2008 Yamaha FJR1300 problems

Filed Apr 12, 2022 · Electrical · 32,000 miles · KS

The contact owns a 2008 YAMAHA FJR13AXB. The contact received notification of the federal safety agency Campaign Number:11V338000 (Electrical System) however, the part to do the recall repair was not yet available. The dealer was made aware of the issue. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact did experience a failure. Parts distribution disconnect. The failure mileage was 32,000

Filed Sep 19, 2020 · Brakes · 12,045 miles · CA

The rear brake (foot pedal) continually loses pressure, while the front brake remains in good operating order / with good pressure. Once pressure is lost, the foot pedal feels mushy, resulting in no braking power; pumping the foot pedal repeatedly may engage the brake, but only slightly. I've taken the motorcycle in to the dealership twice and the technician cannot find the cause or source of the pressure loss (all seals appear in good working order and there is no apparent leaks). In one instance, the technician noted that he had to flush the brake system several time to evacuate an accumulation of air. In both instances, flushing the brake system restored full braking capabilities. I have researched this problem on the internet and found many blog entries describing the same problem, with no determinable cause. Dates of occurences: 04/23/2015 08-01-2020

Filed Dec 6, 2014 · Electrical · 45,000 miles · WA

I went to start the bike and nothing happen. Everything was in good standing. I think the ground harness is not working properly or not design properly.

Filed Apr 13, 2012 · Wheels · 2,900 miles · MN

Brand new bridgestone front motorcycle tire size 120/70 zr 17. Brand battlax bt-021. Motorcycle bought new from dealer with standard issued tires in august 2010. Front tire worn so badly at 2900 miles had to replace it. Replaced by dealer with same exact new bridgestone tire. That tire has 4300 miles on it and is worn so bad I cannot drive it anymore. Center tip of the tire is fine, the rest of the tire is bald and looks like a sander was taken to it. Feels like riding on a tightrope. Dealer inspected front end alignment and found no issues. Roads I travel are mostly flat and very few corners. I ride within posted speed limits. I contacted bridgestone headquarters in nashville tn in feb 2012. Spoke to a man a few times and he checked into the problem. I told him I would send the tires to him for personal professional inspection. He declined to look at them. He got back to me a few days later and said, "sport touring bikes go through a lot of tires." I told him the tires are dangerous and my life is at risk to serious injury or death due to this product. Again, no help from this company representative. I feel that the bridgestone tire company has a dangerous product that should be recalled. The complaint is widespread on the forums. A front motorcycle tire when used properly should last more than a few thousand miles. I would like to formally register a complaint against bridgestone tire. I deem this particular model of tire to be both dangerous and costly to the consumers who purchase this product. If one life or accident can be prevented by a recall on this motorcycle tire, it will be worth my efforts to stand up against this inferior product. Thank you.

Filed Feb 24, 2012 · Transmission · 100 miles · VA

This has been a problem since my motorcycle has been new. When I stop my motorcycle in 2nd gear, it will not shift into 1st gear unless I rock it a little after stopped. It will go into neutral, but not into 1st gear. This is extremely dangerous, especially if on a steep hill. I have reported it to the yamaha dealer who told me I needed to break in the transmission. After 3700 miles, it is still doing the same thing. I cannot not put the motorcycle into 1st gear when stopped without rocking it. I contacted yamaha technical support and they told me that I need to shift into 1st gear before I stop. I told them that this is not always safe or possible, especially when making a sudden stop. Their response is that this is the way the motorcycle is designed. I informed them that if that is so, it is a serious design flaw that creates an unsafe situation. Their response is that I have to shift into 1st gear before I stop; the problem is operator error if I do not. They are aware of this situation and do not see it as a problem. I have spoken with other fjr owners who do not have the same problem. I have ridden many different motorcycles over the past 45 years and have never experienced this situation before. Based on the information I received from yamaha, it is a problem the technical department is aware of that exists in some yamaha fjrs. It seems to be a transmission defect or design flaw that is producing an unsafe condition that they do not see as their responsibility to remedy..

Filed May 15, 2011 · Electrical · 14,097 miles · LA

While riding my motorcycle I experienced a sudden shutdown of the engine and lighting while riding in traffic. Investigating I found a failure on an electrical connector in the wiring harness which overheated. There was no warning. Researching on the internet I have found this to be a common problem with my yamaha fjr1300 motorcycle.

Filed Oct 6, 2009 · Transmission · 200 miles · NM

My grandson was riding his newly purchased yamaha raptor 250 atv. He was traveling at about 40 MPH, when the motor fell out caused by all four motor mounts breaking away from the frame, this caused the chain to come off of the sprocket, bending the sprocket damaged the chain, seized up the bike as the chain was wrapped around the axle doing much damage to the rear axle, in turn it threw my grand son over the handle bars, damaging his helmet and cracking his ribs and bruising him badly. I contacted the local dealer , they referred me to customer service of yamaha, they ask me to take the bike to the dealer and to have the dealer take pictures, this was done ( 11pictures ) were sent, that was six weeks ago. Neither the dealer or myself have heard from yamaha, and neither have we been able to contact them. I paid $4500.00 dollars for this bike and all I have is a bike totally unusable. 2008 yamaha raptor 250model yfm, the model # listed below is incorrect as their is no option to add the correct one.

Filed Jun 2, 2009 · Electrical · 500 miles · MN

Tl*the contact owns a 2008 yamaha fjr1300 motorcycle. The contact received a recall notice for the federal safety agency campaign id number 09v002000 (electrical system:ignition:switch). The authorized dealer was notified, but the recall repair has not been performed due to a massive national back order for the necessary part. The part will be unavailable until july 21, 2009. The contact was placed on a waiting list. The technician recommended that the vehicle not be driven due to the safety risk involved. The failure and current mileages were 500. Updated 07/01/09 *bf updated 07/06/09.

Filed May 20, 2009 · Electrical · 1,700 miles · MA

Main ignition switch wire connection may overheat due to electrical resistance. May become hot enough to melt the solder connecting the wire to the main switch.

Filed Apr 20, 2009 · Visibility · 3 miles · NJ

Tl*the contact owns a 2008 yamaha fjr1300 motorcylce. The contact stated that the rearview mirrors do not extend far out enough to view the traffic in the rear. The manufacturer will be notified. The vehicle is brand new and was purchased on march 14, 2009. The failure mileage was 3 and current mileage was 250.