2021 Ford Mustang Mach E: loss of power steering

Filed Jun 10, 2025 · Acceleration, Brakes · NJ

Was driving and suddenly all errors started popping up Hill start assist warning 1 pedal driving unavailable Pre collision assist not available Antilock brake fault, etc Lost braking power, steering got stiff, accelerated suddenly.

Filed Aug 14, 2024 · Electrical, Fuel system · NY

Driving in a 40mph zone and car suddenly lost all power followed by a message stop safetly now and the 12v battery icon. While coasting car lost power steering and upon stopping went into park and would not go into neutral for 30+ minutes

Filed Aug 22, 2023 · Electrical, Fuel system · NV

The HVBJB subassembly in ALL Ford Mach-e vehicles has known defects with 'under-designed' main contacts that are known to fail under normal charging and driving conditions as outlined in current open Ford recall notice. Unfortunately, the internal damage to contactors is not visible externally, and warning notices on display only AFTER the damage has occurred, and can result in sudden loss of propulsion power at highway speed, loss of power steering, and power brakes... and failure of other 12v systems due to failure to charge the 12v battery properly after contacts are damaged. Less catastrophic results can include failure to start; which can 'strand' driver's and passengers in remote areas, bad weather conditions, as well as cause loss of use for weeks due to delays in replacement parts and local Dealerships needing equipment and training to effect removal/replacement of faulty unit with a new HVBJB having re-designed 'beefier' components.​ ​ My complaint is that Ford's recall notice 22s41 is a software-only attempt to prevent future damage, and does not require removal of the part(s) which are KNOWN TO FAIL to be replaced with the re-designed components which are available, and have been used to repair failures under warranty. I have no way of inspecting the original equipment to evaluate current condition; and failure can result in sudden and unexpected loss of power, steering, and braking as well as potentially 'stranding me' in unsafe conditions unable to re-start my vehicle.​ ​ I would like to see the federal safety agency strengthen the Ford recall to include both improved software AND removal/replacement of the HVBJB sub-assembly with the new 'beefier' parts.​

Filed Nov 10, 2022 · Acceleration, Brakes · CA

* On October 16th, 2022, at about 7:00 pm, I was driving my 2021 Ford Mach-E GT when we began to change lanes (we were in the left lane heading East) as the vehicle in front of us slowed down to make a left-hand turn. There was a car behind us and two vehicles in the right lane (two-lane road in each direction) that were a few car lengths behind us as we began to change into that lane. When I turned on my signal and turned the steering wheel, I pressed the gas pedal to accelerate to get around the car in front of me to keep my distance from the vehicles in the lane I was transitioning into. Unfortunately, when I pressed the gas pedal, we experienced complete vehicle failure. I had no steering, brakes, or acceleration. Within a short time (30-45 minutes), we had no power as the lights on the vehicle, and all electrically powered devices and components were entirely out. This made it very difficult to tow the car as it is all-wheel drive, and we could not put it in Neutral to pull the vehicle. As this happened, five cars were in the area, and several had to swerve and fly off the road onto the dirt shoulder. We barely missed the car in front of us, and the car behind us had to lock up its breaks not to hit us. Our car gradually slowed down and cost off the road about 50 yards or so after losing power, as it was very difficult to get the vehicle to steer; it took everything I had to turn the wheel to get it off the road. We put on the emergency blinkers, but the vehicle lights flashed erratically inside and outside the car. We had over a dozen warnings flash on our dashboard about vehicle failure. The speakers in the car were making a thumping sound on their own as the car was flashing headlights, brake lights, and flashers on their own and very sporadically. It was like a disco club in the car as all the lights were flashing on and of at a rapid rate. The other cars stoppe and were very angry at us as the screamed at us that we almost caused an accident.

Filed Jul 31, 2022 · Electrical, Fuel system · MO

On May 14, 2022, I stopped twice on a 120 mile trip to recharge my Mach E at a level 3 DC charger. Upon completing each charge, the ring around the charging port turned red and I received a default message. I plugged my car into my home level 2 charger and the car completely locked down and I was unable to reenter the car. I have since learned that this is the classic sign of a HVBJB failure. The dealerships updated the car's programming but did not replace the HVBJB. The HVBJB subassembly in ALL Ford Mach-e vehicles has known defects with 'under-designed' main contactors that are known to fail under normal charging and driving conditions as outlined in current open Ford recall notice for my vehicle 22s41. Unfortunately, the internal damage to contactors is not visible externally, and warning notices on display only after damage has occurred, and can result in sudden loss of propulsion power at highway speed, loss of power steering, and power brakes... and failure of other 12v systems due to failure to charge the 12v battery properly after contactors are damaged. Less catastrophic results can include failure to start; which can 'strand' driver's and passengers in remote areas, bad weather conditions, as well as cause loss of use for weeks due to delays in replacement parts and local Dealerships needing equipment and training to effect removal/replacement of faulty unit with a new HVBJB having re-designed 'beefier' components.​ ​ My complaint is that Ford's recall notice 22s41 is a software-only attempt to prevent future damage, and does not require removal of the part(s) which are KNOWN TO FAIL to be replaced with the re-designed components which are available, and have been used to repair failures under warranty. I have no way of inspecting the original equipment to evaluate current condition; and failure can result in sudden and unexpected loss of power, steering, and braking as well as potentially 'stranding me' in unsafe conditions.

Filed Jul 22, 2022 · Brakes, Electrical · TX

The HVBJB subassembly in ALL Ford Mach-e vehicles has known defects with 'under-designed' main contactors that known to fail under normal charging and driving conditions as outlined in current open Ford recall notice for my vehicle 22s41. Any internal damage to contactors is not externally visibley, and warning notices on display only after damage has occurred, and can result in sudden loss of propulsion power at highway speed, loss of power steering, power brakes and failure of other 12v systems due to failure to charge the 12v battery properly after contactors are damaged. Less catastrophic results can include failure to start; which can 'strand' driver's and passengers in remote areas, bad weather conditions, as well as cause loss of use for weeks due to delays in replacement parts and local Dealerships NEED equipment and training to effect removal/replacement of faulty unit with a new HVBJB having re-designed 'beefier' components.​ ​ My complaint is that Ford's recall notice 22s41 is a software-only band aid and does not require removal of the parts KNOWN TO FAIL. These parts should be replaced with the re-designed components which are available, and have been used to repair failures under warranty. I have no way of inspecting the original equipment to evaluate current condition; and failure can result in sudden and unexpected loss of power, steering, and braking as well as potentially 'stranding me' in unsafe conditions unable to re-start my vehicle.​ I suffered a failure related to this post-recall and had a sudden and permanent loss of power while driving at Texas highway speeds (70mph) in congested morning traffic. Fortunately I was able to make my way off the highway but other conditions could have ended up worse. ​ Software "fixes" are not the solution and the actual problem of the defective parts need to be replaced in the affected models to avoid possible injuries and fatalities from these vehicles.

Filed Jul 21, 2022 · Electrical, Fuel system · VA

The HVBJB subassembly in ALL Ford Mach-e vehicles has known defects with 'under-designed' main contactors that are known to fail under normal charging and driving conditions as outlined in current open Ford recall notice for my vehicle 22s41 the federal safety agency Campaign Number: 22V412000. Unfortunately, the internal damage to contactors is not visible externally, and warning notices on display only after damage has occurred, and can result in sudden loss of propulsion power at highway speed, loss of power steering, and power brakes... and failure of other 12v systems due to failure to charge the 12v battery properly after contactors are damaged. Less catastrophic results can include failure to start; which can 'strand' driver's and passengers in remote areas, bad weather conditions, as well as cause loss of use for weeks due to delays in replacement parts and local Dealerships needing equipment and training to effect removal/replacement of faulty unit with a new HVBJB having re-designed 'beefier' components.​ ​ My complaint is that Ford's recall notice 22s41 ( the federal safety agency Campaign Number: 22V412000) is a software-only attempt to prevent future damage, and does not require removal of the part(s) which are KNOWN TO FAIL to be replaced with the re-designed components which are available, and have been used to repair failures under warranty. I have no way of inspecting the original equipment to evaluate current condition; and failure can result in sudden and unexpected loss of power, steering, and braking as well as potentially 'stranding me' in unsafe conditions unable to re-start my vehicle.​ ​ I would like to see the federal safety agency strengthen the Ford recall to include both improved software AND removal/replacement of the HVBJB sub-assembly with the new 'beefier' parts.

Filed Jul 21, 2022 · Electrical, Fuel system · IL

The HVBJB subassembly in ALL Ford Mach-e vehicles has known defects with 'under-designed' main contactors that are known to fail under normal charging and driving conditions as outlined in current open Ford recall notice for my vehicle 22s41. Unfortunately, the internal damage to contactors is not visible externally, and warning notices on display only after damage has occurred, and can result in sudden loss of propulsion power at highway speed, loss of power steering, and power brakes... and failure of other 12v systems due to failure to charge the 12v battery properly after contactors are damaged. Less catastrophic results can include failure to start; which can 'strand' driver's and passengers in remote areas, bad weather conditions, as well as cause loss of use for weeks due to delays in replacement parts and local Dealerships needing equipment and training to effect removal/replacement of faulty unit with a new HVBJB having re-designed more robust components that conform to higher electrical standards. ​ My complaint is that Ford's recall notice 22s41 is a software-only attempt to prevent future damage, and does not require removal of the part(s) which are KNOWN TO FAIL to be replaced with the re-designed components which are available, and have been used to repair failures under warranty. I have no way of inspecting the original equipment to evaluate current condition; and failure can result in sudden and unexpected loss of power, steering, and braking as well as potentially 'stranding me' in unsafe conditions unable to re-start my vehicle.​ ​ I would like to see the federal safety agency strengthen the Ford recall to include both improved software AND removal/replacement of the HVBJB sub-assembly with the new more robust parts.​

Filed Jul 20, 2022 · Acceleration, Electrical · NJ

The HVBJB subassembly in ALL Ford Mach-e vehicles has known defects with 'under-designed' main contactors that are known to fail under normal charging and driving conditions as outlined in current open Ford recall notice for my vehicle 22s41. Unfortunately, the internal damage to contactors is not visible externally, and warning notices on display only after damage has occurred, and can result in sudden loss of propulsion power at highway speed, loss of power steering, and power brakes... and failure of other 12v systems due to failure to charge the 12v battery properly after contactors are damaged. Less catastrophic results can include failure to start; which can 'strand' driver's and passengers in remote areas, bad weather conditions, as well as cause loss of use for weeks due to delays in replacement parts and local Dealerships needing equipment and training to effect removal/replacement of faulty unit with a new HVBJB having re-designed 'beefier' components.​ ​ My complaint is that Ford's recall notice 22s41 is a software-only attempt to prevent future damage, and does not require removal of the part(s) which are KNOWN TO FAIL to be replaced with the re-designed components which are available, and have been used to repair failures under warranty. I have no way of inspecting the original equipment to evaluate current condition; and failure can result in sudden and unexpected loss of power, steering, and braking as well as potentially 'stranding me' in unsafe conditions unable to re-start my vehicle.​ ​ I would like to see the federal safety agency strengthen the Ford recall to include both improved software AND removal/replacement of the HVBJB sub-assembly with the new 'beefier' parts.

Filed Jul 17, 2022 · Electrical, Fuel system · CA

The HVBJB subassembly in ALL Ford Mach-e vehicles has known defects with 'under-designed' main contactors that are known to fail under normal charging and driving conditions as outlined in current open Ford recall notice for my vehicle 22s41. Unfortunately, the internal damage to contactors is not visible externally, and warning notices on display only after damage has occurred, and can result in sudden loss of propulsion power at highway speed, loss of power steering, and power brakes... and failure of other 12v systems due to failure to charge the 12v battery properly after contactors are damaged. Less catastrophic results can include failure to start; which can 'strand' driver's and passengers in remote areas, bad weather conditions, as well as cause loss of use for weeks due to delays in replacement parts and local Dealerships needing equipment and training to effect removal/replacement of faulty unit with a new HVBJB having re-designed 'beefier' components. My complaint is that Ford's recall notice 22s41 is a software-only attempt to prevent future damage, and does not require removal of the part(s) which are KNOWN TO FAIL to be replaced with the re-designed components which are available, and have been used to repair failures under warranty. I have no way of inspecting the original equipment to evaluate current condition; and failure can result in sudden and unexpected loss of power, steering, and braking as well as potentially 'stranding me' in unsafe conditions unable to re-start my vehicle. I have no confidence taking this car far from home with my family until a real fix is instituted. I would like to see the federal safety agency strengthen the Ford recall to include both improved software AND removal/replacement of the HVBJB sub-assembly with the new 'beefier' parts.

Filed Jul 8, 2022 · Electrical, Fuel system · WA

The HVBJB subassembly in ALL Ford Mach-e vehicles has known defects with 'under-designed' main contactors that are known to fail under normal charging and driving conditions as outlined in current open Ford recall notice for my vehicle 22s41. Unfortunately, the internal damage to contactors is not visible externally, and warning notices on display only after damage has occurred, and can result in sudden loss of propulsion power at highway speed, loss of power steering, and power brakes... and failure of other 12v systems due to failure to charge the 12v battery properly after contactors are damaged. Less catastrophic results can include failure to start; which can 'strand' driver's and passengers in remote areas, bad weather conditions, as well as cause loss of use for weeks due to delays in replacement parts and local Dealerships needing equipment and training to effect removal/replacement of faulty unit with a new HVBJB having re-designed 'beefier' components.​ ​ My complaint is that Ford's recall notice 22s41 is a software-only attempt to prevent future damage, and does not require removal of the part(s) which are KNOWN TO FAIL to be replaced with the re-designed components which are available, and have been used to repair failures under warranty. I have no way of inspecting the original equipment to evaluate current condition; and failure can result in sudden and unexpected loss of power, steering, and braking as well as potentially 'stranding me' in unsafe conditions unable to re-start my vehicle.​ I would like to see the federal safety agency strengthen the Ford recall to include both improved software AND removal/replacement of the HVBJB sub-assembly with the new 'beefier' parts

Filed Jul 7, 2022 · Electrical, Fuel system · NM

The HVBJB subassembly in ALL Ford Mach-e vehicles has known defects with 'under-designed' main contactors that are known to fail under normal charging and driving conditions as outlined in current open Ford recall notice for my vehicle 22s41. Unfortunately, the internal damage to contactors is not visible externally, and warning notices on display only after damage has occurred, and can result in sudden loss of propulsion power at highway speed, loss of power steering, and power brakes... and failure of other 12v systems due to failure to charge the 12v battery properly after contactors are damaged. Less catastrophic results can include failure to start; which can 'strand' driver's and passengers in remote areas, bad weather conditions, as well as cause loss of use for weeks due to delays in replacement parts and local Dealerships needing equipment and training to effect removal/replacement of faulty unit with a new HVBJB having re-designed 'beefier' components. My complaint is that Ford's recall notice 22s41 is a software-only attempt to prevent future damage, and does not require removal of the part(s) which are KNOWN TO FAIL to be replaced with the re-designed components which are available, and have been used to repair failures under warranty. I have no way of inspecting the original equipment to evaluate current condition; and failure can result in sudden and unexpected loss of power, steering, and braking as well as potentially 'stranding me' in unsafe conditions unable to re-start my vehicle. I would like to see the federal safety agency strengthen the Ford recall to include both improved software AND removal/replacement of the HVBJB sub-assembly with the new 'beefier' parts.