2016 Ford F-250 SD driver assistance problems

Filed Apr 6, 2026 · Driver assistance · 150,000 miles · AR

The contact owns a 2016 Ford F-250. The contact stated that the rear-view camera intermittently functioned properly but recently started displaying a blue screen. The local dealer was contacted starting in December 2025, but the contact was informed that parts for the federal safety agency Campaign Number: 25V572000 (Back Over Prevention) recall repair were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not informed of the failure. The failure mileage was approximately 150,000.

Filed Mar 20, 2026 · Driver assistance, Electrical · AL

The failure of the APIM has completely disabled the Rearview Backup Camera, which is a federally mandated safety feature (FMVSS No. 111). Operating a heavy-duty F-250 without a functional backup camera creates a significant blind-spot hazard and an immediate safety risk to pedestrians and property. King Ford has confirmed the failure. Service Director Jamie Churchwell has acknowledged the damage as "Consequential Damage" resulting directly from the attempted software update for Safety Recall 22S35. It is currently being reviewed by the Ford District Parts and Service Manager (as reported by the dealer) for a "Related Damage" warranty claim . The vehicle’s screen and backup camera were functioning perfectly prior to the recall service. The failure occurred at the dealership during the application of the manufacturer’s recall software update.

Filed Mar 18, 2026 · Driver assistance · 18,300 miles · NE

The contact owns a 2016 Ford F-250. The contact received notification of the federal safety agency Campaign Number: 25V572000 (Back Over Prevention); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. While shifted to reverse(R), the back over prevention camera intermittently displayed an image of the rear of the vehicle, but occasionally the screen was black. The dealer was contacted and confirmed that the part for the recall repair was unavailable. The manufacturer was contacted; however, the contact was unable to speak with a representative. The failure mileage was approximately 18,300.

Filed Feb 11, 2026 · Driver assistance · 100,000 miles · CA

The contact owns a 2016 Ford F-250. The contact stated that while reversing, the back over prevention system was inoperable. The contact received notification of the federal safety agency Campaign Number: 25V572000 (BACK OVER PREVENTION); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was 100,000.

Filed Nov 6, 2025 · Driver assistance, Steering · FL

The contact owns a 2016 Ford F-250. The contact received notification of the federal safety agency Campaign Number: 25V572000 (BACK OVER PREVENTION). However, the part to do the recall repair was not yet available. The contact stated that the rearview camera displayed a white screen while the vehicle was in reverse(R). The contact stated that the failure obstructed the driver's visibility, which prevented the driver from safely operating the vehicle. The message to "Contact Your Local Dealer" was displayed on the instrument panel. The local dealer was not contacted. The contact stated that on a separate occasion, while driving at an undisclosed speed, the vehicle drove over a speed bump or pothole, and the steering wheel vibrated. No warning lights were illuminated. The contact used force to control the steering wheel. The vehicle was taken to the dealer; however, no cause for the failure was found. The contact stated that an alignment was performed, and an unknown repair to the exterior lighting was also performed. The contact stated that the failure persisted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was unknown.

Filed Oct 23, 2025 · Driver assistance · 14,611 miles · TX

The contact owns a 2016 Ford F-250. The contact stated that while reversing, the rear-view camera failure warning light illuminated. In addition, the contact stated that the error message instructed the contact to reach out to the local dealer. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact received notification of the federal safety agency Campaign Number: 25V572000 (Back Over Prevention); however, the part to repair the vehicle was not available. The manufacturer was not made aware of the failure. The failure mileage was approximately 14,611.

Filed Oct 16, 2025 · Driver assistance · 200,000 miles · TX

The contact owns a 2016 Ford F-250. The contact stated that the rearview camera intermittently failed to operate as needed. The contact stated that the camera occasionally displayed a blank or distorted image while the vehicle was in reverse(R). The contact received notification of the federal safety agency Campaign Number: 25V572000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was not made aware of the issue. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 200,000.

Filed May 5, 2025 · Driver assistance · MO

No accident Backup camera does not work most of the time

Filed Feb 6, 2024 · Brakes, Driver assistance · OH

Vehicle has 44,000 miles, has never been wrecked in any way. Recently the advance trac system began displaying a fault at random. The light would come and go. At the time the fault light was active the turn signals did not operate normally. A message noted to service advance trac system. ( which is related to the abs) I noticed, once, the abs activate momentarily for no apparent reason. I narrowed the fault down to the steering wheel angle sensor. I had a Ford service center confirm the issue was the steering angle sensor. The sensor was on a backorder. I called around and other dealers confirmed. A week later while entering a cloverleaf and slowing down the system faulted, illuminated the error, and the abs activated. The brake system applied brakes unevenly pulling the vehicle to the left then right and aggressively slowing down without driver brake input. I had to fight to control the vehicle to prevent losing control or get rear ended. The roads were clean, dry, and it was daylight. Upon that i could see the complete loss of steering wheel angle sensor input. The dash can show this readout. Without the steering wheel angle input the system, which is to prevent accidents, nearly caused one. I tried turning off the advance trac via the traction control button, this was ineffective. I had to remove the abs pump fuse to get home safely. This system should not in any way be able to cause this severe loss of vehicle control simply due to the loss of one sensor. This is absolute unsafe software protocall. Attatched are images of the sensor reading then no place holder for it when it does not read.

Filed Jun 10, 2020 · Driver assistance, Electrical · MS

The dash cluster cuts off while driving as well as radio and air conditioning.