2019 GMC Sierra 1500: adaptive cruise control problems

Filed Oct 5, 2026 · Engine, Transmission · 120,500 miles · TX

The contact owns a 2019 GMC Sierra 1500. While driving 65 MPH with cruise control activated, the messages "Service ESC", "Service Park Brake", and an unknown message was displayed, causing the cruise control to deactivate. The check engine and transmission warning lights illuminated. The vehicle was jerking and the transmission was lagging while driving. The vehicle was taken to the dealer, who determined that the camshaft and lifter needed to be replaced. The manufacturer was notified of the failure by phone and advised the contact to file a complaint with the federal safety agency Hotline. The failure mileage was approximately 120,500.

Filed Dec 24, 2025 · Electrical, Engine · MS

I was driving up the road truck cranked up fine started a morning commute, on cruise control the truck instantly out of nowhere lost power completely with no signs of anything and engine won’t attempt to turn over now. I fear the worst has happened which would be catastrophic internal failure for to a faulty engine & its internals.

Filed Nov 23, 2025 · Electrical, Engine · IL

Complete engine failure. I was driving approximately 55 miles an hour, then all of a sudden the cruise control automatically shut off and a series of alarms are triggered. When pressing the accelerator pedal, the engine vibrated excessively in Cleary indicated catastrophic engine failure. I was lucky enough to make it to the nearby dealer who confirmed a complete engine failure. I ended up buying a new vehicle that day to avoid being stranded.

Filed Aug 5, 2025 · Engine · CA

While traveling on the freeway at freeway speeds and with the cruise control on, on 7/22/2025, my vehicle abruptly start making an odd noise, the steering wheel started to vibrate / move as if I had a flat tire. I safely existed the freeway and pulled over to investigate, there was no flat tire yet the vehicle still made the noise and experienced issues when the throttle was applied. I proceeded to call a tow truck, and have the vehicle towed from Alpine, CA to Temecula and Temecula Valley GMC. While there the dealership gave me an initial diagnosis of "Miss fire in cylinder 8". We left the vehicle, and awaited more information. The next day I received a phone call stating that they needed to do an engine teardown to completely diagnose the issue, to the tune of approx. $1,500. In the dealers words, they needed to do the teardown to determine if "They could salvage the engine, or if it had to be condemned". The following day I received another call stating that the engine needed to be completely replaced due to a collapsed cylinder. The estimate for this work is over $13,000. the truck is 6 years old with 58,XXX miles.

Filed Apr 30, 2025 · Engine · TX

I was experiencing rough gear shifting jumps and low power/acceleration but it was spotty and not continuous. While I was traveling on cruise control, my truck started misfiring. Once I got home the whole truck was shaking in place. I popped the hood and noticed the engine itself was shaking on the motor mounts. On the way to the mechanic, several lights (including check engine light) came on (the codes thrown were P0300-P0308). The mechanic attempted to clean the fuel injectors (that were replaced 30k miles go due to failure as well), but that did not solve the misfire. I was told the cylinder was dead, and upon inspection of the oil filter there were metal shavings throughout it and the engine, as well as a bent cam shaft. All symptoms and issues I've experience, which resulted in a complete engine swap, are similar to those of the 2021-2024 GMC Sierra 6.2L engines that were just recalled. I would like to know how many other 2019-2020 5.3L engines have had failure before 90k due to similar issues and if there is a larger concern here.

Filed Dec 22, 2024 · Acceleration, Electrical · TX

When accelerating it will over rev and then slip and then punch foward I had a diagnostic did and the sensor in the Transmission aren't working properly and then when just driving my etrak also randomly went out and I can no longer active cruise controll

Filed May 8, 2023 · Suspension · MA

Driver's side front wheel assembly separated from the vehicle. It was hard to tell exactl what happened but I am told that it may have been a ball joint failure. I was driving in the middle lane on the highway with cruise control set to 70MPH. All of a sudden, my truck jumped up and my truck starting pushing towards the left median. I thought I had a tire blow out. Luckily there wasn't anyone in the left lane at the time and I was able to get to the grassy left median. If there was another vehicle in the left lane and or if the left median wasn't grass, this would have caused a major accident as I has no control over where the truck was going. When I got out I saw that my entire wheel had separated from the vehicle and it was on its face under the truck. I did not hit a pothole. There was no prior indication that anything was wrong with the assembly. A tow truck was called and brought the truck back to their shop. The assembly had to be replaced, (ball joint, axel, steering control arms etc.). I called my local GMC dealer and they have nothing being reported of this issue but when I looked online I've seen multiple reports of premature failures of ball joints. Total repairs so far have been $3,400.00 and I still need to replace a cracked rim. Repairs will be over $4,000 when all said and done.

Filed Jan 7, 2020 · Electrical · 800 miles · MS

Cruise control would not disengage when the brake was applied I was on a highway traveling 65 MPH. Had to take an exit ramp to avoid a collision with vehicle in front of and beside me.