In a left-hand turning lane of a city street, intending to make a left turn on a green light at a controlled intersection, my car was stationary at idle & in neutral at a complete stop until on-coming traffic cleared intersection. From a dead stop in 1st gear (stick shift), I started a left turn - suddenly, unexpectedly & unintentionally the vehicle rapidly & uncontrollably accelerated to 30 to 40 MPH. I clutched out of gear, slammed on the breaks, but could not slow the vehicle. The vehicle subsequently jumped a curb and collided head-on with a telephone pole. Seat belt worked and air bag deployed. Car was towed. I was transported by ems to an emergency room to evaluate for injuries.
The worst 2013 BMW 335XI problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
- Acceleration2
- Airbags2
- Brakes1
- Driver assistance1
- Engine1
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
- Acceleration2
- Airbags2
- Brakes1
- Driver assistance1
- Engine1
- Fuel system1
- Seat belts1
- Suspension1
- Tires1
- Wheels1
Recalls 1
Exterior lighting
- What is wrong
- BMW North America, LLC (BMW) is recalling certain model year 2012-2015 320i, 320xi, 328i, 328xi, 335i, 335xi, and ActiveHybrid3 vehicles manufactured October 20, 2011, to June 22, 2015, 2014-2015 328xi Sports Wagon vehicles manufactured March 21, 2013, to March 17, 2015, 2014-2015 328d, 328xd vehicles manufactured June 28, 2013, to April 21, 2015, and 2014-2015 328xd Sports Wagon vehicles manufactured July 5, 2013, to April 21, 2015. The affected vehicles may have been programmed with new software that inadvertently makes the front side marker lights inoperative in conjunction with the parking lights or the headlights. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
- Risk
- If the side marker lights do not illuminate, the vehicle may be less visible at night, increasing the risk of a crash.
- Remedy
- BMW will notify owners, and dealers will upload revised software to correct the issue, free of charge. The recall began on October 7, 2015. Owners may contact BMW customer service at 1‑800‑525‑7417 or by email at [email protected].
Recall number 15V520000 · Recall details
See all 1 recalls for the 2013 BMW 335XI
Defect investigations
Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
EA21002
Technical service bulletins for the 2013 BMW 335XI 9
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- The basic conditions for initializing the power windows are not met.
- The electrical system of BMW vehicles has been subject to an ongoing development process over the last few...
- Butt connector for repairing a plug connection
- Visual Inspection of Brake discs/Rotors for new car deliveries
- The engine?s intake charge-air duct limited warranty extension to 10 years/120,000 miles applies to...
- Shipping specific non-deployed vehicle safety devices to lighting resources, llc
- The customer complains of rattling noises from the rear window when driving on rough roads.
- Bmw:some bmw models may or may not display airbag warning light
- Bmw: on some vehicles, when starting, low beam, with 0552 option, would briefly flashes, due to a faulty...
What 2013 BMW 335XI owners say
Most recent owner complaints, unedited.
Door sometimes does not unlock from the inside. Normally a double pull on the interior handle will unlock and open the door. But sometimes it will not unlock (the handle feels stuck and can't be fully pulled) and requires pressing the electronic central locking switch. Not safe if there is an electrical failure. I have a video but cant upload it.
I was rear ended from a dead stop by a vehichle around 50 MPH and my airbags malfunctioned. I had smoke coming from the dash but no actual air bag protected me by coming out. The seat belts are locked up and no longer work. The car then forced me to leave it in the middle of the road because it does not allow you to push it or put it into neutral in any fashion. This also forced it to be harmful to the vehicle to be put onto the tow truck because all wheels were locked up.
Tl* takata recall. The contact owns a 2013 bmw 335xi. The contact received notification of the federal safety agency campaign number: 16v071000 (air bags). The part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Vin tool confirms parts not available.
Every since I purchased the car, new off the lot, the brakes have squealed while coming to a stop or slowing down to stop. The noise is such a high pitch that other cars look at me like nails on a chalk board. I have brought to the attention to bmw service center at least 6x while the car is being serviced and contacted bmw USA, only to be told that it is normal for this car to make this noise. This is unacceptable, at 22,000 miles it is beyond acceptable. One service center cleaned the brakes, but all will not replace any components, such as rotors or brake pads. I guarantee that if the car was out of warranty, I would get them repaired for a sizable cost. Another service center, said that if enough customers present the problem to bmw USA they may issue a service bulletin to repair the problem. To me that is an admission if an issue. I have exhausted all outlets and decided to file a formal compliant here with no expectations.
Tl* the contact owns a 2013 bmw 335xi. The contact stated that while driving 20 MPH, the front passenger's side of the vehicle collapsed without warning. The drive slow warning light illuminated after the failure occurred. The vehicle was taken to the dealer who stated that the contact had struck something. The manufacturer was notified. The vehicle was not repaired. The failure mileage was 15,000.
Loss of power, the car will not rev past 3,000 rmp and no fault codes show on dash.
New car (2months), bmw335xi (excellent), delivered by bmw france with 4 runflat 18' 225/45 goodyear (in france the client cannot choose the trade mark of the tyres during ordering). After only 4500 kms, bubbles on the external wall of the tyres (anterior and posterior right). One week later (strict speed limitation to 80 km/h), bubble and external injury on the external wall of the left anterior tyre. No shock, no whole on the road, no impact on wheels but spontaneous bubbles. No perception when driving, no signal of dysfunction on the electronic board until the left tire rise down the pressure and was definitely out of order. 3 out of 4 tyres out of order on a new car (<2 months) after only 4500 kms!!!! This is the reverse of technical progress. This is a very severe and serious problem with safety consequences that engage life of bmw clients. This canot be attributed to bmw but to either tyre manufacturer or agencies dvoted to tyre homologations.
Auto start stop failure on automatic trans vehicle. Second time the engine has stalled and dropped into neutral in traffic while the auto start stop feature is active. Rather than starting back up as normal the engine throws an error code and forces the driver to manually turn the car off and back on again. Both incidents were at a stop light turning red to green.
Compare the 2013 BMW 335XI
Other model years
Questions about the 2013 BMW 335XI
Is the 2013 BMW 335XI reliable?
Owners have filed 9 complaints about the 2013 BMW 335XI, fewer than a typical 335XI model year.
What is the 2013 BMW 335XI year score?
The 2013 BMW 335XI scores 79 out of 100 (average). The score compares it with the other model years of the BMW 335XI: 75 is a typical year, 50 means twice the usual complaints, and serious complaints and recalls lower it.
What is the most common problem with the 2013 BMW 335XI?
Acceleration and speed control, with 2 complaints. Next is airbags (2).
How many recalls does the 2013 BMW 335XI have?
1 recall, covering exterior lighting.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2013 BMW 335XI?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history