2019 BMW 230I technical service bulletins
61 technical service bulletins and manufacturer communications cover the 2019 BMW 230I, including 3 warranty extensions.
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- The EVAP systems purge (vent) valve limited warranty for defects in materials and / or workmanship has...
- The EVAP systems purge (vent) valve limited warranty for defects in materials or workmanship has been...
- Evap system purge (VENT) valve ext ltd wty (ELW) 15/150
- While driving on rough roads, a cracking sound is heard coming from the headliner area.
- The electrical system of BMW vehicles has been subject to an ongoing development process over the last few...
- At low outside temperatures (below 40 degrees F) and slow driving speeds (i.e. when parking,...
- The steering wheel heating takes a long time to achieve the desired temperature.
- Pressure control valve (PCV) extended ltd wty 15 years/150,000 miles
- The paint finish on the door jamb (above the door striker) is scratched due to the inner door cavity...
- After programming the head unit (HU-H2), activating the FSC (German word Freischaltcode) Enabling Codes...
- The 3G network in the US has been shut down
- After an automatic engine start (MSA start), the transmission intermittently goes into the Park "P" or...
- Due to a production error, the telematics control units were delivered without an IMS configuration.
- The driver and/or passenger side floor mat/carpet are soaked during/after a car wash.
- The Headunit High (HU-H), also called NBT, began replacing the Car Information Computer (CIC) on certain...
- Component and Issue Specific Limited Emission Warranty Extension
- Component and Issue Specific Limited Emission Warranty Extension
- The quick disconnect coupling on the cylinder head coolant vent line could break at the cylinder head
- Customer may complain of reduced air flow when the air conditioning system is operated for an extended...
- Rattling noises heard from vicinity of glove box.
- Groaning, scraping, or squeaking noise coming from the steering wheel area in the interior of the...
- On rare occasions during an engine oil service, the BMW Original (Genuine) engine oil filter insert is...
- Groaning, scraping, or squeaking noise coming from the steering wheel area in the interior of the vehicle,...
- The discontinuation of 3G cellular communication for Combox, TCB 3G and ATM 3G (Telematics ControlModule)...
- B58 engine: engine oil filter removal procedure and tools
- Groaning from the side windows
- Telematics unit deactivation due to 3G cellular technology discontinuation
- Telematics unit retrofit to 4G cellular technology
- Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal...
- Washer Fluid Reservoir Rattles While Driving on Rough Roads: Rattling noises heard from vicinity of glove box.
- Combustion control valve lift at idle
- Bmw maintenance booklet and OEM tire manufacturers' warranties
- ?A/c cooling intermittent reduction of air flow:
- Paint on the b-pillar is scratched/damaged
- Low Washer Fluid Warning Light is illuminated when the Washer Fluid Tank is Full: Low Washer Fluid Warning...
- Noises from the fuel tank at idle
- Ticking noise while cornering without the brakes applied
- Vehicle does not start battery totally discharged
- Navigation system - reporting missing or incorrect roadmap data
- B58C and B58M engines engine oil filter insert is difficult to remove - removal
- Tank ventilation and mixture control faults stored in the dme
- CCM DISPLAYED "INCREASED BATTERY DRAIN" CAUSED BY CONTROLLER: A yellow CCM (Check Control Message) ID 415...
- Dme fc 21A02D - combustion control: valve lift at idle
- Ticking noise while cornering without the brakes applied
- Tailgate unintentionally opens
- Ccm displayed "increased battery drain" caused by controller
- Automated activation of navigation system during pdi/QC1
- Connecteddrive/bmw assist system diagnosis information
- Engine oil filter insert is difficult to remove - removal
- Fault Code 1D2008 Stored in DME: This Service Information Bulletin (Revision 5) replaces SI B12 33 14...
- CCM DISPLAYED "INCREASED BATTERY DRAIN" CAUSED BY CONTROLLER. A yellow CCM (Check Control Message) ID 415...
- Side panel rear light housings: ltd wty ext to 10 years without mileage limit
- Sos malfunction displayed
- Engine does not start below freezing temperatures
- Convertible top creaking noise
VIN decoder
See the problems and recalls for an exact car
Buying a used 2019 BMW 230I?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history