Check a VIN

1992 Plymouth Sundance problems

The most common problem on the 1992 Plymouth Sundance is electrical system. It has 1.4 times the complaints of a typical Sundance model year.

Typical year1.4x the typical complaints
Owner complaints
49
Recalls
4
Service bulletins
32
Worst area
Electrical
Fuel economy
20-25mpg

The worst 1992 Plymouth Sundance problems

Ranked by number of owner complaints. Mileage and cost come from what owners wrote.

  • Electrical
    9
  • Airbags
    7
  • Suspension
    7
  • Engine
    5
  • Seats
    5

Problems by type

Tap a problem to see which part fails, at what mileage and in which other years.

  • Electrical
    9
  • Airbags
    7
  • Suspension
    7
  • Engine
    5
  • Seats
    5
  • Visibility
    5
  • Body
    3
  • Fuel system
    3
  • Acceleration
    2
  • Seat belts
    2
  • Steering
    2
  • Wheels
    2
  • Brakes
    1
  • Tires
    1
  • Transmission
    1

Recalls 4

Seats: front assembly: reclinerReported August 6, 1999 · 227,283 vehicles affected
What is wrong
Vehicle description: passenger vehicles. The lower seat back attaching bolt on the driver seat can fail and separate.
Risk
If the bolt fails while the vehicle is being driven, the driver could lose control of the vehicle, increasing the risk of a vehicle crash.
Remedy
Dealers will replace the lower seat back attaching bolt on the driver's seat with a higher strength bolt that includes a self locking nylon patch.

Recall number 99V212000 · Recall details

Seats: front assembly: reclinerReported May 10, 1997 · 148,000 vehicles affected
What is wrong
The lower seat back attaching bolt on the driver's seat can fail and separate.
Risk
If the bolt fails while the vehicle is being driven, the driver could lose control of the vehicle, increasing the risk of a vehicle crash.
Remedy
Dealers will replace the lower seat back attaching bolt on the driver's seat with a higher strength bolt that includes a self locking nylon patch.

Recall number 97V078000 · Recall details

Steering: steering wheel/handle barReported November 18, 1996 · 675,000 vehicles affected
What is wrong
The steering wheel armature stamping can crack and separate from the center hub attachment to the steering column.
Risk
If the steering wheel separates from the center hub attachment to the steering column, loss of control can occur increasing the risk of an accident.
Remedy
Dealers will inspect the steering wheel for armature cracks in the center hub attachment area. Any steering wheels showing cracks will be replaced. All other vehicles will have a reinforcement plate installed to prevent steering wheel separation in the event cracking occurs.

Recall number 96V229000 · Recall details

Steering: steering wheel/handle barReported February 14, 1992 · 20,000 vehicles affected
What is wrong
The zinc plating operation performed on the upper steering column shaft coupling bolt caused hydrogen embrittlement and breakage of the bolt.
Risk
Fractures of the upper steering column shaft couplingbolt result in a lack of coupling load on the shaft and loss of steeringcontrol.
Remedy
Replace the zinc plated bolt with a phosphate plated bolt.

Recall number 92V015000 · Recall details

See all 4 recalls for the 1992 Plymouth Sundance

Defect investigations

Throttle will not return to the positionOpened May 14, 1996, closed October 31, 1996

Uncontrolled engine speed condition results fro throttle shaft binding

PE96036

Safety blt latch operationOpened January 25, 1996, closed June 28, 1996

There is no summary currently available

PE96008

Steering wheel separationOpened September 26, 1995, closed November 13, 1996

After an extensive investigation and analysis, chrysler has identified the defect as a fatigue failure, origination in the heat affected region of the projection welds of the steering wheel hub to steering wheel armature attachment.the hub is the portion of the steering wheel assembly that connects it to the steering column shaft and is attached to the underside of the steering wheel assembly by 4 welds.if cracks develop in the heat affected region of the welds and propagate through the steering wheel armature to each of the welds, the steering wheel can separate from the hub.this is a slow progressive failure which normally occurs at high mileage.in some cases complainants have reported a looseness or wobbling of the steering wheel prior to separation.to remedy this defect, chrysler will inspect the steering wheels of the affected vehicles for cracks in the hub area.if any cracks are found, the steering wheel will be replaced.all other vehicles will have reinforcing plates installed which would prevent a steering wheel separation should cracking occur.

EA95029

Seat back bolt failureOpened May 31, 1995, closed May 19, 1997

The driver seat back can collapse without warning resulting in potential for loss of vehicle control.the lower bolt (one of two bolts that supports the seat back assembly) can fatigue and break

EA95017

Seat back failureOpened January 13, 1995, closed May 31, 1995

There is no summary currently available

PE95002

Technical service bulletins for the 1992 Plymouth Sundance 32

Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.

See all 32 bulletins for the 1992 Plymouth Sundance

1992 Plymouth Sundance fuel economy

Official EPA estimates in miles per gallon (MPGe for electric). Ranges cover trims that share the same engine.

EngineDriveCityHighwayCombined
2.2L 4‑cylFWD21-2326-2923-25
2.5L 4‑cylFWD18-2023-2920-23
3.0L 6‑cylFWD182621

What 1992 Plymouth Sundance owners say

Most recent owner complaints, unedited.

Filed Feb 21, 2003 · Suspension · 116,000 miles · NJ

Susepnsion defect on my 1992 plymouth sundance I was told by three mechanics that they are all defective and that car is not safe chrysler says they have no such knowleged of problems with this year car

Filed Jan 4, 2003 · Visibility · PA

I bought a new plymouth sundance in may, 1992. A few years later the paint cracked and began to peel off especially after a hard rain.I took the car to d&m chrysler where I bought it and the service dept said there was nothing they could do. I then took pictures of the car and sent a complaint to chrysler corp. They called me and said they spoke with the service dept at d&m and were told that the problem was caused by brushing snow off of the car. They refused to do anything. The car is all rusted now and today I noticed that the rear window is seperated from the roof at the top because the rubber won't stick to the rusted roof. There is about a 1/4" gap. I feel this has now become a safety issue as the rear window will most surely pop out if I am in an accident. I understand from various websites that this has happened to others, resulting in passengers being thrown from the car when the rear window gave way.

Filed Jan 4, 2000 · Electrical · CO · fire

A fire broke out inside vehicle while it was turned off and parked outside the house, and all window closed. Fire was extinguished by fire department. Fire department informed consumer that fire may have started from the steering column.

Filed Aug 6, 1999 · WI

I was wondering if there is any type of recall for my car the paint id peeling off all over and I have seen several mopar vehicals like this and was wanting to know if chrystler is going to do anything with them.

Filed May 26, 1999 · NY

The "black cherry" paint began to scratch from normal snow brush use. The paint continued to chip and crack, where I now have 30% of the paint chipped off and metal is exposed. I have seen many other sundance's of the same color with paint chipping prematurely. I now need to get my car repainted. No safety defect .

Filed Feb 3, 1999 · Tires · OH

Rear driver side tires continue to blow. 4 tire have failed, 3 blew out and 1 had steel belts showing.(dot 7790554330, dot7727481750 - goodyear - invicta, size p185/70r14).

Filed Nov 9, 1998 · Suspension · PA

A noise is coming from the rear end of the vehicle that sounds like metal rubbing against metal, cause unknown. Dealer can not identify the problem. Please give any further details.

Filed Sep 22, 1998 · Seat belts · MD

Rear seat belts do not allow for a convertible child safety seat to be installed rear facing in any of the rear seatbelts.

Filed Sep 3, 1998 · Suspension · GA

Vehicle vibrates all the time when in gear at a complete stop. Also shudders upon acceleration.

Filed Dec 5, 1997 · Body, Electrical · NY

Side panel of door crumbles easily. Nlm

Used buying checklistWhat to check on a 1992 Plymouth Sundance before you buy

Compare the 1992 Plymouth Sundance

Other model years

1990199119921993199419951998

Questions about the 1992 Plymouth Sundance

Is the 1992 Plymouth Sundance reliable?

Owners have filed 49 complaints about the 1992 Plymouth Sundance, 1.4 times a typical Sundance model year.

What is the most common problem with the 1992 Plymouth Sundance?

Electrical system, with 9 complaints. Next is airbags (7).

How many recalls does the 1992 Plymouth Sundance have?

4 recalls, covering seats and steering.

What gas mileage does the 1992 Plymouth Sundance get?

Official estimates for the 1992 Plymouth Sundance range from 20 to 25 mpg combined. The most efficient version (2.2L 4-cyl, FWD) gets 21-23 city and 26-29 highway.

Share your experience with the 1992 Plymouth Sundance

Tell other buyers what went wrong and what it cost. We review every report before it appears, and we never publish names, emails or VINs.

No names, contact details or links. Reports about a dealer or a person are not published.

VIN decoder

See the problems and recalls for an exact car

Buying a used 1992 Plymouth Sundance?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history
Is this car on a recall?Check VIN