2024 Toyota Tundra brakes problems

Filed Nov 6, 2026 · Brakes, Driver assistance · TX

at low speed the ADCC. FWRD Collison sensor was triggered and the brakes applied which cause the engine and engine powertrain along with the brakes to lose power and did not function as it was designed. The system was to slow and not enough power in engine to compensate for the TSS to activate and lost control temporary, and the object it was trying to avoid the collision with was a parked vehicle. My engines OIL PRESSURE gage at a low speed will at times go past 3/4- 4/4 (80-95%) and normal operation is 1/2 (50%) . I was driving on highway 90 headed east to work at 730am and while in the fast lane my truck SPLUTTERD and lost power and engine light and dash reading said POWER LOSE and my speed dropped to 55 estimate and would not throttle up. for a few seconds the brakes and engine sounded as it was shutting down and I was able to mange the truck to the slower lanes and made it to work at slow speed. The truck when sits for day at a time and when I decide to use it and start it up the truck SPLUTTERS and shakes for a brief moment until warms up. I have a huge gas efficiency problem and MPG use to read in the mid to high 20 now it reads mid 10 to 18 area. the truck is not meeting its efficiency as stated when purchased. the car hesitates and splutters if the throttle is used and the delay boggles the truck engine performance which can lead to loss of steering. The dealership says it was the airflow sensor yet they never changed it or replaced it and i now know that sense mile 6 of purchase the engine has been failing and Toyota refuses to fix or correct the engine issue or give false or misleading details and information and will not correct issues. TBE claim details and facts and images are ignored and denied by TBE. I can submit images of the dash and speed. As well as the Oil pressure gages which are obvious signs of the engine recall issues.

Filed Nov 5, 2026 · Brakes · OK · crash

My 2024 Toyota Tundra was involved in an accident on XXX. My son was driving this truck on dry city streets when a vehicle in front of him stopped. He applied the brakes hard and a warning message appeared on the dash stating “Parking Support Brake Malfunction Visit Your Dealer” just before impact. Also, he stated it seemed like the brakes weren’t working and the truck was sliding on the asphalt. Felt like the wheels had locked up. The parking support brake malfunction message keeps appearing when the ignition is turned back on from being off. Vehicle is currently at a c Caliber collision center being repaired. Caliber Collision in [XXX]. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Filed Oct 12, 2026 · Brakes, Engine · FL

Since about 5,000 miles I reported abnormal tire wear, alignment, harsh or delayed shifting, and braking problems to the dealer. Repair orders from January 2024 to December 2025 show about 7 dealer visits: rear brake work three times including a rear pad replacement around 22,000 miles and an earlier rotor replacement, two drivetrain/shifting visits (first was could not duplicate) plus recall 24TA02, a check engine light diagnosis, and moisture corrosion in the reverse lamps that disabled the backup lamps and camera. The dealer denied the reverse lamp repair as commercial use and I paid 957.37 in January 2025; Toyota later issued recall 25TA06 for the same water intrusion. My truck is also covered by engine stall recall 25TA14 (the federal safety agency 26V320), but the dealer reported the remedy was not available in December 2025. Losing the backup camera and lamps and an engine that may stall are safety risks, especially when towing and reversing a boat trailer.

Filed Aug 17, 2026 · Brakes · NY

The brake vacuum pump failed at 46k causing a loss of brake power. Low brake power park in a safe place and call the dealer.

Filed Aug 14, 2026 · Brakes · WV

Around 24,000 miles, the truck developed severe vibration when braking at highway speed slowing down from 65mph. The fix required the owner to replace front and rear rotors and brake pads due to warping.

Filed Jun 17, 2026 · Brakes, Engine · TX

While traveling on US Highway 95 between Lewiston and Riggins, Idaho, a 2024 Toyota Tundra TRD Pro with approximately 18,000 miles experienced a sudden loss of engine power while descending a mountain grade with multiple curves. The driver reported hearing abnormal engine noises immediately before the loss of power. At the same time, the brake pedal became extremely hard to depress and the vehicle did not decelerate as expected, requiring substantially increased braking effort. The vehicle was carrying family members and was traveling on a winding downhill section of highway adjacent to steep terrain. Due to the loss of power and increased braking effort, the occupants feared the vehicle would be unable to stop safely. Fortunately, a roadside pullout area was available, and the driver was able to steer the vehicle into the pullout and bring it to a stop without a collision. The vehicle was towed to an authorized Toyota dealership for inspection. The dealership diagnosed the vehicle with a catastrophic engine failure requiring engine replacement. The failed engine remains in the possession of the dealership and should be available for inspection. Approximately five days before this incident, the vehicle had undergone routine maintenance, including an oil change and inspection at a Toyota dealership. The vehicle had also previously been presented for brake pulsation concerns and other drivability-related complaints. The vehicle was returned to service and represented as operating normally. No collision occurred and no physical injuries were reported; however, the incident created a significant safety risk because the loss of engine power occurred while descending a mountain highway and the driver experienced substantially increased braking effort while attempting to stop the vehicle.

Filed May 30, 2026 · Acceleration, Brakes · AZ

[XXX], [XXX] PM. 2024 Toyota Tundra Hybrid (i-FORCE MAX, V35A engine), 36k miles, original owner. Clear, dry pavement, evening daylight. Exiting [XXX] westbound at [XXX] , I merged into the far right lane at the second light for a right turn. A vehicle was stopped ahead at the light. Traveling 15-20 mph, I applied the brake for controlled deceleration. Right foot squarely on brake, not touching accelerator. Vehicle did not decelerate as expected. For 3-4 seconds the brake felt unresponsive — pedal felt soft and loose, lacking normal firmness. I pressed the brake fully to the floor. A dashboard warning appeared: “gas and brake pedals are being pressed simultaneously.” I was not, and had not been, touching the accelerator. I then heard engine RPM increase audibly, consistent with an acceleration command, while my foot remained fully on the brake. I felt forward thrust working against my braking. The warning cleared and brakes engaged. Vehicle stopped approximately half a car length from the vehicle ahead, narrowly avoiding rear-end collision. Automatic Emergency Braking did NOT engage despite conditions clearly meeting its criteria — stationary vehicle directly ahead, my vehicle approaching at 15-20 mph with no observable deceleration for 3-4 seconds. No collision warning sounded; no auto-braking intervened. Notably, this same AEB has previously engaged falsely in benign situations (e.g., backing near low vegetation), suggesting reliability/calibration issues. Prior manufacturer notice: On [XXX] at 15,412 miles, I reported to Camelback Toyota, Phoenix (RO #[XXX], on file): “vehicle lurches forward going from reverse to drive (now more consistent)” — dispositioned by tech 10210 as “vehicle is operating to spec,” no diagnosis performed. Same RO documented “rattling in neutral/at stop” — dispositioned “unable to duplicate.” Toyota was on notice of throttle-response symptoms 21 months before this safety event. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Filed May 25, 2026 · Brakes, Electrical · TX

In the 2024 tundra if there is a camera misalignment for the 360 degree cameras or reverse cameras. It sets off a code that makes the trailer brake say disconnected even when connected. I took the vehicle in and had the cameras recalibrated then the brake worked. On my last trip pulling a 4,000 lb trailer the cameras came out of alignment so my trailer brake stoped working mid trip. This is a safety issue that can cause a accident.

Filed May 11, 2026 · Brakes · CA

Brakes start to make really bad noise at very slow speeds, specially when in reverse.

Filed May 8, 2026 · Brakes · OH

Parked on incline. Vehicle off. Vehicle automatically locked doors without operator intervention. Returned to vehicle. Vehicle beeped with associated lights flash when operator touched driver's extenal door handle. IMMEDIATELY the vehicle began rolling backwards downhill towards oncoming traffic. I was able to hop on running board, jump into driver's seat, press brake and start vehicle. The brakes engaged and the vehicle stopped before hitting oncoming traffic. Dealer found CODE P15AD87. Battery State Sensor (#28850-F4010) was replaced. Vehicle currently has 2,000 miles since repair on 01/23/26 without reoccurrence.