminate high voltage related issues and equipment...
- Information Only – Vehicles may have the connector seals on the wheel speed sensor incorrectly installed,...
- Information Only: Vehicles may have the connector seal on the wheel speed sensor incorrectly installed,...
- Electrical system: instrument cluster/panel
- Electrical system: instrument cluster/panel
- Information Only
- Fix as Fail: Certain Models 579 and 567 vehicles manufactured with a Cummins ISX-15 engine built before...
- Information Only:
- Information Only â
- Fix as Fail Vehicles are susceptible to noise interference due to an incorrect V-Can wiring in the roof...
- Fix-As-Fail -Â Composite fittings used in the cooling system may crack, resulting in coolant leaks
- Fix-As-Fail: Two separate causes have been identified as root
- Fix as Fail HVAC system may demonstrate inadequate temperature control, be stuck in defrost mode, or have...
- Fix as Fail: Vehicles built 11/30/15 to 7/18/16 may display an error message in the Service Advised...
- Information Only
- Information Only: Proper instructions for closure of power distribution box cover to prevent corrosion.
- Non-Safety Campaign: Vehicles equipped with Cummins ISX12 engines may have missing line heater fuses or...
- Information: Bendix ACOM Software version 6.16.5.0 for diagnostics may introduce an unrecoverable error
- Fix as Fail: DAVIE4 Service Tool is unable to support software updates on VECU's with Incorrect Hardware...
- Information
- Non-Safety Campaign
- Information only
- Tip for technicians to avoid a conflict with the engine controller when re-programming the transmission
- Fix-As-Fail ? Some vehicles may set a ?Cluster Not Detected? error message when connecting to the CECU...
- Fix-As-Fail ? There is an updated plug to fix leaking steer axle hubcaps.
- Repair notice
- Fix-as-Fail ? Outside air temperature sensor may fail for 567 and 579 built between 2015 and 2017.
- Non-Safety Campaign ? Outside air temperature sensor may fail for 567 and 579 built between 2015 and 2017.
- Non Safety Campaign: The circuit for the Trailer Hotline/Trailer Power may not be properly protected on...
- Fix-As-Fail: Repair for horizontal exhaust diffuser configurations with broken brackets or cracked diffuser.
- Fix-As-Fail: HVAC panel and temperature mode doors are failing for certain 579 and 567 models.
- Non-Safety Campaign: The Peterbilt SmartAir No Idle System may shut down during use
- Sample Customer Letter
- Sample Customer Letter
- Fix-as-fail: peterbilt 567/579 HVAC panel and temperature mode doors not functioning properly
- Fix-as-needed - smartnav software update is available for improvements to in-call audio, radio settings...
- Non-safety campaign: ten vehicles may have been built with misrouted wire loom on the steering column
- Fix-as-fail: an internal issue may cause some HVAC mode door actuators to fail
- Non-safety campaign: watson & chalin lift axle frame brackets with slotted lower mounting holes may...
- SmartNav 2.0 Hardware retrofit for quality validation and vehicle validation units.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2017 Peterbilt 567?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history