Odometer Fraud. The contact purchased a 2008 Chrysler 300. The contact discovered that there was a mileage discrepancy after purchasing the vehicle. The vehicle was a private sale. At the time of purchase, the vehicle's mileage was 136,000. It was later discovered upon checking a Carfax report with a local dealer, the mileage was 183,000.
The worst 2008 Chrysler 300 problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
- Electrical503
- Airbags185
- Engine78
- Transmission30
- Brakes22
- Steering18
- Acceleration12
- Fuel system11
- Suspension11
- Driver assistance10
- Visibility10
- Tires7
- Body5
- Lights5
- Seat belts3
- Locks2
- Seats1
- Wheels1
Specific symptoms reported on the 2008 Chrysler 300
Stalling 104Won't start 33Loss of power 19Engine failure 18No deployment 15Check engine light 15Key fob 14Hesitation 10Steering lock-up 7Fire or smoke 6Airbag light 5Ball joint 5Knocking 5Overheating 5
Recalls 4
Air bags: frontal: passenger side: inflator module
- What is wrong
- Chrysler (FCA US LLC) expanded the affected population to include 73,712 2005-2009 RAM 2500 trucks produced at the St. Louis North Assembly Plant. With this change, Chrysler is recalling certain model year 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2010 RAM 3500 Cab Chassis, 2008-2010 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge Durango, 2007-2009 Chrysler Aspen, 2007-2012 Jeep Wrangler, 2008-2012 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2012 Chrysler 300, 2006-2012 Dodge Charger, 2005-2011 Dodge Dakota, and 2006-2009 Mitsubishi Raider vehicles originally sold, or ever registered, in AL, CA, FL, GA, HI, LA, MS, SC, TX, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Chrysler is also recalling 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2009 RAM 3500 Cab Chassis, 2008-2009 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge Durango, 2007-2009 Chrysler Aspen, 2007-2009 Jeep Wrangler, 2008-2009 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2009 Chrysler 300, 2006-2009 Dodge Charger, 2005-2009 Dodge Dakota and 2006-2009 Mitsubishi Raider vehicles originally sold, or ever registered, in AZ, AR, DE, Washington D.C., IL, IN, KS, KY, MD, MO, NE, NV, NJ, NM, NC, OH, OK, PA, TN, VA, and WV, or "Zone B." Lastly, unless included in "Zone A" or "Zone B" above, Chrysler is recalling certain 2005-2008 RAM 2500, 2006-2008 RAM 3500, 2007-2008 RAM 3500 Cab Chassis, 2008 RAM 4500 and 5500 Cab Chassis, 2004-2008 Dodge Durango, 2007-2008 Chrysler Aspen, 2007-2008 Jeep Wrangler, 2008 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2008 Chrysler 300, 2006-2008 Dodge Charger, 2005-2008 Dodge Dakota, and 2006-2008 Mitsubishi Raider vehicles originally sold, or registered, in AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY.
- Risk
- These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. These inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
- Remedy
- Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify the Chrysler, Dodge, Jeep and RAM owners. Mitsubishi owners will be notified by their company. Dealers will replace the passenger frontal air bag inflator, free of charge. The recall began on March 27, 2017. Owners may contact Chrysler customer service at 1‑800‑853‑1403. Chrysler's number for this recall is S43. Note: This recall supersedes recall 14V-7700.
Recall number 16V352000 · Recall details
Air bags: frontal: driver side: inflator module
- What is wrong
- Chrysler (FCA US LLC) is recalling certain model year 2005-2009 Dodge Ram 2500, 2004-2008 Dodge Ram 1500 and Durango, 2006-2009 Dodge Ram 3500, 2008-2010 Dodge Ram 4500 and 5500, 2007-2008 Chrysler Aspen, 2005-2010 Chrysler 300, 300C, 300S, and SRT8, 2006-2010 Dodge Charger, 2005-2008 Magnum, 2005-2011 Dodge Dakota, and 2006-2009 Mitsubishi Raider vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture.
- Risk
- In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
- Remedy
- Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify the affected Chrysler and Dodge owners and Mitsubishi will notify the affected Raider owners. Dealers will replace the driver's frontal air bag inflator, free of charge. The recall began for Chrylser on June 8, 2015. The recall for Mitsubishi started on June 24, 2015. Chrysler and Dodge owners may contact Chrysler customer service at 1‑800‑853‑1403. Mitsubishi owners may call 1‑888‑648‑7820. Chrysler's number for this recall is R25. Note: This recall supersedes recall 14V817 in its entirety. Vehicles that have had their driver side frontal air bag replaced previously need to have their air bag replaced under this recall as well.
Recall number 15V313000 · Recall details
Electrical system: ignition
- What is wrong
- Chrysler Group LLC (Chrysler) is recalling certain model year 2008 Chrysler 300 vehicles manufactured May 31, 2007, to May 12, 2008, Dodge Magnum vehicles manufactured May 23, 2007, to May 12, 2008, Dodge Charger vehicles manufactured May 24, 2007, to May 12, 2008, Jeep Commander vehicles manufactured April 3, 2007, to May 12, 2008, and Jeep Grand Cherokee vehicles manufactured March 21, 2007, to May 12, 2008. In the affected vehicles, the ignition key (FOBIK) may not return to the "ON" position after being rotated to the "START" position, instead sticking between the two positions. Potentially, while the vehicle is being driven, the ignition may inadvertently move through the "RUN" position to the "ACCESSORY" or "OFF" ignition position, turning off the engine.
- Risk
- If the ignition stays between "START" and "ON" positions it could cause loss of certain electrical functions. If the ignition key inadvertently moves into the "OFF" or "ACCESSORY" position, the engine will turn off, which will then depower various key safety systems including but not limited to air bags, power steering, and power braking. Loss of functionality of these systems may increase the risk of crash and/or increase the risk of injury in the event of a crash.
- Remedy
- Chrysler will notify owners, and dealers will replace the ignition switch and key FOBs, free of charge. The recall began August 19, 2015. Owners may contact Chrysler customer service at 1‑800‑853‑1403. Chrysler's number for this recall is P57.
Recall number 14V567000 · Recall details
Power train: axle hubs
- What is wrong
- Chrysler is recalling 5,509 my 2008 300, dodge magnum, and charger vehicles. The torque retention crimp feature was missed during the manufacture of one lot of rear axle hub nuts. This could cause the nuts to loosen and allow the halfshaft to disengage from the wheel hub.
- Risk
- This could cause the vehicle to lose power and result in a crash without warning.
- Remedy
- Dealers will replace the rear axle hub nuts. The recall began on july 21, 2008. Owners may contact chrysler at 1‑800‑853‑1403.
Recall number 08V295000 · Recall details
See all 4 recalls for the 2008 Chrysler 300
Defect investigations
Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
EA21002
Technical service bulletins for the 2008 Chrysler 300 81
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- Pad kit - rear disc brake, front disc brake
- Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair...
- Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles
- NAG1 Transmission Before installing the transmission with the engine, check for dowel pins (2) for alignment
- This SKU is a Engine Heater Hose Assembly
- (Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
- Disinfectant Solution Recommended for COVID-19
- Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the...
- Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard...
- Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to...
2008 Chrysler 300 fuel economy
Official EPA estimates in miles per gallon (MPGe for electric). Ranges cover trims that share the same engine.
| Engine | Drive | City | Highway | Combined |
|---|---|---|---|---|
| 2.7L 6‑cyl | RWD | 18 | 26 | 21 |
| 3.5L 6‑cyl | RWD | 17 | 24 | 20 |
| 3.5L 6‑cyl | 4WD | 15 | 22 | 18 |
| 5.7L 8‑cyl | 4WD | 15 | 22 | 18 |
| 5.7L 8‑cyl | RWD | 15 | 23 | 18 |
| 6.1L 8‑cyl | RWD | 13 | 18 | 15 |
What 2008 Chrysler 300 owners say
Most recent owner complaints, unedited.
I informed the dealership of ignition switch recall shortly after purchasing vehicle. The dealership stated " the VIN number shows no recalls". And that was it said there nothing showing up. I KNOW ignition switch is messed up because every time I would turn the car off I could still feel it running. I've had my car a year and now it will not crank due to ignition switch and now fuel air intake is also messing up and has caused cylinder 6 to miss fire. I have been without a vehicle for a month now and I need it fixed. When test driving the car, it would slow down as I was turning into a place of business and almost getting hit by another vehicle.
The contact owns a 2008 Chrysler 300. The contact stated that the vehicle was repaired under the federal safety agency Campaign Number: 14V567000 (Electrical System); however, the repair failed to prevent a failure from occurring. The contact stated that several days after the recall repair was completed, the contact had to adjust the ignition switch to start the vehicle. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 68,000.
When taking vehicle for test drive about a month ago, the check engine light was on and after driving it, i noticed when AC was on and when off, the car loses power. When i go to pull out it has no power and i almost got hit in the side every time i would pull out from a busy highway. They had check engine light looked at and they said computer told them it was air valve leak or something like that. I had appointment for them to further assist and they said they could not find anything wrong. I can hear where the valve might be leaking at. The brakes are not good. I had to put on the brakes today fast and brake pedal acted like they were gonna skid out from under my foot. Brakes are new so why is it acting like i have no brakes and there is barley any acceleration. Something is going on and i don't want to be in a car accident just because our warnings are being over looked.
The contact owns a 2008 Chrysler 300. The contact received notification of the federal safety agency Campaign Number: 16V352000 (Air Bags) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
Dealer is unable to order the recalled air bag. I had it in to be fixed a month ago, verified with dealer they had the part before I made the appointment. Took it in and they advised it is on backorder. Called 1q/10 and they advised they are NOT ALLOWED to order the part. What am I supposed to do?
I don't know what had happened I was driving one day and my air bag light came on and it stayed on. Never been in a accident since I got the car had it since 2021
Hair like cracks above fuel pump! Constantly leaking gas n car stalling out!!!
For the axle or the wheel bearings or something like that every time I turn the wheel to a certain angle it pops also has hard vibration while driving the buttons have fallen off the seats the steering pulls to the right has rust by the gas tank 0102 since banks sensors have one out and has stopped starting occasionally have replaced key fob but it occasionally still happens and the flow sensor alert is coming on for the code airbag recall needs done the wheels pressure sensor gauge never turns off for the alert I've had to have my car towed three times because I'm non-start and engine light is still on also dangerously the heat shield had come apart on my car just recently 2020 super dangerous while driving
The dealer changed the ignition switch per the recall 14v567000 for the vehicle about 2-3 years ago for a different issue with the switch. My daughter was driving the car about week ago july 30, 2020, she said she was at a traffic light on a busy street (lincoln highway) in chicago heights il and when it turn green she attempted to go and the vehicle cutoff and would not start back up. I arrived to her location. Another driver had pushed her into a parking lot to get her out of the middle of the highway, I tried to start the car and it would not catch. It would crank put not turn over, I had to get it towed home. After some testing of components, spark, gas pressure and fuel pump it was diagnosed with a bad ignition switch with a p2533 code that stated there was a problem with the ignition switch run position signal. This is a very troubling event since my recently turn 18 daughter has no experience with this sort of thing and thankfully there was no accident or physical harm done. I spoken with a person at a chrylser dealership service department about manufacturer coverage but she did not have a clue and transferred my call to the parts department that stated it might run $800- 1,000.00 to replace the switch.
Compare the 2008 Chrysler 300
300 vs Ford Taurus300 vs Chevrolet Impala300 vs Nissan Maxima300 vs Dodge Charger300 vs Toyota Avalon300 vs Buick Lacrosse
Other model years
20042005200620072008200920102011201220132014201520162017201820192020202120222023
Questions about the 2008 Chrysler 300
Is the 2008 Chrysler 300 reliable?
Owners have filed 715 complaints about the 2008 Chrysler 300, 5.8 times a typical 300 model year. It is one of the years we flag to avoid.
What is the 2008 Chrysler 300 year score?
The 2008 Chrysler 300 scores 10 out of 100 (poor). The score compares it with the other model years of the Chrysler 300: 75 is a typical year, 50 means twice the usual complaints, and serious complaints and recalls lower it.
What is the most common problem with the 2008 Chrysler 300?
Electrical system, with 503 complaints, typically around 82,000 miles. Next is airbags (185).
How many recalls does the 2008 Chrysler 300 have?
4 recalls, covering air bags, electrical system and power train.
Was there a recall on the 2008 Chrysler 300 electrical?
Yes, 1 recall: 14V567000. Check your VIN to see if your car still needs the free repair.
What year does the Chrysler 300 have the most electrical problems?
The Chrysler 300 model years with the most electrical complaints are 2008 (503 complaints), 2012 (212 complaints) and 2013 (131 complaints).
What gas mileage does the 2008 Chrysler 300 get?
Official estimates for the 2008 Chrysler 300 range from 15 to 21 mpg combined. The most efficient version (2.7L 6-cyl, RWD) gets 18 city and 26 highway.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2008 Chrysler 300?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history