Consumer was rear-ended by another vehicle while stopped. Other vehicle was traveling approximately 45mph. The collision caused consumer's vehicle to hit another car in front. The front driver and passenger seat belts released. Ts
1996 Plymouth Voyager seat belts problems
24 complaints (3% of all complaints for this car). 2 crashes reported.
- owner complaints
- 24
- of this car's complaints
- 3%
- crashes
- 2
- recalls
- 1
Which part fails
- Integrated child seat13
- Front: webbing3
- Front: retractor3
- Front: buckle assembly3
- Front: anchorage1
- Front1
At what mileage
Complaints by mileage at the time of the problem.
Plymouth Voyager seat belts problems in other years
Related recalls
Seat belts: integrated child seat
- What is wrong
- The bolts which secure the integrated child seat modules to the seat frame can break.
- Risk
- In the event of a vehicle accident, the child seat may not provide adequate protection to the occupant.
- Remedy
- Dealers will replace the integrated child seat module bolts.
Recall number 96V136000 · Recall details
Related investigations
Integrated child seat belt lockup
Odi continues to receive complaints alleging latching/retractor mechanism problems.chrysler's assessment of the problem indicates that owners of the vehicles are not adhering to the cleaning requirements for the seat.the seat appears to malfunction if crumbs of food or beverage residue accumulates on the latching tongue in thewell located between the child's legs.odi has 19 complaints of retract lockup.seven of these complaints report cutting the straps to remove the child.two of the seven consumers allege the child was choking.chrysler reports 60 owner/field reports which indicated 19 harnesses were cut to remove the children.additional information is needed to fully assess the safety consequence of the alleged defect and to evaluate the chrysler corporation's rational for not conducting a safety recall campaign.
SQ96016
Safety blt latch operation
There is no summary currently available
PE96008
What 1996 Plymouth Voyager owners say
Most recent owner complaints, unedited.
I believe there is a defect in the design of the "gen 3" seatbelt systems. The release button protrudes too far, and can be inadvertently bumped, causing the belt to unhook. I did not find this a problem until we had a baby and began using an infant carrier. 3 days in a row, our baby's seatbelt was mistakenly unhooked, first when I hooked my belt next to hers and didn't realize I'd bumped hers, then twice a dog sitting next to the infant seat stepped on the release button and unhooked the seatbelt. I believe that if the belts were designed to pass the "ball test" which chrysler refuses to use, these problems would not have happened. Chrysler maintains that the belts pass all required tests, and that is true. My concern is that my baby has travelled unrestrained (without our knowledge) because of a manufacturing detail that should be corrected before injury occurs that can be linked to this defect. There is currently a lawsuit under appeal in which a man was killed, but chrysler maintains that the belt did not fail; rather, the man was not wearing the seatbelt. His family argues that evidence exists to the contrary. At minimum, I want chrysler to offer belt designs that would not unhook so easily - as an option that customers could purchase - none are available at this time for my vehicle, and there are no plans for production. Best result would be recall. Nlm
Integreted child seat restraints retracted while the child was in the seat. Manufacturer will be notified.
The center bolt that holds the rear driver's seat shoulder strap has come unmounted, causing the shoulder strap to become inoperative. Dealer has been contacted.
When locking latch & buckle, does not hear click. Tongue of belt does not go in completely. Can pull on it & will not release. Will drive down the road & it will pop out of latch. Not secured properly.
Rear seat belts interior melted, causing them to stick.
A/c coil failed.
The seat belts on the built-in car seat will not retract, the more one tries to loosen it, the more it would tighten . Had to end up cutting the seat belts to get the child out of seat.
#ea97003, the straps on the integral part of the child safety seat lock up real tight, making removal of the child very difficult. This has happened about (4) or (5) times on seat by sliding door, about (3) times on the other seat, since purchase of vehicle in november of 1995. Vehicle not seen by dealer.
Integrated child safety seat tightened up instead of loosening up, continued to retract, owner had to cut shoulder restraint to remove child; dealer replaced entire seat; problem occurred with new seat, again, harness was cut to remove child.
Questions about the 1996 Plymouth Voyager seat belts
Does the 1996 Plymouth Voyager have seat belts problems?
Owners have filed 24 complaints about the seat belts of the 1996 Plymouth Voyager, 3% of all its complaints.
At what mileage do 1996 Plymouth Voyager seat belts problems start?
Not enough complaints include the mileage to tell.
Was there a recall on the 1996 Plymouth Voyager seat belts?
Yes, 1 recall: 96V136000. Check your VIN to see if your car still needs the free repair.
What year does the Plymouth Voyager have the most seat belts problems?
The Plymouth Voyager model years with the most seat belts complaints are 1992 (169 complaints), 1991 (102 complaints) and 1993 (83 complaints).
Other 1996 Plymouth Voyager problems
Engine 135Airbags 134Electrical 114Fuel system 107Transmission 88Visibility 80Brakes 62Acceleration 48Body 38Steering 33Locks 29Suspension 24Lights 20Seats 15Tires 6Wheels 3
VIN decoder
See the problems and recalls for an exact car
Buying a used 1996 Plymouth Voyager?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history