Vsc tracking lights and check engine
2001 Toyota Sequoia driver assistance problems
171 complaints (32% of all complaints for this car). Typical mileage when it fails: 125,000. 2 crashes reported.
- owner complaints
- 171
- of this car's complaints
- 32%
- typical mileage
- 125,000
- crashes
- 2
- recalls
- 0
Which part fails
- Automatic (ASC)6
- Automatic emergency braking1
At what mileage
Complaints by mileage at the time of the problem.
Toyota Sequoia driver assistance problems in other years
Related recalls
No recalls on record for this model year.
Related investigations
Yaw rate sensor malfunction
On June 14, 2016, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE16-006 to investigate 135 complaints alleging incidents of yaw rate sensor malfunctions resulting in unexpected Vehicle Stability Control (VSC) activations and steering pull while driving in model year (MY) 2001-2002 Toyota Sequoia vehicles.ODI identified a total of 958 incidents in complaints provided by Toyota or submitted to ODI by consumers.ODI conducted the following work to assess the alleged defect in the subject vehicles: 1) evaluated the design of the subject yaw rate sensor; 2) initiated vehicle testing and instrumentation; 3) performed failure analysis on subject components collected from the field; 4) analyzed field data for evidence of system faults; and 5) reviewed the performance of the subject system in fault simulations testing conducted by Toyota.ODI review indicated that an overwhelming majority of incidents are related to flashing VSC slip indicators on the instrument panel accompanied by warning buzzers and grinding noise or vibration caused by pulsed brake application to one of the front wheels.Yaw rate sensor malfunctions resulting in VSC brake applications is accompanied by a brief duration of longitudinal deceleration with minimal changes in vehicle speed and will not result in abrupt lane change or loss of vehicle control due to steering controllability.This preliminary evaluation is closed.The closing of this investigation does not constitute a finding that a safety related defect does not exist.For additional information, see the closing resume appendix and the investigation file for PE16-006.
PE16006
What 2001 Toyota Sequoia owners say
Most recent owner complaints, unedited.
While I was traveling on the highway at 70 MPH, the right front brake locked up momentarily and lurched the vehicle, the vsc and traction control light started flashing and a warning buzzer went off. After looking into things, there are known issues with the 2001 and 2002 toyota sequoia that cause this exact thing to happen to plenty of other people. I understand that there has already been an evaluation done on this matter and it was ruled that the severity of the issue does not warrant a recall. Why there is no recall being issued on the multiple failure points in the vehicle's system and people are required to spend thousands of dollars in repairs for parts and labor when the manufacturer's design didn't last? I purchased this vehicle for my father to feel more safe in, and that is the last thing that he feels while driving it. I am now required to drive our affected vehicle and have to be constantly paying attention so that the ABS system doesn't shoot me into another vehicle.
The vehicle stabilization control turns itself on at random times while driving. Has no correlation to driving conditions, type of roadway, or speed vehicle is moving. There is a beep and then a pull on the steering while a loud grinding noise and sensation occurs. It has gotten so bad, the car is not drivable because you cannot stop. Mechanic has tried to repair but is unable to root the cause. The last time was so bad, my husband thought he was going to crash on the highway exit ramp.
Was driving straight on a city street with no adverse weather conditions (rain, wet road, etc.) had accelerated up to about 35mph when suddenly the trac off, vsc, and skid lights illuminated (possibly flashing) and a warning beeping sound went off. There was a loud grinding metal on metal sound and the car was shuttering (vibrating). I immediately begin to depress the breaks, and while the car did begin to slow further than it already was, I did not feel like I could have come to a complete stop as if I had total control of the breaks. I looked ahead to see where I could pull into to get off the road when the lights/warning sound went off and the vehicle resumed normal operation. This was after about 5-10 seconds. I drove for a couple of minutes to a gas station to get gas. The vehicle seemed fine. I was only about 5 more minutes to home so I continued driving. During that 5 minute drive it happened a second time. The exact same behavior, I was already slowing down approaching a red light and was traveling probably 15-20mph when it happened. After about 5 seconds the behavior stopped and the vehicle resumed normal operation. I was only about 30 seconds from home. Continued home and haven't driven the vehicle since. This is a major safety issue to have your break system activate uncontrollable. It was terrifying at 35 MPH, I can't image what might happen at 65mph. A few seconds of research shows hundreds of other complaints of the same problem. Some people have reported pulling the fuse for the ABS system to disable it, because not having it is safer than your breaking system uncontrollably going off on you. This needs to be recalled by the manufacturer and fixed before there is a fatal accident!
Twice, once in nov. 2019 and again n mar,.2020, the electronic skid control has engaged without warning and without reason, causing me to nearly lose control of the car. Both occasions occurred on interstate 40 near raleigh , nc. The weather was clear and the road conditions were dry, solid (no sand or gravel) surface. When the system engaged at approximately 65 MPH, the vehicle was pulled to the right nearly uncontrollably, the ABS system engaged (grinding metal-on-metal sound0, and the engine speed was reduced. In addition, the trac and vsc icons lit up on the dash and the re was a beeping sound. This is a dangerous situation. Had there been a vehicle in the lane to my right, I could not have avoided hitting them. Fortunately, no other vehicles were involved and there was no accident, but this was purely luck. After the first event I took my vehicle to mark jacobson toyota in durham, nc on nov 14, 2019 ( I have the service receipt.) they stated that they "could not reproduce the problem" and said that they did a "zero point calibration." I have not had the vehicle serviced after the second episode since it happened just yesterday. A survey of the internet reveals multiple other first generation sequoia owners reporting the same thing, but there is no reported solution to the problem. The only "fix" that works consistently is to remove the ABS system fuse; hardly a solution, since it doesn't make sense to me to disable a critical automotive safety system. Nevertheless, given the severity of the problem with the ABS system energized, I can understand that disabling the ABS system is the lesser of two evils. I would be grateful for you help in finding a safe solution to this dangerous situation.
While driving into my driveway, on the freeway or on city roads, I suddenly hear beeping sound, grinding noise, momentary deceleration and then the vsc off and vsc trac lights in the instrument panel turns on. Sometimes this happens when the vehicle is idling and stationary. I am afraid that I might get into an accident because of the sudden deceleration especially when I am driving on the freeway on the way to the office 5 days a week. The local toyota dealership told me that there was a recall for this covering 2003 sequoia models but did not include 2001 sequoia models. I believe that toyota should include 2001 models in the recall before people get into accidents because of this problem.
Toyota rust issue on my 2001 toyota sequoia v8 sr5. Used to transport friends and family and children, but no longer safe due to excessive rust and inability to control the vehicle when slowing at higher speeds. Vehicle veers to right and left uncontrollably. Today, I almost sideswiped another vehicle on the highway. I was going around 60 MPH and slowed to exit and almost lost control of my vehicle and ended up in a ditch. I took it to a mechanic and was told the vehicle is unsafe to lift due to excessive rust. Recommended to have the frame replaced, but that's well beyond the cost I'm willing to pay. Research tells me that this is a consistent problem for these vehicles and toyota should do something about it -- if not pay to have new frames done or reimburse people for the many who have these issues. This vehicle has only 154,000 miles and is otherwise in immaculate shape and condition due to proper maintenance. This problem should be resolved quickly by toyota. I no longer feel safe driving this vehicle for the reasons I've mentioned. Excessive rust and inability to control a vehicle is not something I should have to deal with on a vehicle that has low miles for the make/model, and has been meticulously maintained. Please expedite so I can recover financially from this or have a vehicle that I can feel safe using again with my friends and family.
Driving down the road trac, vsc trac lights come on and the vehicle breaks hard and jerks the steering wheel to the right.
The frame is rust and I have problem sometime in stering sostn and the trction control the light is on sometime and I need turn off my SUV whait a minute and turn in for the light turn off
Driving 45mph on straight road the vehicle vsc engaged pulling hard to the right and decelerating quickly. I pulled over, called dealership and was told to drive it the 2 miles to dealership. Within 100' of dealership I crossed intersection and car suddenly decelerated, engaged the assistance again and I was almost struck by truck that swerved and almost hit pedestrian. Dealer said it was a yaw steering sensor. Part was unobtainable or possible within 8 weeks, and no after market parts available. Mechanic recommended vehicle not be driven. Toyota declared part obsolete. I researched and found this was already at the federal safety agency attention but that they closed the investigation. How is this acceptable?
Questions about the 2001 Toyota Sequoia driver assistance
Does the 2001 Toyota Sequoia have driver assistance problems?
Owners have filed 171 complaints about the driver assistance of the 2001 Toyota Sequoia, 32% of all its complaints, more than any other problem.
At what mileage do 2001 Toyota Sequoia driver assistance problems start?
The typical (median) mileage in owner complaints is 125,000 miles.
Was there a recall on the 2001 Toyota Sequoia driver assistance?
There is no recall for this problem on this model year.
What year does the Toyota Sequoia have the most driver assistance problems?
The Toyota Sequoia model years with the most driver assistance complaints are 2002 (252 complaints), 2003 (194 complaints) and 2001 (171 complaints).
Other 2001 Toyota Sequoia problems
Brakes 170Body 102Acceleration 101Steering 51Suspension 48Transmission 35Electrical 31Engine 21Locks 11Tires 9Airbags 7Wheels 7Visibility 5Seat belts 3Fuel system 2Lights 2
VIN decoder
See the problems and recalls for an exact car
Buying a used 2001 Toyota Sequoia?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history