Tl*the contact owns a 2006 peterbilt 379. The correct manufacturer and model number of the vehicle were unavailable in the drop down menu. The contact stated that the vehicle was recently in the shop for shock load repair. The mechanic replaced the component for the shock load and the clutch, which totaled $5,000. On june 19, 2007, the fan dislodged and struck the radiator. This caused the antifreeze to leak and the pulleys that help operate the vehicle were dislodged. The vehicle sustained mild property damage. The contact was told after the fact that the fan clutch was under recall. However, the contact never received a recall notice. The vehicle has been to the dealer more than five times since the date it was purchased. The engine size and a valid VIN were unknown. The current and failure mileages were 180,000.
The worst 2006 Pierce Enforcer problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
- Engine1
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
- Engine1
Recalls 9
Electrical system: software
- What is wrong
- Pierce Manufacturing (Pierce) is recalling certain 2004-2018 Arrow XT, Dash, Enforcer, Impel, Quantum and Velocity aerial vehicles. The aerial device may unexpectedly rotate to the right when the ladder is being extended.
- Risk
- If the aerial device moves in an unexpected direction, the ladder may contact an object, such as a building or an electrical wire, increasing the risk of injury.
- Remedy
- Pierce will notify owners, and dealers will reprogram the aerial control module, free of charge. The recall began February 28, 2019. Owners may contact Pierce customer service at 1‑888‑974‑3723. Pierce's number for this recall is 74B295.
Recall number 19V022000 · Recall details
Power train: axle assembly: axle shaft
- What is wrong
- Pierce Manufacturing (Pierce) is recalling certain 1999-2013 Arrow XT, Dash, Enforcer, Quantum and Velocity fire trucks equipped with the electric All-steer rear steering option. The affected vehicles have rear steer axle shafts that were not properly heat treated.
- Risk
- Axle shafts that are not properly heat treated may break and potentially disable the vehicle, increasing the risk of a crash.
- Remedy
- Pierce will notify owners, and dealers will replace the rear steer axle shafts, free of charge. An interim notice was mailed on July 24, 2017. The recall began June 3, 2020. Owners may contact Pierce customer service at 1‑888‑974‑3723.
Recall number 17V348000 · Recall details
Suspension: front: control arm: lower ball joint
- What is wrong
- Pierce Manufacturing (Pierce) is recalling certain model year 2006-2007 Arrow XT, Dash, Enforcer, Lance, Impel, and Quantum vehicles manufactured January 1, 2006, to March 31, 2007. In the affected vehicles, tears in the ball joint protective boots may result in contamination of the ball joints.
- Risk
- The contamination may cause premature ball joint failure and the wheel to disengage from the control arm, increasing the risk of a vehicle crash.
- Remedy
- Pierce will notify owners, and dealers will inspect the affected vehicles for torn ball joint boots. Pierce will also evaluate the ball joint wear. Ball joints with an unexpected level of wear will be replaced. These repairs will be performed free of charge. The recall began on December 10, 2015. Owners may contact Pierce customer service at 1‑888‑974‑3723. Pierce's number for this recall is 74B267.
Recall number 15V615000 · Recall details
Equipment
- What is wrong
- Pierce Manufacturing Inc. (Pierce) is recalling certain model year 2000-2009 Enforcer and model year 2000-2010 Dash, Lance, and Arrow XT vehicles. While raising or lowering the cab as part of vehicle maintenance, the mounts on which the cab tilt cylinders pivot may fatigue and fail allowing the cab to fall until the safety catch activates.
- Risk
- If a person is in the path of the moving cab when a mount fails, the person may be hit by the falling cab, increasing the risk of injury.
- Remedy
- Pierce will notify owners, and dealers will affix new safety signs advising the operator to stay clear of the cab while it is being tilted, free of charge. The recall began on January 6, 2014. Owners may contact Pierce at 1‑920‑832‑3000. Pierce's recall number is 74B240.
Recall number 13V525000 · Recall details
Vehicle speed control: accelerator pedal
- What is wrong
- Pierce is recalling certain model year 1999-2008 arrow xt, dash, lance, and enforcer fire apparatus manufactured from june 22, 1999, through may 12, 2008, and equipped with an electronic accelerator pedal. After repeated use with excessive force, the accelerator pedal arm may bend and cause the pedal to move closer to the floor. If the pedal arm bends far enough, the pedal may contact the cab floor without warning and stick in the full throttle position.
- Risk
- If the accelerator pedal becomes stuck, the operator may lose control of the vehicle increasing the risk of a crash.
- Remedy
- Dealers will remove the existing accelerator arm and install a redesigned pedal arm free of charge. The safety recall is expected to begin on or about may 9, 2011. Owners may contact pierce at 1‑920‑832‑3000.
Recall number 11V255000 · Recall details
Steering
- What is wrong
- Pierce is recalling certain model year 1998 through 2008 arrow xt, lance, velocity, enforcer, impel, and dash custom fire apparatus vehicles manufactured from may 30, 1998 through november 25, 2008. The steering gear bracket may fracture and break. If this occurs the steering gear may detach from the vehicle.
- Risk
- Detachment of the steering gear will result in a loss of steering control that could cause a crash.
- Remedy
- Pierce will notify owners and dealers will install a new steering gear mounting bracket free of charge. The safety recall began on october 12, 2010. Owners are being instructed to inspect the steering gear bracket prior to each trip. The remedy to repair this defect is expected to begin no earlier the january 31, 2011. Owners may contact pierce at 1‑888‑974‑3723.
Recall number 10V423000 · Recall details
Service brakes, hydraulic: foundation components: disc: caliper
- What is wrong
- Pierce is recalling certain model year 2006 through 2010 arrow xt, dash, enforcer, impel, quantum, and velocity fire trucks manufactured from october 11, 2006 through june 16, 2010 and equipped with meritor wabco ex225 rear disc brakes and onspot automatic tire chains. The meritor wabco ex225 rear disc brake caliper may interfere with the onspot automatic tire chain brackets. This interference may restrict the caliper from full movement.
- Risk
- If this interference occurs, braking performance may be reduced without warning and a crash may occur.
- Remedy
- Dealers will install new automatic tire chain brackets. The new brackets provide additional clearance for the full actuation of the disc brake calipers. This service will be performed free of charge. The safety recall began in july 2010. Owners may contact pierce at 1‑920‑832‑3000.
Recall number 10V317000 · Recall details
Structure: body: bumpers
- What is wrong
- Pierce is recalling certain model year 2003 through 2009 custom contender, dash, enforcer, impel, lance saber, and velocity fire trucks manufactured from february 20, 2003, through march 27, 2009. These trucks may be equipped with drop-down fire hose trays mounted under the front bumper. The hose tray latch may accidentally open while the vehicle is in motion.
- Risk
- If this occurs the fire hose may drop to the roadway without warning. Potential injury to people and property may occur. The sudden hose deployment may also distract drivers trying to avoid the hose and a crash may occur.
- Remedy
- A new and improved latch design has been developed and a new hose box incorporating the new latch will be installed free of charge. The safety recall began on october 4, 2010. Owner may contact pierce at 1‑920‑832‑3000.
Recall number 10V300000 · Recall details
Engine and engine cooling: engine: diesel
- What is wrong
- On certain fire trucks equipped with cummins isl cm850 diesel engines, the connecting rods which transfer energy from the piston to the crankshaft are defective and can result in seizure of the piston pin. A piston pin seizure can result in a mission-disabling engine failure.
- Risk
- This condition could ultimately result in a loss of vehicle power (engine stall) increasing the risk of a crash.
- Remedy
- Pierce is working with cummins to replace the connecting rods free of charge. Owners may contact pierce at 1‑888‑974‑3723 or cummins at 1-800-diesels.
Recall number 06V179000 · Recall details
See all 9 recalls for the 2006 Pierce Enforcer
Defect investigations
Williams Controls Accelerator Pedals
On April 26, 2011, Pierce Manufacturing, Inc. (Pierce) notified the federal safety agency that it had decided certain Pierce fire trucks, manufactured between June 22, 1999, and May 12, 2008, contain a safety related defect. Pierce stated that certain model year 1999 through 2008 Arrow XT, Dash, Lance, and Enforcer vehicles contain a Williams Controls, Inc. (Williams Controls) suspended electronic accelerator pedal that may become bent after repeated use with excessive force. If the pedal arm bends far enough, the pedal may contact the cab floor without warning and stick in the full throttle position. If the accelerator pedal becomes stuck, the operator may lose control of the vehicle increasing the risk of a crash. This issue was assigned recall number 11V‑255.On May 12, 2011, RMD mailed an information request (IR) letter to Williams Controls requesting a list of customers who purchased the same or similar defective accelerator pedals.Williams Controls responded to RMD's IR letter on June 9, 2011 with a list those companies who purchased the same accelerator pedal.The list was submitted to the federal safety agency's Office of the Chief Counsel under a request for confidentiality.Williams Controls' response letter outlined several key points.First, it was noted that these pedals, item number 131507, are generic parts that are purchased by engineering staffs in accordance with their own specifications.According to Williams Controls, Pierce modified their purchased pedals post-purchase and this modification reduced the strength of the accelerator pedal assembly.Also, Williams Controls stated that it has, never had a warranty claim or other notice, other than by Pierce on their modified pedal, due to lever arm permanent deformation for item number 131507.While Williams Controls submitted a list of companies that purchased item number 131507, it noted that it did not sell the same or similar defective pedal assemblies to any company as the subject pedals were modified by Pierce.This Equipment Query is satisfied as, because of modifications not conducted by the pedal manufacturer, the same or similar pedals were not sold to other vehicle manufacturers and no other vehicles should be affected.However, RMD will continue to monitor recall activity to see if any similar issues are found in other manufacturers' vehicles.This EQ is closed.
EQ11003
Technical service bulletins for the 2006 Pierce Enforcer 39
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- All Roto Rays, Division of Eastern Fire Equipment Services, are warranted to the purchaser for 3 years...
- All Roto Rays are warranted to the purchaser for twenty-four months from the date of service against...
- Pierce has updated our inverter installation policy to require a sub-feed breaker box with inverters that...
- Pierce is communicating a material change to the ball joint boots used in applicable service kit PN 2742031
- This bulletin provides a procedure to update Telematics Control Unit (TCU) devices in Pierce custom...
- This bulletin provides a procedure for comprehensive update of the Command Zone (CZ) Telematics Control...
- This bulletin provides a procedure to update webpage and MQTT certificates in the Telematics Control Unit...
- The steering column clockspring airbag (Pierce PN 1799451) has become obsolete and will require...
- The previous bolt-in airbag and steering wheel design are now obsolete and will require replacement if the...
- Husky XP pressure transducer troubleshooting procedure for transducer-related performance concerns.
What 2006 Pierce Enforcer owners say
Most recent owner complaints, unedited.
Compare the 2006 Pierce Enforcer
Other model years
20062007
Questions about the 2006 Pierce Enforcer
Is the 2006 Pierce Enforcer reliable?
Owners have filed 1 complaint about the 2006 Pierce Enforcer, close to a typical Enforcer model year.
What is the most common problem with the 2006 Pierce Enforcer?
Engine and cooling, with 1 complaint.
How many recalls does the 2006 Pierce Enforcer have?
9 recalls, covering electrical system, power train and suspension.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2006 Pierce Enforcer?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history