On 10/30/2026 I was driving the vehicle and the engine started vibrating. Then the engine died and would not restart. The dashboard lights up when trying to start, but the engine will not turn over. I had the vehicle towed to Auto Nation Toyota Gulf Freeway in Houston, TX.
Toyota Tundra won't start problems
50 of the 6,967 owner complaints about the Toyota Tundra describe won't start, most of them for the 2023 model year.
- owner complaints
- 50
- worst model year
- 2023
- typical mileage
- 62,000
By model year
Often reported together
Fuel pump 14Knocking 10Stalling 8Check engine light 8Engine failure 6Loss of power 5Misfire 2Fire or smoke 2
Trouble codes mentioned
P2440 1
What owners say
Possible issue with the safety of others: My tailgate for my 2025 Tundra crewmax came opened (unknown to me) and contents of my Truck bed dumped onto the road. The incident as it happened. I was backed into a parking spot, truck was off, when I got in my remote was in my pocket and the truck would not start. So I pulled the remote out of my pocket and put it in the console. The truck would then start. I wasnt observant to the dashboard warnings if they were there. While driving home I heard all my bed contents fall out. Fortunatly I noticed it before it affected anyone. The best I can figure is that other objects in my pocket may have pushed the tailgate button. Since I was backed in and the tailgate lowering is so quiet, I didnt hear it or see it. I feel unsafe now to carry anything in my truck bed without backup protection. I would rather have a manual tailgate and totally disable the auto function but as I understand it, only the auto close mode can be disabled. I have not presented this to the dealership yet nor have I tried to duplicate the issue yet.
The fuel pump and the fuel pump control module system failed. Before the failure, I drove my 2019 Toyota Tundra on XXX from [XXX] to [XXX] with no prior check engine light warning. It was parked for all 3 days at a campground in [XXX]. However, on XXX the vehicle would not start. The truck ignition was moved to the RUN position and then the check engine light came on, which was the first notification of a potential problem. So, I attempted to start the vehicle, there was a crank but not a start incident. The ignition was moved back to the OFF position. I'm also an experienced mechanic, so I lifted the hood to diagnose the issue and search where the malfunction was occurring. I inspected the battery, all the fuses, the relays controlling the fuel pump, and the fuel pump control module. Using a Voltmeter Tester, the battery had a full charge. The relays and the fuses were also replaced with no success in starting the vehicle. The fuel line was disconnected from the fuel rail so I could verify if fuel was getting to the engine. The truck ignition was again moved to the RUN position and then the Start Position with NO success of fuel getting to the fuel rail. The vehicle was then towed to a local auto shop and the problem has been reproduced only by Crawford Auto Repair shop in [XXX]. The auto mechanic mentioned two error codes were presented: 1. The fuel pump 2. The fuel pump control module. Thankfully, there was no immediate risk to my family's safety but it could have occurred while driving back through the [XXX] mountains on our way home. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
On August 21, 2026, I was driving South on US HWY 281 going approximately 70 miles per hour in the middle lane. Approximately near mile marker 540, the engine shut off and the truck rapidly decelerated. I luckily navigated the truck off the highway in heavy traffic. I attempted to restart the engine and it would not start. I had the truck towed to Shottenkirk Toyota and they diagnosed it as failed main crank bearings.
On XXX6, while driving on the highway at approximately 89 mph and 36,714 miles, the engine misfired and the vehicle began shaking. The check engine light started flashing and a "reduced power, visit dealer" message appeared, along with a loss of motive power. The vehicle was taken to an authorized dealer on XXX at 37,032 miles. The dealer's repair order documents stored diagnostic trouble codes for random misfires, and states that freeze frame data confirmed misfires on cylinders 3, 4 and 5 at 89 mph and 2700 rpm in direct injection mode. Despite this, the repair order was closed as "no issue found." No repair and no further diagnosis was performed. The dealer stated the condition could not be duplicated after driving the vehicle and idling it for about an hour. The vehicle is subject to an open safety recall for machining debris in the engine (the federal safety agency 25V767, manufacturer 25TB14), for which no remedy is available. The recall summary lists engine knocking, rough running, no-start and loss of motive power as symptoms, and instructs owners experiencing symptoms to contact their dealer. When contacted, the dealer stated the manufacturer is still developing a remedy and that the vehicle can either wait indefinitely or be picked up as is. The defect remains undiagnosed and unrepaired. The vehicle is available for inspection. The safety concern is a sudden loss of motive power at highway speed, which is the same risk identified in the manufacturer's own recall filing. No remedy has been made available more than ten months after the recall was filed. Video of the failure as it occurred, showing the check engine light flashing and the loss of power: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
2023 Toyota Tundra CrewMax SR5 4x4, VIN [XXX], approximately 79000 miles. This vehicle has two open safety recalls. Both show "Recall Incomplete, remedy not yet available" on the federal safety agency's VIN lookup as of XXX the federal safety agency 25V322 (Toyota 25TB06) was filed XXX for moisture intrusion causing both reverse lamps to fail. Toyota's remedy notice estimated that the remedy would begin to be available in the fourth quarter of 2025. That estimate is now approximately nine months past and no remedy is available for this VIN. the federal safety agency 25V767 (Toyota 25TB14) was filed XXX for machining debris causing number one main bearing failure, with symptoms including engine knocking, rough running, no-start, and loss of motive power. Interim notices were mailed XXX. The remedy has been postponed and remains unreleased for this VIN, with rollout phased by vehicle age. I am filing because the manufacturer has been unable to provide a remedy for either recall within a reasonable time. I have owned this vehicle since XXX and have been unable to obtain repair for a known safety defect for more than fifteen months on the first campaign. I am requesting that the federal safety agency record this delay and address the manufacture's remedy timeline. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Recall # 25V767 has been open since November 6, 2025 and the remedy is not yet available. There is a possibility that certain machining debris may not have been cleared from the engine when it was produced which can lead to potential engine knocking, engine rough running, engine no start, and/or a loss of motive power. I am concerned about this being a major safety issue and also concerned about the fact that the recall has been open since November 2025 and there is still no remedy.
Engine shutdown while driving (was towing a travel trailer at the time) and after coasting to a stop the engine would not start. After 10 minutes the engine would start, but had loud knocking. My 2024 Tundra only had 31,726 miles and had to be towed to the dealership. Seems to be the known engine issues with the redesigned v6 engine. Tundra has been in the dealership for 4 weeks and was told it will require engine replacement, but do not know when the new engine will be shipped. While Toyota will perform the replacement free of charge, based on the hundreds of thousands of Tundra's being recalled for this very issue, I no longer trust this engine design (replaced or not).
was waiting for the traffic light to turn green. Vehicle in drive with foot on brake. the traffic light turned green, I took my foot off the brakes and pushed on the accelerator. Nothin happened. I saw another vehicle approaching at a high rate of speed behind me so I continued to mash on the accelerator. right before being hit by the car behind me my vehicle lurched forward a few feet then stopped again. I looked at the dash display and saw a "Hybrid System Malfunction" warning. Because of the traffic situation/location it was not safe to just sit in the road so I continued to pump on the accelerator. each pumped moved the vehicle forward a couple of feet. I did not turn of the engine because I was unsure what would happen so I continued to do that for about a mile or so until I could get to a safe place to pull over. during this time, I almost got rear-ended and side-swiped several times. Once stopped I attempted to start the vehicle several times and got the "Hybrid System Malfunction" display and the vehicle would not start. I waited for about an hour with the vehicle off and restarted the engine. I stayed off the freeway and took backroads to the closest dealer service center where it is currently located. When I dropped it off the service rep said he hasn't seen anything like this. Prior to this incident I had no issues with the truck and it was last serviced by the dealership on March 4, 2026.
Vehicle has two open Toyota safety recalls that have remained unresolved for over a year. the federal safety agency campaign 25V322 (manufacturer no. 25TB06) covers reverse lamp assembly corrosion. the federal safety agency campaign 25V767 (manufacturer no. 25TB14) covers a V35A engine manufacturing defect where leftover machining debris can damage the main bearing, leading to engine knocking, rough running, no-start, or loss of drive power while driving. No engine symptoms have occurred to date. However, the vehicle is used for rideshare and delivery work, meaning passengers and cargo are regularly on board while this known defect remains unremedied. The dealership stated it could not address the engine recall and directed me to Toyota corporate. Toyota corporate opened a case and confirmed no remedy is currently available for this recall. The vehicle has not been inspected by the dealer or manufacturer, as no repair or inspection procedure has yet been provided to perform one. No warning lamps or dashboard messages have been observed. Vehicle is available for inspection upon request. Concern: a known crash-risk engine defect (loss of drive power) has been acknowledged by the manufacturer for over a year with still no completed remedy, while the vehicle continues to be operated commercially with passengers.
Related recalls
Engine and engine cooling: engine: hard parts internal/mechanical
- What is wrong
- Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024 Tundra vehicles equipped with a V35A engine. Debris from the manufacturing process may contaminate the engine and cause a main bearing to fail, which can result in an engine stall and loss of drive power.
- Risk
- A loss of drive power increases the risk of a crash.
- Remedy
- Dealers will perform an inspection on the #1 main bearing using vehicle inspection software and drive data, and if necessary, replace the engine. Repairs will be performed free of charge. Interim letters notifying owners of the safety risk were mailed July 23, 2026. Additional letters will be sent once the final remedy is available. Owners may contact Toyota's customer service at 1‑800‑331‑4331. Toyota's numbers for this recall are 25TB14 and 25TA14. This recall expands previous the federal safety agency recall numbers 24V381 and 25V767.
Recall number 26V320000 · Recall details
Engine and engine cooling: engine: hard parts internal/mechanical
- What is wrong
- Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2024 Toyota Tundra, Lexus LX, and 2024 Lexus GX vehicles equipped with a V35A engine. Debris from the manufacturing process may contaminate the engine and cause the main bearings to fail, which can result in an engine stall and loss of drive power.
- Risk
- A loss of drive power increases the risk of a crash.
- Remedy
- Dealers will perform an inspection on the #1 main bearing using vehicle inspection software and drive data, and if necessary, replace the engine. Repairs will be performed free of charge. Owner letters were mailed August 28, 2026. Owners may contact Toyota's customer service at 1‑800‑331‑4331. Toyota's numbers for this recall are 25TB14 and 25TA14. Lexus' numbers for this recall are 25LB07 and 25LA07. This recall expands previous the federal safety agency recall number 24V381.
Recall number 25V767000 · Recall details
Engine and engine cooling: engine: hard parts internal/mechanical
- What is wrong
- Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Lexus LX600 vehicles equipped with a V35A engine. Debris from the manufacturing process may contaminate the engine and cause the main bearings to fail, which can result in an engine stall and loss of drive power.
- Risk
- A loss of drive power increases the risk of a crash.
- Remedy
- Dealers will replace the engine assembly, free of charge. Owner letters were mailed between December 17, 2024 and February 19, 2025. Owners may contact Toyota customer service at 1‑800‑331‑4331. Toyota's numbers for this recall are 24TB07/24TA07 and 24LB04/24LA04.
Recall number 24V381000 · Recall details
Engine and engine cooling: exhaust system
- What is wrong
- Certain pickup trucks equipped with both vehicle stability control (vsc) and the trd dual exhaust systems. The trd dual exhaust system met all clearance specifications on models without vsc, however the driver's side exhaust located in a position where contact between a brake line found only on vehicles with vsc and the trd exhaust pipe might occur.
- Risk
- In this condition, the exhaust pipe flange may rub against the right rear brake line, which could cause brake fluid leakage. This could lead to an increase of vehicle stopping distance, which could result in a crash.
- Remedy
- Dealers will inspect and, if so equipped, will replace the trd dual exhaust system free of charge. During this replacement, the dealer will also inspect the specific brake line to assure it has not been damaged and replace it if necessary. The recall began on may 31, 2005. Owners should contact toyota at 1‑800‑331‑4331.
Recall number 05V123000 · Recall details
Questions about the Toyota Tundra won't start
Which Toyota Tundra years have won't start problems?
The model years with the most reports are 2023 (9 complaints), 2024 (8 complaints) and 2018 (4 complaints).
VIN decoder
See the problems and recalls for an exact car
Buying a used Toyota Tundra?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history