2014 Chrysler 200: engine stalls while driving

Filed May 7, 2025 · Electrical, Engine · 106,000 miles · NJ

The contact owns a 2014 Chrysler 200. The contact stated that while driving 50 MPH on the highway, the vehicle stalled, and the vehicle turned off independently. The contact was able to coast over to the right side of the road, and attempted to restart the vehicle, and the vehicle started as intended. No warning light was illuminated. The vehicle was taken to AAA where it was diagnosed and determined that the totally integrated power module (TIPM) needed to be replaced. The vehicle was repaired. The contact stated that the horn was connected to the module. The manufacturer was notified of the failure and offered no assistance. The manufacturer referred the contact to the federal safety agency Hotline to report the failure. The approximate failure mileage was 106,000.

Filed Aug 28, 2024 · Engine, Transmission · SC

The contact owns a 2014 Chrysler 200. The contact stated while driving 45 MPH, the vehicle stalled on several occasions. The contact was able to pull over to the side of the road. The contact was able to restart the vehicle and continue driving. The vehicle was taken to the dealer but was not diagnosed or repaired. The vehicle was taken back to the residence. The manufacturer was not notified of the failure. The failure mileage was unknown.

Filed Jun 24, 2024 · Brakes, Electrical · MI

While driving this vehicle the car would shut down while driving, no ability to brake, to steer. The car would start back up, but the same issues would happen, making it extremely dangerous to drive. This happened on several different occasions. One of my issues with this problem is that Chrysler had the same issue with the 2015 Chrysler 200 and the 2015 was recalled. If you look at sites other than Chrysler, customers had reported the same problem with the 2014 and it looks like Chrysler just swept it under the rug. The dealership is saying that the TIPM system needs to be replaced on my car, for a cost of $3000.00 for a know problem.

Filed Mar 16, 2023 · Electrical, Engine · NJ

Horn didn’t work and car stalled in the middle of highway. Part (clock spring)inside horn was replaced but horn still went off by itself or didn’t work. Entire fuse box ( integrated power module)that controlled horn replaced to solve problem. It has been determined that this was also cause of car stalling out.

Filed Jul 19, 2022 · Engine · IN

The vehicle stalled out while driving on the interstate. No warnings and no engine lights came on. We were slowing down to a stop because of construction. The car is available if inspection is requested. I had the fuel system serviced with fuel pump replaced. It is unknown if the mechanic was able to confirm the stall out. I picked the vehicle up today and it seemed to run smoothly, then it stalled out driving thru an intersection without warning.

Filed Jul 27, 2021 · Engine · 103,417 miles · TX

The contact owns a 2014 Chrysler 200. The contact stated while driving approximately 40 mph, the vehicle stalled without warning. The contact was able to pull over and the vehicle was restarted but the vehicle stalled again without warning. The contact stated no warning light was illuminated. The vehicle was towed, diagnosed, and repaired but the failure persisted. The manufacturer was informed of the failure and told the contact that they were unable to assist. The failure mileage was approximately 103,417.

Filed Dec 3, 2020 · Electrical, Engine · 113,000 miles · TX

Tl* the contact owns a 2014 chrysler 200. The contact stated that while driving 20 MPH, the vehicle stalled without warning. The contact also stated that the RPM fell to zero and lost all power functionality including the steering and brake. The contact was able to coast to the side of the road, shifted into neutral, restarted and the vehicle operated as intended. The failure recurred. The contact stated that on several occasions the vehicle failed to start intermittently. The contact also stated that the vehicle stalled while making turns and that the horn would inadvertently blow while driving. The vehicle was taken to dallas dodge chrysler jeep ram (11550 lyndon b johnson fwy, dallas, tx 75238) to be diagnosed. The mechanic retrieved dtc code: p0190 (power control module) failed. The vehicle was repaired however, the failure recurred. The vehicle was not taken back to the dealer and was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 113,000.

Filed Sep 20, 2020 · Driver assistance, Electrical · 67,262 miles · FL

It shuts off while driving ..without no warning lights indicating that theres any problem.. The battery voltage is good and my alternator is good as well . It shut off on me more than three times.

Filed Aug 11, 2020 · Driver assistance · 110,000 miles · OH

Car will just randomly shut off while the car is cruising, accelerating, or decelerating. There are no warning lights, sounds, or visual cues to indicate any sort of problem. In addition to the engine, the power steering and brake assist will also shut down. After the stall: it doesn't trigger any error codes for an obd-ii reader, meaning technicians wont be able to diagnose the problem. Will do this at all speeds, even on the high way, or places that may not have a place to pull off. This is extremely unsafe and extremely dangerous.

Filed Jan 14, 2020 · Electrical, Engine · 108,000 miles · NJ

My chrysler 200 has been experiencing intermittent power loss and stalling. When driving the engine plus electrical power shuts down which leads to a loss of power steering. This situation almost caused a accident while on the freeway. In my research I have found many others who have the same complaint. The electrical system on this make/model has a 'very bad' rating on the federal safety agency website.

Filed Aug 7, 2017 · Electrical, Steering · 13,000 miles · CA

Tl* the contact owns a 2014 chrysler 200. The contact stated that the power steering failed and the vehicle stalled. The contact took the vehicle to the elkgrove dodge dealer where it was diagnosed that the power steering failed. The vehicle was repaired, but the contact was unsure of the exact repair. Recently, while driving, the vehicle suddenly stalled. The contact found that the stalling was due to the battery failing. The contact had the battery recharged and returned the vehicle to the dealer who replaced the battery. Shortly after the second repair, the power steering and battery suddenly failed. The contact had the vehicle towed to the dealer. The vehicle was not diagnosed or repaired a third time. The manufacturer was made aware of the failure and opened several cases regarding the matter. The approximate failure mileage was 13,000.

Filed Jul 20, 2017 · Airbags, Electrical · 53,000 miles · FL · crash · 1 injury

Tl* the contact owned a 2014 chrysler 200. While driving in the rain, the speed was unknown because the speedometer failed. The contact rear ended the preceding vehicle that had stalled and there were no warning indicators illuminated. The air bags failed to deploy. A police report was filed. The contact sustained a fractured right hip, bruising, lack of motion in the right wrist, a fractured left pelvis, bruising to the left knee, and severe bruising to the chest from hitting the windshield. Medical attention was received. The vehicle was towed to superior towing company (2385 sw 66th terrace, davie, fl, 33317) where is was declared totaled by the insurance company. The contact stated that she never received notification of the federal safety agency campaign number: 16v668000 (air bags, seat belts) and was not made aware of the recall notification until july 19, 2017 after searching online. The failure mileage was approximately 53,000....updated 08/07/17 *bf updated 08/11/17 *bf *cn